Skip to main content
Log in

Porosity and Corrosion Properties of Electrolyte Plasma Coatings on Magnesium Alloys

  • Published:
Materials Science Aims and scope

Abstract

It is shown that oxide-ceramic coatings on magnesium alloys are, in general, characterized by high corrosion resistance depending on the porosity of the coating. The surface topology of oxide-ceramic coatings on IMV2 and VMD10 alloys is studied to reveal discontinuities by using special procedures of immersion and electrochemical deposition. Craters detected as a specific feature of the topology of the coatings and not always through and, in this case, they do not affect the corrosion resistance of the alloys. Isolated pores are formed, most often around the craters, in the process of oxidation under the action of high thermal stresses. On the basis of the comparative analysis of various materials and corrosive media, it is possible to make a conclusion that the corrosion resistance of magnesium alloys with oxide-ceramic coatings in acid media is mainly determined by the chemical composition of the alloy. At the same time, in neutral media, it is determined by the porosity of the coatings.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

REFERENCES

  1. H. Godard, W. Jepson, H. Bothwell, and R. Kane, The Corrosion of Light Metals, Wiley, New York (1967).

    Google Scholar 

  2. G. Song and A. Atrens, “Corrosion mechanisms of magnesium alloys,” Adv. Eng. Mater., No. 1, 11–33 (1999).

  3. E. Ghali, W. Dietzel, and K. U. Kainer, “General and localized corrosion of magnesium alloys —A critical review,” J. Mater. Eng. Perform, 13, No.1, 7–23 (2004).

    Article  CAS  Google Scholar 

  4. M. Klapkiv, D. Zaverbnyi, P. Sydor, and V. Posyvailo, “Properties of magnetic alloys with oxide-ceramic coatings in weakly acid electrolytes,” Fiz.-Khim. Mekh. Mater., 38, Special Issue No. 3, 577–981 (2002).

    Google Scholar 

  5. A. L. Yerokhin, X. Nie, A. Leyland, et. al., “Plasma electrolysis for surface engineering,” Surf. Coat. Technol. 122, 73–93 (1999).

    Article  CAS  Google Scholar 

  6. H. M. Nykyforchyn, W. Dietzel, and M. D. Klapkiv, “Synthesis of oxide-ceramic coatings on magnesium alloys and their corrosion properties,” J. High. Temper. Mater. Proc., 7, No.2, 241–246 (2003).

    Article  CAS  Google Scholar 

  7. H. M. Nykyforchyn, W. Dietzel, M. D. Klapkiv, and C. Blawert, “Corrosion properties of conversion plasma-coated magnesium alloys,” in: Magnesium, Sixth Internat. Conf. on Magnesium Alloys and Their Applications (Wolfsburg, Germany, December, 2003), Wolfsburg (2003), pp. 176–181.

  8. V. T. Yavorivskii, I. P. Mercalo, and M. D. Klapkiv, A Procedure of Application of Oxide Coatings to Aluminum Alloys. Patent of the Ukraine No.56482 A.

Download references

Author information

Authors and Affiliations

Authors

Additional information

__________

Published in Fizyko-Khimichna Mekhanika Materialiv, Vol. 40, No. 5, pp. 13–17, September–October, 2004.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Dietzel, W., Klapkiv, M., Nykyforchyn, H. et al. Porosity and Corrosion Properties of Electrolyte Plasma Coatings on Magnesium Alloys. Mater Sci 40, 585–590 (2004). https://doi.org/10.1007/s11003-005-0085-y

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11003-005-0085-y

Keywords

Navigation