Abstract
Iron poly(acrylic acid-co-acrylamide) (FeAA) and melamine polyphosphate (MPP) were synthesized, characterized by FTIR and blended with linear low-density polyethylene (LLDPE). The thermogravimetric analysis results exhibited that MPP, FeAA and MPP/FeAA increased the char residue of LLDPE at 750 °C. Cone calorimeter data demonstrated that MPP, FeAA and MPP/FeAA decreased the peak of heat release rate (pHRR) and total heat release of LLDPE. Digital photographs, SEM images, EDXS and FTIR analyses of char formed after cone test indicated that the presence of FeAA did not support formation of coherent char during combustion process of LLDPE. In contrast, LLDPE/MPP composite formed high-quality char layer on polymer surface. Moreover, addition of MPP to LLDPE/FeAA composites assisted in formation of char containing iron polyphosphate and polyaromatic structure. The mechanical properties, namely tensile strength, Young’s modulus, elongation at break and hardness of LLDPE composites, were measured.
Similar content being viewed by others
References
Xie F, Wang YZ, Yang B, Liu Y. A novel intumescent flame-retardant polyethylene system. Macromol Mater Eng. 2006;291:247–53.
Cao Z, Zhang Y, Song P, Cai Y, Guo Q, Fang Z, Peng M. A novel zinc chelate complex containing both phosphorus and nitrogen for improving the flame retardancy of low density polyethylene. J Anal Appl Pyrolysis. 2011;92:339–46.
Hassan M, Nour M, Abdelmonem Y, Makhlouf G, Abdelkhalik A. Synergistic effect of chitosan-based flame retardant and modified clay on the flammability properties of LLDPE. Polym Degrad Stab. 2016;133:8–15.
Morgan AB. A review of transition metal-based flame retardants: transition metal oxide/salts, and complexes. In: ACS symposium series—fire and polymers V: materials and concepts for fire retardancy, Oxford University Press; 2009. pp. 312–328.
Hirschler MM. Thermal analysis and flammability of polymers effect of halogen-metal additive systems. Eur Polym J. 1983;19:121–9.
Holcik J, Kosik M, Benbow AW, Cullis CF. The oxidative thermal degradation of polypropylene and the influence of transition metal chelates. Eur Polym J. 1978;14:769–72.
Benbow AW, Cullis CF, Laver HS. Effects of metal chelates on the oxidation of polyolefins at high temperatures. Polymer. 1978;19:824–8.
Ranaweera RPR, Gerald S. Mechanisms of antioxidant action antioxidant behaviour of nickel complex UV stabilisers. Eur Polym J. 1976;12:825–30.
Cullis CF, Hirschler MM. Char formation from polyolefins correlations with low-temperature oxygen uptake and with flammability in the presence of metal-halogen systems. Eur Polym J. 1984;20:53–60.
Lewin M, Endo M. Catalysis of intumescent flame retardancy of polypropylene by metallic compounds. Polym Adv Technol. 2003;14:3–11.
Hassan MA, Shehata AB. The effect of some polymeric metal chelates on the flammability properties of polypropylene. Polym Degrad Stab. 2004;85(1):733–40.
Hassan MA. Effect of incorporation of butyl acrylate–iron chelate resin on the flammability properties of mg(oh)2-LDPE compositions. Polym Plast Technol Eng. 2004;43(5):1487–501.
Abd El-wahab H, Abd El-fattah M, Ahmed AH, Elhenawy AA, Alian NA. Synthesis and characterization of some arylhydrazone ligand and its metal complexes and their potential application as flame retardant and antimicrobial additives in polyurethane for surface coating. J Organomet Chem. 2015;791:99–106.
Wang DY, Liu Y, Ge XG, Wang YZ, Stec A, Biswas B, Hull TR, Price D. Effect of metal chelates on the ignition and early flaming behaviour of intumescent fire-retarded polyethylene systems. Polym Degrad Stab. 2008;93:1024–30.
Xie J, Liu X, Liang J. Absorbency and adsorption of poly(acrylic acid-co-acrylamide) hydrogel. J Appl Polym Sci. 2007;106:1606–13.
Duran S, Solpan D, Gueven O. Synthesis and characterization of acrylamide ± acrylic acid hydrogels and adsorption of some textile dyes. Nucl Instrum Methods Phys Res. 1999;B151:196–9.
Fu X, Liu Y, Wang Q, Zhang Z, Wang Z, Zhang J. Novel synthesis method for melamine polyphosphate and its flame retardancy on glass fiber reinforced polyamide. Polym Plast Technol Eng. 2011;50:1527–32.
Cichy B, Łuczkowska D, Nowak M, Władyka-przybylak M. Polyphosphate flame retardants with increased heat resistance. Ind Eng Chem Res. 2003;42:2897–905.
Nowak M, Cichy B. Kinetics of melamine phosphate thermal decomposition in DSC studies. J Therm Anal Calorim. 2016;126(1):277–85.
Lubczak J, Lubczak R. Melamine polyphosphate—the reactive and additive flame retardant for polyurethane foams. Acta Chim Slov. 2016;63:77–87.
Braun U, Schartel B, Fichera MA, Ja C. Flame retardancy mechanisms of aluminium phosphinate in combination with melamine polyphosphate and zinc borate in glass-fibre reinforced polyamide 6,6. Polym Degrad Stab. 2007;92:1528–45.
