Abstract
It is considered a heat conduction in a layer made of two conductors distributed in the form of laminas with varied thicknesses. Macroscopic (averaged) properties of the layer are continuously “transversally” graded across its thickness (TGL layer), cf. Fig. 1. The aim of the paper is to present and apply an averaged model of the heat conduction, obtained within the tolerance averaging technique, discussed in the book edited by Woźniak et al. (Thermomechanics of microheterogeneous solids and structures. Tolerance averaging approach, Łódź, Wydawnictwo Politechniki Łódzkiej, 2008). It is shown that the proposed model describes the microstructural effect on the heat conduction of the TGL layer. Moreover, results obtained within this model are compared to results by the higher order theory (cf. Aboudi et al., Composites B, 30:777–832, 1999).
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Aboudi J, Pindera M-J, Arnold SM (1999) Higher-order theory for functionally graded materials. Composites, Part B 30:777–832
Bansal Y, Pindera M-J (2003) Efficients reformulation of the thermoelastic higher-order theory for functionally graded materials. J Therm Stresses 26:1055–1092
Chiba R (2009) Stochastic thermal stresses in an FGM annular disc of variable thickness with spatially random heat transfer coefficients. Meccanica 44:159–176
Ferreira AJM, Batra RC, Roque, CMC, Qian, LF, Jorge, RMN (2006) Natural frequencies of functionally graded plates by a meshless method. Comp Struct 75:593–600
Goldberg RK, Hopkins DA (1995) Thermal analysis of a functionally graded material subject to a thermal gradient using the boundary element method. Comp Eng 5:793–806
Ignaczak J, Baczyński ZF (1997) On a refined heat-conduction theory of micro-periodic layered solids. J Therm Stresses 20:749–771
Itoh Y, Takahashi M, Takano H (1996) Design of tungsten/copper graded composite for high heat flux components. Fusion Eng Des 31:279–289
Jędrysiak J (2003) The length-scale effect in the buckling of thin periodic plates resting on a periodic Winkler foundation. Meccanica 38:435–451
Jędrysiak J, Michalak B (2010) On the modelling of stability problems for thin plates with functionally graded structure. Thin-Walled Struct. doi:10.1016/j.tws.2010.09.005
Jędrysiak J, Radzikowska A (2007) On the modelling of heat conduction in a non-periodically laminated layer. J Theor Appl Mech 45:239–257
Jędrysiak J, Woźniak Cz (2006) On the propagation of elastic waves in a multiperiodically reinforced medium. Meccanica 41:553–569
Jikov VV, Kozlov, SM, Oleinik, OA (1994) Homogenization of differential operators and integral functionals. Springer, Berlin
Kantor BY, Smetankina NV, Shupikov AN (2001) Analysis of non-stationary temperature fields in laminated strips and plates. Int J Solids Struct 38:8673–8684
Ke L-L, Yang J, Kitipornchai S (2009) An analytical study on the nonlinear vibration of functionally graded beams. Meccanica 45:743–752
Kim K-S, Noda N (2001) Green’s function approach to three-dimensional heat conduction equation of functionally graded materials. J Therm Stresses 24:457–477
Kim K-S, Noda N (2002) A Green’s function approach to the deflection of a FGM plate under transient thermal loading. Arch Appl Mech 72:127–137
Matysiak SJ (1991) On certain problems of heat conduction in periodic composites. Z Angew Math Mech 71:524–528
Michalak B, Woźniak Cz, Woźniak M (2007) Modelling and analysis of certain functionally graded heat conductors. Arch Appl Mech 77:823–834
Ootao Y, Tanigawa Y (2004) Transient thermoelastic problem of functionally graded thick strip due to nonuniform heat supply. Comp Struct 63:139–146
Ootao Y, Tanigawa Y (2006) Transient thermoelastic analysis for a functionally graded hollow cylinder. J Therm Stresses 29:1031–1046
Reiter T, Dvorak GJ, Tvergaard V (1997) Micromechanical models for graded composite materials. J Mech Phys Solids 45:1281–1302
Roque CMC, Ferreira AJM, Jorge RMN (2007) A radial basis function approach for the free vibration analysis of functionally graded plates using a refined theory. J Sound Vibr 300:1048–1070
Sadowski T, Ataya S, Nakonieczny K (2009) Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side. Comparison of two applied methods for problem solution. Comput Mater Sci 45:624–632
Santos H, Mota Soares CM, Mota Soares CA, Reddy JN (2008) A semi-analytical finite element model for the analysis of cylindrical shells made of functionally graded materials under thermal shock. Comp Struct 86:10–21
Schmauder S, Weber U (2001) Modelling of functionally graded materials by numerical homogenization. Arch Appl Mech 71:182–192
Sladek J, Sladek V, Zhang Ch (2003) Transient heat conduction analysis in functionally graded materials by the meshless local boundary integral equation method. Comput Mater Sci 28:494–504
Suresh S, Mortensen A (1998) Fundamentals of functionally graded materials. The University Press, Cambridge
Tornabene F, Viola E (2009) Free vibration analysis of functionally graded panels and shells of revolution. Meccanica 44:255–281
Woźniak Cz, Michalak B, Jędrysiak J (eds) (2008) Thermomechanics of microheterogeneous solids and structures. Tolerance averaging approach. Wydawnictwo Politechniki Łódzkiej, Łódź
Woźniak Cz, Wierzbicki E (2000) Averaging techniques in thermomechanics of composite solids. Wydawnictwo Politechniki Częstochowskiej, Częstochowa
Woźniak M, Wierzbicki E, Woźniak Cz (2001) A macroscopic model of the diffusion and heat transfer processes in a periodically micro-stratified solid layer. Acta Mech 157:175–185
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Jędrysiak, J., Radzikowska, A. Tolerance averaging of heat conduction in transversally graded laminates. Meccanica 47, 95–107 (2012). https://doi.org/10.1007/s11012-010-9420-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11012-010-9420-y