Avoid common mistakes on your manuscript.
Erratum to: J Nanopart Res16:2195 (2014)
DOI 10.1007/s11051-013-2195-z
The original version of this article unfortunately contained two mistakes. There were discrepancies in Fig. 3 and Table 5 that have to be corrected as follows: (a) The “BCF > 50” which appear in Fig. 3 on page 9 has replaced with “BMF > 0.1”; (b) The red and yellow dot inserted in Table 5 for the environmental exposure potential and human health aspects of “Carbon nanotubes used to stiffen Babolat_ NSTM Tour TennisRacket” has been replaced with a gray and red dot, respectively.
The following shows the corrected Fig. 3
The following shows the corrected Table 5.
The authors apologize to readers for these errors.
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found at http://dx.doi.org/10.1007/s11051-013-2195-z
Rights and permissions
About this article
Cite this article
Hansen, S.F., Jensen, K.A. & Baun, A. Erratum to: NanoRiskCat: a conceptual tool for categorization and communication of exposure potentials and hazards of nanomaterials in consumer products. J Nanopart Res 19, 236 (2017). https://doi.org/10.1007/s11051-017-3909-4
Published:
DOI: https://doi.org/10.1007/s11051-017-3909-4