Li L, Guo W, Guo C. Synergistic effect of melamine polyphosphate and aluminum hypophosphite on mechanical properties and flame retardancy of HDPE/wood flour composites. Wood Sci Technol. 2017;51:493–506.
Nyambo C, Kandare E, Wilkie CA. Thermal stability and flammability characteristics of ethylene vinyl acetate (EVA) composites blended with a phenyl phosphonate-intercalated layered double hydroxide (LDH), melamine polyphosphate and/or boric acid. Polym Degrad Stab. 2009;94:513–20.
Leistner M, Abu-Odeh AA, Rohmer SC, Grunlan JC. Water-based chitosan/melamine polyphosphate multilayer nanocoating that extinguishes fire on polyester-cotton fabric. Carbohydr Polym. 2015;130:227–32.
Huang G, Liang H, Wang Y, Wang X, Gao J, Fei Z. Combination effect of melamine polyphosphate and graphene on flame retardant properties of poly(vinyl alcohol). Mater Chem Phys. 2012;132:520–8.
Zhao P, Guo C, Li L. Exploring the effect of melamine pyrophosphate and aluminum hypophosphite on flame retardant wood flour/polypropylene composites. Constr Build Mater. 2018;170:193–9.
Makhlouf G, Hassan M, Nour M, Abdelmonem Y, Abdelkhalik A. A novel intumescent flame retardant: synthesis and its application for linear low-density polyethylene. Arab J Sci Eng. 2017;42:4339–49.
Makhlouf G, Hassan M, Nour M, Abdel-Monem YK, Abdelkhalik A. Evaluation of fire performance of linear low-density polyethylene containing novel intumescent flame retardant. J Therm Anal Calorim. 2017;130:1031–41.
Dayanand C, Bhikshamaiah G, Tyagaraju VJ, Salagram M. Structural investigations of phosphate glasses: a detailed infrared study of the x(PbO)−(1−x) P2O5 vitreous system. J Mater Sci. 1996;31:1945–67.
Nesrinne S, Djamel A. Synthesis, characterization and rheological behavior of pH sensitive poly(acrylamide-co-acrylic acid) hydrogels. Arab J Chem. 2017;10:539–47.
Dweik H, Sultan W, Sowwan M. Analysis characterization and some properties of polyacrylamide copper complexes. Int J Polym Mater. 2008;57:228–44.
Magalhães ASG, Neto MPA, Bezerra MN, Ricardo NMPS, Feitosa JPA. Application of FTIR in the determination of acrylate content in poly(sodium acrylateco-acrylamide) superabsorbent hydrogels. Quim Nova. 2012;35:1464–7.
Shi E, Choo G, Tang X, Sheng Y, Xue J. Controlled loading of superparamagnetic nanoparticles in fluorescent nanogels as effective T2-weighted MRI contrast agents. J Mater Chem. 2011;21:2310–9.
Vflcu R, Bujor II, Olteanu M, Demetrescu I. Thermal stability of copolymer acrylamide-maleic anhydride. J Appl Polym Sci. 1987;33:2431–7.
Sheng HU, Fei C, Junguo L, Qiang S, Lianmeng Z. Influencing mechanism and interaction of muscovite on thermal decomposition of ammonium polyphosphate. J Wuhan Univ Technol Mater Sci Ed. 2016;31(2):334–9.
Wang J, Wang D, Liu Y, Ge X, Wang Y. Polyamide-enhanced flame retardancy of ammonium polyphosphate on epoxy resin. J Appl Polym Sci. 2008;108:2644–53.
Zhang Y, Li X, Fang Z, Hull TR, Kelarakis A, Stec AA. Mechanism of enhancement of intumescent fire retardancy by metal acetates in polypropylene. Polym Degrad Stab. 2017;136:139–45.
He Z, Honeycutt CW, Zhang T, Bertsch PM. Preparation and FT–IR characterization of metal phytate compounds. J Environ Qual. 2006;35:1319–28.
Callister WD, David G. Materials science and engineering: an introduction. 5th ed. Hoboken: Wiley; 2000.
Ishiaku US, Pang KW, Lee WS, Ishak Z. Mechanical properties and enzymatic degradation of thermoplastic and granular sago starch filled poly(ε-caprolactone). Eur Polym J. 2002;38(2):393–401.
Tsou CH, Lee HT, Tsai HA, Cheng HJ, Suen MC. Synthesis and properties of biodegradable polycaprolactone/polyurethanes by using 2,6-pyridinedimethanol as a chain extender Polym. Degrad Stab. 2013;98(2):643–50.
Jamal NA, Anuar H, Bahri ARS. The influence of EB-irradiated treatment on enhancing barrier property and crystallization behavior of rubber-toughened nanocomposites. J Nanotechnol. 2011;2011:1–8.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Abdelkhalik, A., Abdel-Hakim, A., Makhlouf, G. et al. Effect of iron poly(acrylic acid-co-acrylamide) and melamine polyphosphate on the flammability properties of linear low-density polyethylene. J Therm Anal Calorim 138, 1021–1031 (2019). https://doi.org/10.1007/s10973-019-08293-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-019-08293-7