Abstract
The dynamic modeling and simulation of spatial rigid-multibody systems with lubricated spherical joints is the main purpose of the present work. This issue is of paramount importance in the analysis and design of realistic multibody mechanical systems undergoing spatial motion. When the spherical clearance joint is modeled as dry contact; i.e., when there is no lubricant between the mechanical elements which constitute the joint, a body-to-body (typically metal-to-metal) contact takes place. The joint reaction forces in this case are evaluated through a Hertzian-based contact law. A hysteretic damping factor is included in the dry contact force model to account for the energy dissipation during the contact process. The presence of a fluid lubricant avoids the direct metal-to-metal contact. In this situation, the squeeze film action, due to the relative approaching motion between the mechanical joint elements, is considered utilizing the lubrication theory associated with the spherical bearings. In both cases, the intra-joint reaction forces are evaluated as functions of the geometrical, kinematical, and physical characteristics of the spherical joint. These forces are then incorporated into a standard formulation of the system’s governing equations of motion as generalized external forces. A spatial four bar mechanism that includes a spherical clearance joint is considered here as an example. The computational simulations are carried out with and without the fluid lubricant, and the results are compared with those obtained when the system is modeled with perfect joints only. From the general results, it is observed that the system’s performance with lubricant effect presents fewer peaks in the kinematic and dynamic outputs, when compared with those from the dry contact joint model.
Similar content being viewed by others
References
Flores, P., Ambrósio, J., Claro, J.C.P., Lankarani, H.M.: Kinematics and dynamics of multibody systems with imperfect joints: models and case studies. In: Lecture Notes in Applied and Computational Mechanics, vol. 34. Springer, Berlin, Heidelberg, New York (2008)
Crowthera, A.R., Singha, R., Zhangb, N., Chapman, C.: Impulsive response of an automatic transmission system with multiple clearances: formulation, simulation and experiment. J. Sound Vib. 306, 444–466 (2007)
Erkaya, S., Uzmay, I.: A neural-genetic (NN–GA) approach for optimising mechanisms having joints with clearance. Multibody Syst. Dyn. 20(1), 69–83 (2008)
Ishida, Y., Inagaki, M., Ejima, R., Hayashi, A.: Nonlinear resonances and self-excited oscillations of a rotor caused by radial clearance and collision. Nonlinear Dyn. (2009). doi:10.1007/s11071-009-9482-3
Erkaya, S., Uzmay, I.: Investigation on effect of joint clearance on dynamics of four-bar mechanism. Nonlinear Dyn. (2009). doi:10.1007/s11071-009-9470-7
Duarte, F.B., Tenreiro, J.: Describing function of two masses with backlash. Nonlinear Dyn. 56(4), 409–413 (2009)
Park, J., Nikravesh, P.E.: Effect of steering-housing rubber bushings on the handling of a vehicle. SAE Paper 970103, SAE, Warrendale, Pennsylvania (1997)
Ambrósio, J., Veríssimo, P.: Sensitivity of a vehicle ride to the suspension bushing characteristics. J. Mech. Sci. Technol. 23, 1075–1082 (2009)
Smith, S.L., Dowson, D., Goldsmith, A.A.J.: The effect of diametral clearance, motion and loading cycles upon lubrication of metal-to-metal total hip replacements. Proc. Inst. Mech. Eng. J. Mech. Eng. Sci. 215, 1–5 (2001)
Dowson, D., Hardaker, C., Flett, M., Isaac, G.H.: A hip joint simulator study of the performance of metal-on-metal joints: Part I: The role of materials. J. Arthr. 19(8), 118–123 (2004)
Fialho, J.C., Fernandes, P.R., Eça, L., Folgado, J.: Computational hip joint simulator for wear and heat generation. J. Biomech. 40, 2358–2366 (2007)
Dubowsky, S., Freudenstein, F.: Dynamic analysis of mechanical systems with clearances. Part 1: formulation of dynamic model. J. Eng. Ind. 93(1), 305–309 (1971)
Dubowsky, S.: On predicting the dynamic effects of clearances in one-dimensional closed loop systems. J. Eng. Ind. 96(1), 324–329 (1974)
Earles, S.W.E., Wu, C.L.S.: Motion analysis of a rigid link mechanism with clearance at a bearing using Lagrangian mechanics and digital computation. Mechanisms, pp. 83–89 (1973)
Grant, S.J., Fawcett, J.N.: Effects of clearance at the coupler-rocker bearing of a 4-bar linkage. Mech. Mach. Theory 14, 99–110 (1979)
Haines, R.S.: Survey: 2-dimensional motion and impact at revolute joints. Mech. Mach. Theory 15, 361–370 (1980)
Towsend, M.A., Mansour, W.M.: A pendulating model for mechanisms with clearances in the revolutes. J. Eng. Ind. 97(2), 354–358 (1975)
Miedema, B., Mansour, W.M.: Mechanical joints with clearance: a three mode model. J. Eng. Ind. 98(4), 1319–1323 (1976)
Haines, R.S.: A theory of contact loss at resolute joints with clearance. Proc. Inst. Mech. Eng. J. Mech. Eng. Sci. 22(3), 129–136 (1980)
Bengisu, M.T., Hidayetoglu, T., Akay, A.: A theoretical and experimental investigation of contact loss in the clearances of a four-bar mechanism. J. Mech. Transm. Autom. Des. 108, 237–244 (1986)
