Abstract
Fabrication and characterization of SPR based fiber optic sensor utilizing bi-layers of ITO-Ag is presented. Effects of thicknesses of ITO and Ag layers on the sensitivity of sensor are studied experimentally. Sensitivity ascends as the thickness of Ag layer is enhanced till 30 nm and it starts decreasing as the thickness of Ag layers is further increased beyond 30 nm. SPR sensor based on 40 nm thick ITO layer-30 nm thick Ag layer demonstrates highest sensitivity.
Similar content being viewed by others
References
Brewer, S.H., Franzen, S.: Calculation of the electronic and optical properties of indium tin oxide by density functional theory. Chem. Phys. 300, 285–293 (2004)
Franzen, S.: Surface plasmon polaritons and screened plasma absorption in indium tin oxide compared to silver and gold. J. Phys. Chem. C 112, 6027–6032 (2008)
Franzen, S., Rhodes, C., Cerruti, M., Gerber, R.W., Losego, M., Maria, J.P., Aspnes, D.E.: Plasmonic phenomena in indium tin oxide and ITO-Au hybrid films. Opt. Lett. 34, 2867–2869 (2009)
Gupta, B.D., Verma, R.K.: Surface plasmon resonance based fiber optic sensors: principle, probe designs and some applications. J. Sens. 2009, 979761 (2009)
Harris, R.D., Wilkinson, J.S.: Waveguide surface plasmon resonance sensors. Sens. Actuator B 29, 261–267 (1995)
Homola, J.: Optical fiber sensor based on surface plasmon excitation. Sens. Actuator B 29, 401–405 (1995)
Homola, J.: On the sensitivity of surface plasmon resonance sensors with spectral interrogation. Sens. Actuator B 41, 207–211 (1997)
Homola, J., Yee, S.S., Gauglitz, G.: Surface plasmon resonance sensors: review. Sens. Actuator B 54, 3–15 (1999)
Jorgenson, R.C., Yee, S.S.: A fiber optic chemical sensor based on surface plasmon resonance. Sens. Actuator B 12, 213–220 (1993)
Kretschmann, E.: Die Bestimmung optischer Konstanten von Metallen durch Anregung von Oberflachenplasmashwingungen. Zeits. Physik 241, 313–324 (1971)
Kretschmann, E., Reather, H.: Radiative decay of non-radiative surface plasmons excited by light. Zeits. Naturforschung 23, 2135–2136 (1968)
Liedberg, B., Nylander, C., Sundstrom, I.: Surface plasmon resonance for gas detection and biosensing. Sens. Actuator B 4, 299–304 (1983)
Lin, W.B., Jaffrezic-Renault, N., Gagnaire, A., Gagnaire, H.: The effects of polarization of the incident light-modeling and analysis of a SPR multimode optical fiber sensor. Sens. Actuator A 84, 198–204 (2000)
Mishra, A.K., Mishra, S.K.: Infrared SPR sensitivity enhancement using ITO/TiO2/silicon overlays. Europhys. Lett. 112, 10001 (2015)
Rhodes, C., Franzen, S., Maria, J.P., Losego, M., Leonard, D.N., Laughlin, B., Duscher, G., Weibel, S.: Surface plasmon resonance in conducting metal oxides. J. Appl. Phys. 100, 054905 (2006)
Rhodes, C., Cerruti, M., Efremenko, A., Losego, M., Aspnes, D.E., Maria, J.P., Franzen, S.: Dependence of plasmon polaritons on the thickness of indium tin oxide thin films. J. Appl. Phys. 103, 093108 (2008)
Shah, K., Sharma, N.K., Sajal, V.: Analysis of fiber optic SPR sensor utilizing platinum based nanocomposites. Opt. Quant. Electron. 50, 265 (2018)
Sharma, A.K., Gupta, B.D.: Absorption based fiber optic surface plasmon resonance sensor: a theoretical evaluation. Sens. Actuator B 100, 423–431 (2004)
Sharma, A.K., Gupta, B.D.: On the sensitivity and signal to noise ratio of a step-index fiber optic surface plasmon resonance sensor with bimetallic layers. Opt. Commun. 245, 159–169 (2005)
Sharma, A.K., Gupta, B.D.: On the performance of different bimetallic combinations in surface plasmon resonance based fiber optic sensors. J. Appl. Phys. 101, 093111 (2007)
Sharma, N.K., Rani, M., Sajal, V.: Surface plasmon resonance based fiber optic sensor with double resonance dips. Sens. Actuator B 188, 326–333 (2013)
Shukla, S., Sharma, N.K., Sajal, V.: Sensitivity enhancement of a surface plasmon resonance based fiber optic sensor using ZnO thin film: a theoretical study. Sens. Actuator B 206, 463–470 (2015)
Srivastava, S.K., Gupta, B.D.: Influence of ions on the surface plasmon resonance spectrum of a fiber optic refractive index sensor. Sens. Actuator B 156, 559–562 (2011)
Srivastava, S.K., Arora, V., Sapra, S., Gupta, B.D.: Localized surface plasmon resonance based fiber optic U-shaped biosensor for the detection of blood glucose. Plasmonics 7, 261–268 (2012)
Verma, R.K., Gupta, B.D.: Surface plasmon resonance based fiber optic sensor for the IR region using a conducting metal oxide film. JOSA A 27, 846–851 (2010)
Villar, I.D., Zamarreno, C.R., Hernaez, M., Arregui, F.J., Matias, I.R.: Lossy mode resonance generation with indium tin oxide coated optical fibers for sensing applications. J. Lightw. Technol. 28, 111–117 (2010)
Acknowledgements
This work is financially supported by Defence Research and Development Organization (DRDO), India through Project Number ERIP/ER/DG-ECS/990116205/M/01/1687. Navneet K. Sharma is also thankful to Satyendra K. Mishra for the motivation and support.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kapoor, V., Sharma, N.K. & Sajal, V. Indium tin oxide and silver based fiber optic SPR sensor: an experimental study. Opt Quant Electron 51, 125 (2019). https://doi.org/10.1007/s11082-019-1837-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11082-019-1837-5