Abstract
Three structures of lead halide perovskite quantum dot (QD) solar cells with different absorbing layers of CsPbI3, FAPbI3, and CsPbI3/ FAPbI3 were simulated by SCAPS (Abdelaziz et al. in Opt Mater 10:10973, 2020; Karthick et al. in Sol Energy205:349–357, 2020; Verschraegen and Burgelman in Thin Solid Films 515:6276–6279, 2007). First, a device with a CsPbI3 QD absorber with a bandgap of 1.76 eV was simulated and power conversion efficiency (PCE) of 11.92% was obtained. Then, a device with a different absorber, the FAPbI3 QD layer with a band gap of 1.62 eV was simulated and we observed that the PCE was reduced to 9.50%. The narrower bandgap perovskite (FAPbI3) leads to an increase in the short circuit current density from 13.22 mA/cm2 to 14.87 mA/cm2. Finally, the bilayer of the CsPbI3/FAPbI3 structure was used as absorbing layers and a PCE of 18.55% was obtained. This increase in power conversion efficiency could be attributed to more efficient charge extraction. The physical mechanisms occurring in the devices were discussed in detail.
Similar content being viewed by others
References
Abadi, N.M.S., Banihashemi, M., Kashaninia, A.: Simulation and Analysis of a Perovskite Solar Cell with (FAPbI 3) 0.85 (MAPbBr 3) 0.15 as Absorber Layer. In: 2019 27th Iranian Conference on Electrical Engineering (ICEE). pp. 173–177. IEEE (2019)
Abdelaziz, S., Zekry, A., Shaker, A., Abouelatta, M.: Investigating the performance of formamidinium tin-based perovskite solar cell by SCAPS device simulation. Optical Materials 101, 109738 (2020)
Adnan, M., Mehboob, M.Y., Hussain, R., Irshad, Z.: In silico designing of efficient C-shape non-fullerene acceptor molecules having quinoid structure with remarkable photovoltaic properties for high-performance organic solar cells. Optik 241, 166839 (2021)
Ahmed, S., Jannat, F., Khan, M.A.K., Alim, M.A.: Numerical development of eco-friendly Cs2TiBr 6 based perovskite solar cell with all-inorganic charge transport materials via SCAPS-1D. Optik 225, 165765 (2021)
Akram, M., Siddique, S.A., Iqbal, J., Hussain, R., Mehboob, M.Y., Siddique, M.B.A., Naveed, S., Ali, B., Hanif, A., Sajid, M.: End-capped engineering of bipolar diketopyrrolopyrrole based small electron acceptor molecules for high performance organic solar cells. Comput. Theor. Chem. 1201, 113242 (2021)
Ansari-Rad, M., Abdi, Y., Arzi, E.: Reaction order and ideality factor in dye-sensitized nanocrystalline solar cells: a theoretical investigation. J. Phys. Chem. c. 116, 10867–10872 (2012)
Bouich, A., Mari, B., Atourki, L., Ullah, S., Touhami, M.E.: Shedding light on the effect of diethyl ether antisolvent on the growth of (CH3NH3) PbI3 thin films. JOM 73(2), 551–557 (2021)
Bouich, A., Ullah, S., Marí, B., Atourki, L., Touhami, M.E.: One-step synthesis of FA1-xGAxPbI3 perovskites thin film with enhanced stability of alpha (α) phase. Mater. Chem. Phys. 258, 123973 (2021)
Chang, X., Fang, J., Fan, Y., Luo, T., Su, H., Zhang, Y., Lu, J., Tsetseris, L., Anthopoulos, T.D., Liu, S.: Printable CsPbI3 perovskite solar cells with PCE of 19% via an additive strategy. Adv. Mater. 32, 2001243 (2020)
Chen, Z., Wang, J.J., Ren, Y., Yu, C., Shum, K.: Schottky solar cells based on CsSnI3 thin-films. Appl. Phys. Lett. 101, 93901 (2012)
Chen, K., Zhong, Q., Chen, W., Sang, B., Wang, Y., Yang, T., Liu, Y., Zhang, Y., Zhang, H.: Short-chain ligand-passivated stable α-CsPbI3 quantum dot for all-inorganic perovskite solar cells. Adv. Funct. Mater. 29, 1900991 (2019)
Chen, K., Jin, W., Zhang, Y., Yang, T., Reiss, P., Zhong, Q., Bach, U., Li, Q., Wang, Y., Zhang, H.: High efficiency mesoscopic solar cells using CsPbI3 perovskite quantum dots enabled by chemical interface engineering. J. Am. Chem. Soc. 142, 3775–3783 (2020)
Eperon, G.E., Stranks, S.D., Menelaou, C., Johnston, M.B., Herz, L.M., Snaith, H.J.: Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells. Energy Environ. Sci. 7, 982–988 (2014)
