Abstract
Simple formulas for calculating equivalent von Mises stress and von Mises effective plastic strain in an elastic–plastic ordinary peridynamic analysis are proposed. The equivalent von Mises stress is calculated by equating the deviatoric part of strain energy obtained from classical continuum mechanics and peridynamics. The effective plastic strain is proposed so that it reduced to uniaxial plastic strain in uniaxial tension test. Two example problems of the plate with a hole and a central crack under tension are considered to verify the validity of the proposed formulas. The plots of von Mises stress, equivalent plastic strain, plastic zone area and horizontal and vertical displacements are extracted and compared with the results obtain from the finite element analysis. The results show the good accuracy of the peridynamics in predicting the above mentioned parameters as well as the validity of the suggested formulas in predicting von Mises stress and equivalent plastic strain.
Similar content being viewed by others
References
Jiang X-W, Wang H (2018) Ordinary state-based peridynamics for open-hole tensile strength prediction of fiber-reinforced composite laminates. J Mech Mater Struct 13:53–82
Zhou W, Liu D, Liu N (2017) Analyzing dynamic fracture process in fiber-reinforced composite materials with a peridynamic model. Eng Fract Mech 178:60–76
Yaghoobi A, Chorzepa MG (2017) Fracture analysis of fiber reinforced concrete structures in the micropolar peridynamic analysis framework. Eng Fract Mech 169:238–250
Hu Y, Madenci E, Phan N (2017) Peridynamics for predicting damage and its growth in composites. Fatigue Fract Eng Mater Struct 40:1214–1226
Sun C, Huang Z (2016) Peridynamic simulation to impacting damage in composite laminate. Compos Struct 138:335–341
Oterkus E, Madenci E (2012) Peridynamic analysis of fiber-reinforced composite materials. J Mech Mater Struct 7:45–84
Hu W, Ha YD, Bobaru F (2012) Peridynamic model for dynamic fracture in unidirectional fiber-reinforced composites. Comput Methods Appl Mech Eng 217–220:247–261
Chen Z, Bobaru F (2015) Peridynamic modeling of pitting corrosion damage. J Mech Phys Solids 78:352–381
Ren B, Wu CT, Askari E (2017) A 3D discontinuous Galerkin finite element method with the bond-based peridynamics model for dynamic brittle failure analysis. Int J Impact Eng 99:14–25
Zhou X, Wang Y, Qian Q (2016) Numerical simulation of crack curving and branching in brittle materials under dynamic loads using the extended non-ordinary state-based peridynamics. Eur J Mech A Solids 60:277–299
Cheng Z, Zhang G, Wang Y, Bobaru F (2015) A peridynamic model for dynamic fracture in functionally graded materials. Compos Struct 133:529–546
Hafezi MH, Alebrahim R, Kundu T (2017) Peri-ultrasound for modeling linear and nonlinear ultrasonic response. Ultrasonics 80:47–57
Tao Y, Tian X, Du Q (2017) Nonlocal diffusion and peridynamic models with Neumann type constraints and their numerical approximations. Appl Math Comput 305:282–298
Silling SA (2000) Reformulation of elasticity theory for discontinuities and long-range forces. J Mech Phys Solids 48:175–209
Silling SA, Epton M, Weckner O, Xu J, Askari E (2007) Peridynamic states and constitutive modeling. J Elast 88:151–184
Gu X, Madenci E, Zhang Q (2018) Revisit of non-ordinary state-based peridynamics. Eng Fract Mech 190:31–52
Ballarini R, Diana V, Biolzi L, Casolo S (2018) Bond-based peridynamic modelling of singular and nonsingular crack-tip fields. Meccanica 53:3495–3515
Tupek MR, Radovitzky R (2014) An extended constitutive correspondence formulation of peridynamics based on nonlinear bond-strain measures. J Mech Phys Solids 65:82–92
Macek RW, Silling SA (2007) Peridynamics via finite element analysis. Finite Elem Anal Des 43:1169–1178
Ladányi G, Jenei I (2008) Analysis of plastic peridynamic material with RBF meshless method. Pollack Periodica 3:65–77
Celik E, Guven I, Madenci E (2011) Simulations of nanowire bend tests for extracting mechanical properties. Theoret Appl Fract Mech 55:185–191
Guven I, Zelinski BJ (2015) Peridynamic modeling of damage and fracture in EM windows and domes. In: SPIE defense + security, SPIE, 2015, p 10
Oterkus E, Diyaroglu C, Zhu N, Oterkus S, Madenci E (2015) Utilization of peridynamic theory for modeling at the nano-scale. In: Baillin X, Joachim C, Poupon G (eds) Nanopackaging: from nanomaterials to the atomic scale. Advances in atom and single molecule machines. Springer, Cham, pp 1–16
Ahadi A, Hansson P, Melin S (2016) Indentation of thin copper film using molecular dynamics and peridynamics. Proc Struct Integr 2:1343–1350