Feng, B., Morita, N., Torii, T.: A new optimization method for dynamic design of planar linkage with clearances at joints—optimizing the mass distribution of links to reduce the change of joint forces. J. Mech. Des. 124, 68–73 (2002)
Orden, J.C.G.: Analysis of joint clearances in multibody systems. Multibody Syst. Dyn. 13(4), 401–420 (2005)
Winfrey, R.C., Anderson, R.V., Gnilka, C.W.: Analysis of elastic machinery with clearances. J. Eng. Ind. 95, 695–703 (1973)
Dubowsky, S., Gu, P.Y., Deck, J.F.: The dynamic analysis of flexibility in mobile robotic manipulator systems. In: Proceedings of VIII World Congress on the Theory of Machines and Mechanisms, Prague, Czechoslovakia, August 26–31, p. 12 (1991)
Bauchau, O.A., Rodriguez, J.: Modelling of joints with clearance in flexible multibody systems. Int. J. Solids Struct. 39, 41–63 (2002)
Dubowsky, S., Moening, M.F.: An experimental and analytical study of impact forces in elastic mechanical systems with clearances. Mech. Mach. Theory 13, 451–465 (1978)
Kakizaki, T., Deck, J.F., Dubowsky, S.: Modeling the spatial dynamics of robotic manipulators with flexible links and joint clearances. J. Mech. Des. 115, 839–847 (1993)
Liu, C., Zhang, K., Yang, L.: Normal force-displacement relationship of spherical joints with clearances. J. Comput. Nonlinear Dyn. 1(2), 160–167 (2006)
Flores, P., Ambrósio, J., Claro, J.C.P., Lankarani, H.M.: Dynamics of multibody systems with spherical clearance joints. J. Comput. Nonlinear Dyn. 1(3), 240–247 (2006)
Nikravesh, P.E.: Computer Aided Analysis of Mechanical Systems. Prentice Hall, Englewood Cliffs (1988)
Shabana, A.A.: Dynamics of Multibody Systems. Wiley, New York (1989)
Baumgarte, J.: Stabilization of constraints and integrals of motion in dynamical systems. Computer Methods Appl. Mech. Eng. 1, 1–16 (1972)
Flores, P., Seabra, E.: Influence of the Baumgarte parameters on the dynamics response of multibody mechanical systems. Dyn. Contin. Discrete Impuls. Syst., Ser. B: Appl. Algorithms 16(3), 415–432 (2009)
Nikravesh, P.E.: Initial condition correction in multibody dynamics. Multibody Syst. Dyn. 18, 107–115 (2007)
Gear, C.W.: Numerical Initial Value Problems in Ordinary Differential Equations. Prentice Hall, Englewood Cliffs (1971)
Shampine, L., Gordon, M.: Computer Solution of Ordinary Differential Equations: The Initial Value Problem. Freeman, New York (1972)
Flores, P., Ambrósio, J., Claro, J.C.P., Lankarani, H.M., Koshy, C.S.: A study on dynamics of mechanical systems including joints with clearance and lubrication. Mech. Mach. Theory 41(3), 247–261 (2006)
Ahmed, S., Lankarani, H.M., Pereira, M.F.O.S.: Frictional impact analysis in open loop multibody mechanical system. J. Mech. Des. 121, 119–127 (1999)
Hertz, H.: On the contact of solids—on the contact of rigid elastic solids and on hardness. In: Miscellaneous Papers, pp. 146–183. Macmillan and Co. Ltd., London (1896) (trans.: Jones, D.E., Schott, G.A.)
Goldsmith, W.: Impact—the Theory and Physical Behaviour of Colliding Solids. Edward Arnold, Sevenoaks (1960)
Lankarani, H.M., Nikravesh, P.E.: A contact force model with hysteresis damping for impact analysis of multibody systems. J. Mech. Des. 112, 369–376 (1990)
Lankarani, H.M., Nikravesh, P.E.: Continuous contact force models for impact analysis in multibody systems. Nonlinear Dyn. 5, 193–207 (1994)
Boker, J.F.: Dynamically loaded journal bearings: mobility method of solution. J. Basic Eng. 537–546 (1965)
Goenka, P.K.: Effect of surface ellipticity on dynamically loaded spherical and cylindrical joints and bearings. Ph.D. Dissertation, Cornell University, Ithaca, New York (1980)
Goenka, P.K.: Dynamically loaded journal bearings: finite element method analysis. ASME J. Tribol. 106, 429–439 (1984)
Hamrock, B.J.: Fundamentals of Fluid Film Lubrication. McGraw Hill, New York (1994)
Frêne, J., Nicolas, D., Degneurce, B., Berthe, D., Godet, M.: Hydrodynamic Lubrication—Bearings and Thrust Bearings. Elsevier, Amsterdam (1997)
Hirani, H., Athre, K., Biswas, S.: Rapid and globally convergent method for dynamically loaded journal bearing design. Proc. Inst. Mech. Eng., Part J, Eng. Tribol. 212(3), 207–214 (1998)
Hlavácek, M.: Squeeze-film lubrication of the human ankle joint subjected to the cyclic loading encountered in walking. J. Tribol. 127, 141–148 (2005)
Wang, F., Jin, Z.: Transient elastohydrodynamic lubrication of hip joint implants. J. Tribol. 130, 011007-11 (2008)
Pinkus, O., Sternlicht, S.A.: Theory of Hydrodynamic Lubrication. McGraw Hill, New York (1961)
Haug, E.J.: Computer-Aided Kinematics and Dynamics of Mechanical Systems. Basic Methods, vol. I. Allyn and Bacon, Needham Heights (1989)
Flores, P.: Dynamic analysis of mechanical systems with imperfect kinematic joints. Ph.D. Dissertation, University of Minho, Guimarães, Portugal (2005)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Flores, P., Lankarani, H.M. Spatial rigid-multibody systems with lubricated spherical clearance joints: modeling and simulation. Nonlinear Dyn 60, 99–114 (2010). https://doi.org/10.1007/s11071-009-9583-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11071-009-9583-z