Eperon, G.E., Paternò, G.M., Sutton, R.J., Zampetti, A., Haghighirad, A.A., Cacialli, F., Snaith, H.J.: Inorganic caesium lead iodide perovskite solar cells. J. Mater. Chem. a. 3, 19688–19695 (2015)
Gao, L.-K., Tang, Y.-L., Diao, X.-F.: Theoretical study on photoelectric properties of FAPbI3 doped with Ge. Mater. Res. Express. 7, 116201 (2020)
Gerling, L.G., Mahato, S., Morales-Vilches, A., Masmitja, G., Ortega, P., Voz, C., Alcubilla, R., Puigdollers, J.: Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells. Sol. Energy Mater. Sol. Cells. 145, 109–115 (2016)
Gonzalez-Vazquez, J.P., Oskam, G., Anta, J.A.: Origin of nonlinear recombination in dye-sensitized solar cells: interplay between charge transport and charge transfer. J. Phys. Chem. C. 116, 22687–22697 (2012)
Jarwal, D.K., Mishra, A.K., Kumar, A., Ratan, S., Singh, A.P., Kumar, C., Mukherjee, B., Jit, S.: Fabrication and TCAD simulation of TiO2 nanorods electron transport layer based perovskite solar cells. Superlattices Microstruct. 140, 106463 (2020)
Karthick, S., Velumani, S., Bouclé, J.: Experimental and SCAPS simulated formamidinium perovskite solar cells: a comparison of device performance. Sol. Energy. 205, 349–357 (2020)
Khadka, D.B., Shirai, Y., Yanagida, M., Ryan, J.W., Miyano, K.: Exploring the effects of interfacial carrier transport layers on device performance and optoelectronic properties of planar perovskite solar cells. J. Mater. Chem. c. 5, 8819–8827 (2017)
Kumar, M.H., Dharani, S., Leong, W.L., Boix, P.P., Prabhakar, R.R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M.: Lead-free halide perovskite solar cells with high photocurrents realized through vacancy modulation. Adv. Mater. 26, 7122–7127 (2014)
Lee, J., Seol, D., Cho, A., Park, N.: High-efficiency perovskite solar cells based on the black polymorph of HC (NH2) 2PbI3. Adv. Mater. 26, 4991–4998 (2014)
Lin, L., Jiang, L., Li, P., Xiong, H., Kang, Z., Fan, B., Qiu, Y.: Simulated development and optimized performance of CsPbI3 based all-inorganic perovskite solar cells. Sol. Energy. 198, 454–460 (2020)
Mehboob, M.Y., Khan, M.U., Hussain, R., Fatima, R., Irshad, Z., Adnan, M.: Designing of near-infrared sensitive asymmetric small molecular donors for high-efficiency organic solar cells. J. Theor. Comput. Chem. 19, 2050034 (2020)
Mehboob, M.Y., Adnan, M., Hussain, R., Irshad, Z.: Quantum chemical designing of banana-shaped acceptor materials with outstanding photovoltaic properties for high-performance non-fullerene organic solar cells. Synthetic Metals 277, 116800 (2021)
Mehboob, M.Y., Hussain, R., Irshad, Z., Adnan, M.: Designing of U-shaped acceptor molecules for indoor and outdoor organic solar cell applications. J. Phys. Org. Chem. 34(8), e4210 (2021)
Mehboob, M.Y., Hussain, R., Irshad, Z., Adnan, M.: Enhancement in the photovoltaic properties of hole transport materials by end-capped donor modifications for solar cell applications. Bull. Korean Chem. Soc. 42(4), 597–610 (2021)
Mehboob, M.Y., Hussain, R., Khan, M.U., Adnan, M., Ehsan, M.A., Rehman, A., Janjua, M.R.S.A.: Quantum chemical design of near-infrared sensitive fused ring electron acceptors containing selenophene as π-bridge for high-performance organic solar cells. J. Phys. Org. Chem 34(8), e4204 (2021)
Mehboob, M.Y., Khan, M.U., Hussain, R., Ayub, K., Sattar, A., Ahmad, M.K., Adnan, M.: Designing of benzodithiophene core-based small molecular acceptors for efficient non-fullerene organic solar cells. Spectrochimica Acta Part A: Mol. Biomol. Spectrosc. 244, 118873 (2021)
Mozafari, B., Shahhoseini, A.: Using molybdenum trioxide as a TCO layer to improve performance of CdTe/CdS Thin-film Solar Cell. Signal Process. Renew. Energy. 4, 57–65 (2020)
Ou, Q., Bao, X., Zhang, Y., Shao, H., Xing, G., Li, X., Shao, L., Bao, Q.: Band structure engineering in metal halide perovskite nanostructures for optoelectronic applications. Nano Mater. Sci. 1, 268–287 (2019)
