A bimetallic reactor vessel material (steel 15Kh2MFA with austenitic cladding) is studied. The residual stresses arising in the bimetal after heat treatment are determined with the help of x-ray diffraction, acoustic and computer control techniques. The causes of the appearance of plastic strain in the specimens are assessed and the deflections and the residual stresses after quenching and annealing are determined.
Similar content being viewed by others
References
Ya. I. Shtrombakh, Yu. A. Nikolaev, and P. A. Platonov, “Radiation endurance of the metal of VVER reactor vessels,” Atom. Energ., 98(6), 460 – 472 (2005).
A. V. Nikolaev, Yu. A. Nikolaev, and Yu. R. Kevorkyan, “Radiation embrittlement of materials of VVER-1000 vessels,” Atom. Energ. , 90(5), 271 – 276 (2001).
F. M. Mitenkov, V. B. Kaidalov, Yu. G. Korotkikh, et al., Methods for Assessment of the Service Life of Nuclear Power Plants [in Russian], Mashinostroenie, Moscow (2007), 445 p.
V. V. Abramov, Residual Stresses and Strains in Metals [in Russian], Mashinostroenie, Moscow (1985), 258 p.
A. A. Khlybov, “Effect of heat treatment on residual stresses in fusion zone of austenitic and vessel steels,” Metalloved. Term. Obrab. Met., No. 7, 47 – 51 (2016).
Ya. S. Umanskii, Yu. A. Skakov, A. N. Ivanov, and L. N. Rastorguev, Crystallography, X-ray Diffractometry and Electron Microscopy [in Russian], Metallurgiya, Moscow (2012), 632 p.
V. V. Trofimov, A. Ya. Bashkarev, and J. Kraus, “X-ray strain measurement – a simple technique,” V Mire Nerazrush. Kontr., No. 1, 28 – 33 (2005).
A. A. Khlybov, V. G. Vasil’ev, and A. L. Uglov, “Determination of physico-mechanical characteristics of specimens subjected to irradiation,” Zavod. Lab., Diagn. Mater., 73(12), 46 – 49 (2009).
V. V. Klyuev (ed.), Nondestructive Inspection, A Reference Book [in Russian], Mashinostroenie, Moscow (2004), Vol. 3, 864 p.
N. P. Aleshin, A. L. Uglov, A. A. Khlybov, and M. A. Prilutskii, “An acoustic method of determining axial stresses for an arbitrary part of a pipeline,” Zavod. Lab., Diagn. Mater., No. 3, 14 – 19 (2008).
Javadi Yashar, Ahmadi Najiafabadi Mehdi, and Akhlaghi Mehdi, “Residual stress evaluation in dissimilar welded joints using finite element simulation and the I cr ultrasonic wave,” Defectoskopiya, No. 9, 48 – 61 (2012).
A. A. Khlybov, “Assessment of the stress state of guillotine knives subjected to heat treatment,” Zavod. Lab., Diagn. Mater., 75(4), 54 – 57 (2009).
A. A. Khlybov and L. A. Oshurina, “Comparative analysis of determination of residual stresses in steel 6KhS by acoustic and x-ray methods,” Privolzh. Nauch. Zh., No. 2, 16 – 21 (2010).
Ya. M. Klebanov, A. N. Davydov, and V. L. Papirovskii, Use of ANSYS Software in Training Process [in Russian], Samara State Technical University, Samara (cadfem.ru).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 45 – 50, February, 2019.
Rights and permissions
About this article
Cite this article
Khlybov, A.A., Ryabov, D.A. Assessment of Residual Stresses in Specimens of Ferritic-Pearlitic Steel with Austenitic Cladding. Met Sci Heat Treat 61, 114–119 (2019). https://doi.org/10.1007/s11041-019-00385-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-019-00385-3