Information is presented on the development of a new technology for the production of small-diameter grinding balls that have class-III and class-IV hardness ratings and are made from continuous-cast carbon steel semifinished products with a small cross section. Recommendations are given on the chemical composition of the high-carbon steel, which has superior hardenability. The regimes established for the rolling and heat-treatment operations have made it possible to produce class-III and class-IV-hardnessrated 40-mm-diam. grinding balls and class-III-hardness-rated 60-mm-diam. grinding balls since the successful introduction of the ShPS 30-80 ball-rolling mill. The balls meet the requirements of the standards GOST 7524–89 and DSTU 3499–97.
Similar content being viewed by others
References
S. B. Andreev, V. V. Zverichev, and V. A. Perov, Crushing, Grinding, and Screening, Nedra, Moscow (1986).
V. Yu. Kulak, V. A. Biller, M. A. Vasilenko, et al., “Construction of a ball-rolling mill at the Donetsk Metal-Rolling Plant,” Metallurg. Gornorud. Prom., No. 5, 36–39 (2014).
A. A. Minaev, A. N. Lubenets, E. N. Smirnov, et al., “Highly efficient flow schemes and integration – the foundation for improving the quality of rolled products for critical applications,” Metall i Lit’e Ukrainy, No. 7/8, 35–37 (2002).
A. I. Serov, “Construction and development of an electrometallurgical complex at the OOO Elektrostal (Kurakhovo, Ukraine),” Metall i Lit’e Ukrainy, No. 9/10, 10–14 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 4, 87–91, April, 2016.
Rights and permissions
About this article
Cite this article
Lam, M.M., Serov, A.I., Smirnov, E.N. et al. Mastering the Production of 40- and 60-mm-Diam. Grinding Balls in Hardness Classes III and IV at the Donetsk Metal-Rolling Plant. Metallurgist 60, 440–446 (2016). https://doi.org/10.1007/s11015-016-0311-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-016-0311-x