Park, N.-G., Grätzel, M., Miyasaka, T., Zhu, K., Emery, K.: Towards stable and commercially available perovskite solar cells. Nat. Energy. 1, 1–8 (2016)
Sandberg, O.J., Sundqvist, A., Nyman, M., Österbacka, R.: Relating charge transport, contact properties, and recombination to open-circuit voltage in sandwich-type thin-film solar cells. Phys. Rev. Appl. 5, 44005 (2016)
Siddique, S.A., Siddique, M.B.A., Hussain, R., Liu, X., Mehboob, M.Y., Irshad, Z., Adnan, M.: Efficient tuning of triphenylamine-based donor materials for high-efficiency organic solar cells. Comput. Theor. Chem. 1191, 113045 (2020)
Snaith, H.J.: Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells. J. Phys. Chem. Lett. 4, 3623–3630 (2013)
Sundqvist, A., Sandberg, O.J., Nyman, M., Smått, J., Österbacka, R.: Origin of the S-Shaped JV curve and the Light-Soaking issue in inverted organic solar cells. Adv. Energy Mater. 6, 1502265 (2016)
Swarnkar, A., Marshall, A.R., Sanehira, E.M., Chernomordik, B.D., Moore, D.T., Christians, J.A., Luther, J.M.: Quantum dot–induced phase stabilization of α-CsPbI3 perovskite for high-efficiency photovoltaics. Science 354(6308), 92–95 (2016)
Targhi, F.F., Jalili, Y.S., Kanjouri, F.: MAPbI3 and FAPbI3 perovskites as solar cells: case study on structural, electrical and optical properties. Results Phys. 10, 616–627 (2018)
Tian, J., Xue, Q., Yao, Q., Li, N., Brabec, C.J., Yip, H.: Inorganic halide perovskite solar cells: progress and challenges. Adv. Energy Mater. 10, 2000183 (2020)
Verschraegen, J., Burgelman, M.: Numerical modeling of intra-band tunneling for heterojunction solar cells in SCAPS. Thin Solid Films 515, 6276–6279 (2007)
Wang, Y., Liu, X., Zhang, T., Wang, X., Kan, M., Shi, J., Zhao, Y.: The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant? Angew. Chemie. 131, 16844–16849 (2019)
Wheeler, S., Deledalle, F., Tokmoldin, N., Kirchartz, T., Nelson, J., Durrant, J.R.: Influence of surface recombination on charge-carrier kinetics in organic bulk heterojunction solar cells with nickel oxide interlayers. Phys. Rev. Appl. 4, 24020 (2015)
Würfel, P., Würfel, U.: Physics of solar cells: from basic principles to advanced concepts. John Wiley & Sons, London (2016)
Xiang, S., Fu, Z., Li, W., Wei, Y., Liu, J., Liu, H., Zhu, L., Zhang, R., Chen, H.: Highly air-stable carbon-based α-CsPbI3 perovskite solar cells with a broadened optical spectrum. ACS Energy Lett. 3, 1824–1831 (2018)
Xiang, S., Li, W., Wei, Y., Liu, J., Liu, H., Zhu, L., Chen, H.: Natrium doping pushes the efficiency of carbon-based CsPbI3 perovskite solar cells to 10.7%. Iscience 15, 156–164 (2019)
Yaghoobi, N.N., Di Carlo, A., Méndez, M., Palomares, E., Paci, B., Generosi, A.: Analysis of the efficiency losses in hybrid perovskite/PTAA solar cells with different molecular weights: morphology versus kinetics. ACS Appl. Energy Mater. 3, 6853–6859 (2020)
Zafar, F., Mehboob, M.Y., Hussain, R., Hussain, A., Hassan, T., Rashid, M., Shahi, M.N.: End-capped engineering of truxene core based acceptor materials for high performance organic solar cells: theoretical understanding and prediction. Opt. Quant. Electr. 53, 1–24 (2021)
Zatsepin, D.A., Boukhvalov, D.W., Zatsepin, A.F., Mikhaylov, A.N., Gerasimenko, N.N., Zaporozhan, O.A.: Effect of long-term storage on the electronic structure of semiconducting silicon wafers implanted by rhenium ions. J. Mater. Sci. 56, 2103–2112 (2021)
Acknowledgements
The authors would like to acknowledge the University of Maragheh for their support and contribution to this study.
Funding
There is no funding for this study.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Mehrabian, M., Norouzi Afshar, E. & Norouzzadeh, P. Numerical simulation of bilayer perovskite quantum dot solar cell with 18.55% efficiency. Opt Quant Electron 54, 439 (2022). https://doi.org/10.1007/s11082-022-03823-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11082-022-03823-4