Abstract
An analysis of the development of aluminum alloys in the 20th century is made on the basis of the author’s works in almost 40 years. It is inferred that advances in high-strength and high-temperature aluminum alloys will occur in the 21st century primarily by introducing transition and rare-earth metals into their composition.
Similar content being viewed by others
References
V. I. Dobatkin, V. I. Elagin, and G. A. Mudrenko, in: Processes of Treatment of Light and High-Temperature Alloys [in Russian], Nauka, Moscow (1981), pp. 82–90.
S. M. Voronov and V. I. Elagin, Trudy MATI [in Russian], Issue 23, Oborongiz, Moscow (1954), pp. 68–85.
S. M. Voronov and V. I. Elagin, Trudy MATI [in Russian], Issue 34, Oborongiz, Moscow (1954), pp. 5–157.
V. I. Elagin, in: Physical Metallurgy of Alloys of Light Metals [in Russian], Nauka, Moscow (1970), pp. 51–59.
V. I. Elagin, Alloying of Deformable Aluminum Alloys with Transition Metals [in Russian], Metallurgiya, Moscow (1975).
V. I. Elagin, Tekhnol. Legk. Splavov, No. 3, 6–29 (2004).
F. I. Kvasov and I. N. Fridlyander, Aluminum Alloys of the Duralumin Type [in Russian], Metallurgiya, Moscow (1984).
S. M. Voronov, Processes of Strengthening of Aluminum-Magnesium-Silicon Alloys and Their New Commercial Compositions [in Russian], Oborongiz, Moscow (1946).
H. Unkel, Metallwirtschaft, 19(3), 37 (1940).
V. I. Dobatkin, in: Research of Alloys of Nonferrous Metals [in Russian], Issue 3, Izd. Akad. Nauk SSSR, Moscow (1962), pp. 19–25.
V. I. Dobatkin, Tekhnol. Legk. Splavov, No. 5, 70–73 (1967).
V. I. Elagin, in: Physical Metallurgy of Light Alloys [in Russian], Nauka, Moscow (1965), pp. 60–66.
V. I. Elagin and N. N. Averkina, Tekhnol. Legk. Splavov, No. 5, 73–78 (1967).
V. I. Elagin, V. V. Zakharov, and T. D. Rostova, Tsvetn. Met., No. 12, 96–99 (1982).
M. E. Drits, L. S. Toropova, Yu. G. Bykov, et al., in: Metallurgy and Metal Science of Nonferrous Metals [in Russian], Nauka, Moscow (1982), pp. 213–223.
V. I. Elagin, V. V. Zakharov, A. A. Petrova, and E. V. Vyshegorodtseva, Izv. Akad. Nauk SSSR, Metally, No. 4, 180–183 (1983).
V. I. Elagin, V. V. Zakharov, S. G. Pavlenko, and T. D. Rostova, Fiz. Met. Metalloved., 60(1), 97–100 (1985).
Yu. A. Filatov, Metalloved. Term. Obrab. Met., No. 6, 33–36 (1996).
V. I. Elagin, Metalloved. Term. Obrab. Met., No. 9, 10–19 (2002).
V. I. Dobatkin and V. I. Elagin, Granulated Aluminum Alloys [in Russian], Metallurgiya, Moscow (1981).
V. I. Dobakin, V. I. Elagin, and V. M. Fedorov, Rapidly Crystallized Aluminum Alloys [in Russian], VILS, Moscow (1995).
V. I. Elagin and V. M. Fedorov, Izv. Akad. Nauk SSSR, Metally, No. 5, 239–245 (1977).
V. I. Elagin, Tekhnol. Legk. Splavov, No. 1, 7–23 (1998).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 3–11, September, 2007.
Rights and permissions
About this article
Cite this article
Elagin, V.I. Ways of developing high-strength and high-temperature structural aluminum alloys in the 21st century. Met Sci Heat Treat 49, 427–434 (2007). https://doi.org/10.1007/s11041-007-0081-y
Issue Date:
DOI: https://doi.org/10.1007/s11041-007-0081-y