Results are given for development of an aluminiferous binder based on aluminothermal production slags. Binders are modified with additives based on polycarboxylate esters. Properties of the binders developed and cellular heat-resistant concretes are provided.
Similar content being viewed by others
References
T. V. Kuznetsova and I. Talaber, Alumina Cement [in Russian], Stroizdat, Moscow (1988).
K. D. Nekrasov and A. N. Abyzov, “Heat-resistant concretes based on ferroalloy slags,” in: Physicochemical and Production Bases of Heat-Resistant Cements and Concretes [in Russian], Nauka, Moscow (1986).
A. N. Abyzov, V. M. Rytvin, V. A. Abyzov, V. A. Perepelitsyn, and V. G. Grigor’ev, “Heat-resistant and refractory concretes based on binders and fillers from ferroalloy production slags,” in: Proc. Internat. Congr. “Fundamental bases of processing technology and utilization of technogenic waste”, UIPTs, Ekaterinburg (2012).
A. S. Dubrovin, G. I. Zaldat, G. F. Ignatenko, et al., “Preparation of high-alumina cement clinker for chromium and ferrotitanium melting slags,” in: Ferroalloy Production [in Russian], Yuzh.-Ural Kniga Izd., Chelyabinsk (1972).
A. N. Abyzov, V. A. Perepelitsyn, V. M. Rytvin, et al., “Binder from slag of aluminothermal melting of carbon-free ferrochromium for heat-resistant and refractory concretes,” Ogneupory Tekhn. Keram., No. 3, 50 – 52 (2008).
V. M. Rytvin, V. A. Perepelitsyn, V. A. Abyzov, et a.l., “Practice of processing and using ferroalloy aluminothermal slags,” Ogneupory Tekhn. Keram., No. 10, 38 – 43 (2013).
Kh. Khotter, K. Vunts, and I. Saierl’, “Use of polycarboxylate esters as deflocculants in refractory concretes,” Ogneupory Tekhn. Keram., No. 12, 43 – 47 (2007).
Kh.-G. Khauk, “Highly effective superplastifiers based on polycarboxylate esters. Application potential in contemporary concrete technology,” in: Concrete, raw material, operating technology: Proc. Internat. Sci.-Tech. Conf. “ConLife”, St. Petersburg (2007).
V. A. Abyzov, “Features of high-alumina cement hydration based on aluminothermic production slags with addition of superplastifiers,” Ogneupory Tekhn. Keram., No. 4 / 5, 80 – 84 (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 7, pp. 43 – 47, July 2015.
Rights and permissions
About this article
Cite this article
Abyzov, V.A., Rechkalov, D.A. & Chernogorlov, S.N. Modified Binders from Aluminothermal Production Slags and Cellular Heat-Resistant Concretes Based on Them. Refract Ind Ceram 56, 386–389 (2015). https://doi.org/10.1007/s11148-015-9852-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-015-9852-y