Features of laser modification of a ceramic surface layer based on aluminum oxide under action of continuous laser radiation are studied. The effect of a continuous laser action regime on track formation geometric parameters, and oxide ceramic surface layer morphology and defectiveness is determined. The main types of recurrent microstructures formed within a ceramic modified surface layer are identified and studied.
Similar content being viewed by others
References
S. Costil, S. Lukat, C. Langlade, and C. Coddet, “Surface modification of ceramic matrix composites induced by laser treatment,” Applied Surface Science, 255, 2425 – 2432 (2008).
Anoop N. Samant and Narendra B. Dahotre Samant, “Laser machining of structural ceramics — a review,” J. Europ. Ceram. Soc., 29, 969 – 993 (2009).
Jinlong Yang, Juanli Yu, Yuanyuan Cui, and Yong Huang, “New laser machining technology of Al2O3 ceramic with complex shape,” Ceram. Internat., 38, 3643 – 3648 (2012).
S. A. Pyachin, M. A. Pugachevskii, and A. B. Pagubko, New Technology for Preparing Functional Nanomaterials: Laser Ablation, Electric Spark Action [in Russian], TOGU, Khabarovsk (2014).
V. V. Kuzin, “Effective use of high density ceramic for manufacture of cutting and working tools,” Refract. Indust. Ceram., 51(6), 421 – 426 (2010).
V. V. Kuzin, S. N. Grigor’ev, S. Yu. Fedorov, “Wear of nitride ceramic inserts in machining gray cast iron castings,” Russ. Eng. Res., 33(6), 343 – 347 (2013).
V. V. Kuzin, S. N. Grigor’ev, M. Yu. Fedorov, et al., “Effect of pulsed laser radiation on the surface of ceramic VOK71,” Refract. Indust. Ceram., 56(4), 390 – 393 (2015).
V. V. Kuzin, M. R. Portnoi, S. Yu. Fedorov, and N. R. Portnoi, “Features of pulsed laser radiation action on a ceramic VOK71 surface in water,” Refract. Indust. Ceram., 56(4), 394 – 397 (2015).
V. Kuzin, S. Grigoriev, and M. Fedorov, “Surface modification of zirconia (Y-TZP) ceramics induced by pulsed laser machining,” Appl. Mechan. Mater., 752/753, 481 – 484 (2015).
V. V. Kuzin, S. N. Grigor’ev, and M. R. Portnoi, “The influence of heat flow on the nonuniformity of the stresses in the surface of oxide ceramic with fully developed relief,” Refract. Indust. Ceram., 56(3), 314 – 317 (2015).
V. V. Kuzin, S. N. Grigor’ev, and V. N. Ermolin, “Stress inhomogeneity in a ceramic surface layer under action of an external load. Part 2. Effect of thermal loading,” Refract. Indust. Ceram., 54(6), 497 – 501 (2014).
V. V. Kuzin, S. N. Grigoriev, and M. Yu. Fedorov, “Role of the thermal factor in the wear mechanism of ceramic tools. Part 2. Microlevel,” J. Friction and Wear, 36, 40 – 44 (2015).
This work was carried out with financial support of the Russian Federation Ministry of Education and Science within the scope of a state assignment in the sphere of scientific activity (assignment No. 2014/105, project No. 1908).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 1, pp. 50 – 55, January, 2016.
Rights and permissions
About this article
Cite this article
Kuzin, V.V. Oxide Ceramic Surface Layer Modification Using Continuous Laser Radiation. Refract Ind Ceram 57, 53–58 (2016). https://doi.org/10.1007/s11148-016-9927-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-016-9927-4