The paper studies physical and mechanical properties of tungsten-nickel-iron-cobalt metal foam alloyed with titanium tungsten carbide. Test specimens are obtained by the liquid phase sintering of powder materials, including those containing tungsten nanopowders. High porosity metal foams are prepared through varying the porosity of powder specimens and the content of filling material. The penetration capability of cylinder projectiles made of new alloys is explored in this paper. It is shown that their penetration depth exceeds that of the prototype with relevant weight and size, made of tungsten-nickel-iron alloy, other factors being equal.
Similar content being viewed by others
References
S. A. Afanas'eva, N. N. Belov, K. I. Kozorezov, et al., Doklady Akademii Nauk, 355, No. 2, 192–195 (1997).
S. A. Afanas'eva, N. N. Belov, Yu.A. Biryukov, et al., Russ. Phys. J., 55, No. 11, 1278-1283 (2013).
A. N. Tabachenko, L.S. Martsunova, A.B. Skosyrskii, et al., Russ. Phys. J., 54, No. 10, 1121-1127 (2012).
Ya. E. Geguzin, Physics of Sintering [in Russian], Nauka, Мoscow (1984).
R. A. Andrievskii, Introduction to Powder Metallurgy [in Russian], ILIM, Frunze (1988).
P. L. Radchenko, Yu. I. Podrezov, V. V. Panichkina, and V. V. Skorokhod, Poroshk. Metallurg., No. 8, 36–41 (1990).
A. N. Ishchenko, S. A. Afanas'eva, N. N. Belov, et al., in: Proc. IV All-Russian Conf. ‘Basics of Ballistic Design’, St-Petersburg (2014), pp. 152–155.
V. A. Burakov, V. V. Burkin, A. N. Ishchenko, et al., Experimental Ballistic Complex, RF Patent No. 2591132 (June 20, 2016).
N. T. Yugov, N. N. Belov, and A. A. Yugov, Three-Dimensional Simulation of Nontypical Adiabatic Flows (RANET-3), RF Certificate of State Registration of Software, No. 2010611042 (2010).
Yu. A. Biryukov, A. T. Roslyak, P. N. Zyatikov, et al., Method of Pneumatic Classification of Powder Materials and Implementation Device, RF Patent No. 127–3199 (1997).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 10, pp. 146–152, October, 2017.
Rights and permissions
About this article
Cite this article
Ishchenko, A.N., Tabachenko, A.N., Afanas’eva, S.A. et al. Physical and Mechanical Properties of W-Ni-Fe-Co Metal Foam Modified by Titanium Tungsten Carbide Alloying. Russ Phys J 60, 1811–1818 (2018). https://doi.org/10.1007/s11182-018-1286-9
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-018-1286-9