Lee J, Liu W, Hong J-W (2016) Impact fracture analysis enhanced by contact of peridynamic and finite element formulations. Int J Impact Eng 87:108–119
Yolum U, Taştan A, Güler MA (2016) A peridynamic model for ductile fracture of moderately thick plates. Proc Struct Integr 2:3713–3720
Warren TL, Silling SA, Askari A, Weckner O, Epton MA, Xu J (2009) A non-ordinary state-based peridynamic method to model solid material deformation and fracture. Int J Solids Struct 46:1186–1195
Foster JT, Silling SA, Chen WW (2010) Viscoplasticity using peridynamics. Int J Numer Meth Eng 81:1242–1258
Littlewood DJ (2010) Simulation of dynamic fracture using peridynamics, finite element modeling, and contact. In: ASME 2010 international mechanical engineering congress and exposition, American Society of Mechanical Engineers, pp 209–217
Littlewood DJ (2011) A nonlocal approach to modeling crack nucleation in AA 7075-T651. In: ASME 2011 international mechanical engineering congress and exposition, American Society of Mechanical Engineers, pp 567–576
Tupek MR, Rimoli JJ, Radovitzky R (2013) An approach for incorporating classical continuum damage models in state-based peridynamics. Comput Methods Appl Mech Eng 263:20–26
O’Grady J, Foster J (2014) Peridynamic beams: a non-ordinary, state-based model. Int J Solids Struct 51:3177–3183
Sun S, Sundararaghavana V (2014) A peridynamic implementation of crystal plasticity. Int J Solids Struct 51:3350–3360
Amani J, Oterkus E, Areias P, Zi G, Nguyen-Thoi T, Rabczuk T (2016) A non-ordinary state-based peridynamics formulation for thermoplastic fracture. Int J Impact Eng 87:83–94
Lai X, Liu LS, Liu QW, Cao DF, Wang Z, Zhai PC (2015) Slope stability analysis by peridynamic theory. Appl Mech Mater 744–746:584–588
Wu CT, Ren B (2015) A stabilized non-ordinary state-based peridynamics for the nonlocal ductile material failure analysis in metal machining process. Comput Methods Appl Mech Eng 291:197–215
Yu Y, Liu S-S, Zhao S-L, Yu Z (2016) The nonlinear inplane behavior and progressive damage modeling for laminate by peridynamics. In: ASME 2016 international mechanical engineering congress and exposition, American Society of Mechanical Engineers, p V001T003A054
Rahaman MM, Roy P, Roy D, Reddy JN (2017) A peridynamic model for plasticity: micro-inertia based flow rule, entropy equivalence and localization residuals. Comput Methods Appl Mech Eng 327:369–391
Sami A (2017) Peridynamic analysis of residual stress around a cold expanded fastener hole. Int J Appl Innov Eng Manage 6:1–7
Lai X, Liu L, Li S, Zeleke M, Liu Q, Wang Z (2018) A non-ordinary state-based peridynamics modeling of fractures in quasi-brittle materials. Int J Impact Eng 111:130–146
Mitchell JA (2011) A nonlocal, ordinary, state-based plasticity model for peridynamics. Sandia Report SAND2011-3166, Sandia National Laboratories, Albuquerque
Lammi CJ, Vogler TJ (2014) A Nonlocal peridynamic plasticity model for the dynamic flow and fracture of concrete. Sandia National Laboratories (SNL-CA), Livermore, CA (United States)
Madenci E, Oterkus S (2016) Ordinary state-based peridynamics for plastic deformation according to von Mises yield criteria with isotropic hardening. J Mech Phys Solids 86:192–219
Silling SA (2016) Introduction to peridynamics. In: Bobaru F, Foster JT, Geubelle PH, Silling SA (eds) Handbook of peridynamic modeling. Chapman and Hall/CRC, Boca Raton, pp 63–98
Chen W, Zhu F, Zhao J, Li S, Wang G (2018) Peridynamics-based fracture animation for elastoplastic solids. Comput Graph Forum 37:112–124
Madenci E, Oterkus E (2013) Peridynamic theory and its applications. Springer, New York
Zhou XP, Shou YD, Berto F (2018) Analysis of the plastic zone near the crack tips under the uniaxial tension using ordinary state-based peridynamics. Fatigue Fract Eng Mater Struct 41:1159–1170
de Souza Neto EA, Peric D, Owen DRJ (2011) Computational methods for plasticity: theory and applications. Wiley, New York
Silling SA, Askari E (2005) A meshfree method based on the peridynamic model of solid mechanics. Comput Struct 83:1526–1535
Le QV, Chan WK, Schwartz J (2014) A two-dimensional ordinary, state-based peridynamic model for linearly elastic solids. Int J Numer Meth Eng 98:547–561
Funding
This work was supported by the Sharif University of Technology [Grant Number QA961027].
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Asgari, M., Kouchakzadeh, M.A. An equivalent von Mises stress and corresponding equivalent plastic strain for elastic–plastic ordinary peridynamics. Meccanica 54, 1001–1014 (2019). https://doi.org/10.1007/s11012-019-00975-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11012-019-00975-8