A numerical method of calculating the spectral-ratio temperature for objects whose spectral emissive power ελ depends on the wavelength λ is described. A calculation is carried out for two types of broadband radiation receivers based on Si/Si and Si/InGaAs structures. The differences between the actual temperature of the objects and their spectral-ratio temperature are given for Fe, Ni, Cu, Ag, and Co as examples. It is shown that there are no disagreements between the results of numerical and analytical calculations of the spectral-ratio temperature.
Similar content being viewed by others
References
M. A. Bramson, Reference Tables on the Infra-Red Radiation of Heated Bodies. Vol. 1 [Russian translation], Nauka, Moscow (1964).
A. E. Sheindlin (ed.), Emissive Properties of Solids. A Reference Book [in Russian], Energiya, Moscow (1974).
F. Lineweg, Temperature Measurement in Technology. A Reference Book [Russian translation], Metallurgiya, Moscow (1980).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No. 6, pp. 39–41, June, 2010.
Rights and permissions
About this article
Cite this article
Frunze, A.V. A numerical method of determining the spectral-ratio temperature. Meas Tech 53, 664–667 (2010). https://doi.org/10.1007/s11018-010-9558-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-010-9558-y