The results of roller briquetting of coke breeze with different binders (liquid glass and lime) are presented. The dependence of the density and drop strength of a briquette on the precompaction pressure in the deformation zone is established. The nonuniformity of the density distribution over the briquette cross-section is determined.
Similar content being viewed by others
References
M. A. Diez, R. Alvarez, and J. L. G. Cimadevilla, “Briquetting of carbon-containing wastes from steelmaking for metallurgical coke production,” Fuel, 114, 216–223 (2013).
Yu. N. Loginov, N. A. Babailov, and S. P. Burkin, “Bulk deformation in roller briquetting of metallurgical waste,” Metally, No. 1, 48–52 (2000).
S. P. Burkin, N. A. Babailov, Yu. N. Loginov, and A. A. Shchipanov, “Optimal arrangement of the cells on the rollers of a briquetting press,” Stal, No. 5, 68–70 (1997).
Yu. N. Loginov, S. P. Burkin, and N. A. Babailov, “Effect of the roller shape on the boundary conditions and densification during roller briquetting,” Stal, No. 9, 87–90 (2000).
T. Shigehisa, T. Nakagawa, and S. Yamamoto, “Briquetting of UBC by double roll press. P. I: The application and limitations of the Johanson model,” Powder Technol., 264, 608–613 (2014).
Yu. N. Loginov, “Effect of the gas phase on briquetting processes,” Stal, No. 8, 80–82 (2000).
P. Guigon and O. Simon, “Roll press design–influence of force feed systems on compaction,” Powder Technol., 130, 41–48 (2003).
L. I. Polyanskii, N. A. Babailov, and Yu. N. Loginov, “Density distribution along the length of a briquette produced by roller briquetting,” Innov. Nauka, 2, No. 5, 128–131 (2015).
N. A. Babailov, L. I. Polyanskii, and Yu. N. Loginov, “Briquetting metallurgical lime screenings and parameters making it possible to improve process efficiency,” Metallurg, No. 6, 32–35 (2016).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 10, pp. 22–24, October, 2017.
Rights and permissions
About this article
Cite this article
Loginov, Y.N., Babailov, N.A. & Polyanskii, L.I. Effect of the Precompaction Pressure on the Density Distribution in a Metallurgical Briquette During Roller Pressing. Metallurgist 61, 849–852 (2018). https://doi.org/10.1007/s11015-018-0574-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-018-0574-5