Abstract
Dimethyl sulfoxide (DMSO) has been extensively used as a solvent because of its high-performance characteristics. However, there have been accidents when DMSO has been used in some chemical processes (Lam et al. in J Therm Anal Calorim 85:25–30, 2006; http://riscad.db.aist.go.jp/PHP_EN/index.php). Although the decomposition mechanism of DMSO under acidic conditions is known (Santosusso et al. in Tetrahedron Lett 48:4255–4258, 1974), the number of studies about thermal behavior of DMSO under acidic condition is not large. The purpose of this investigation is to understand the decomposition thermal behavior of DMSO under acidic conditions. Thermal analysis using an accelerating rate calorimeter (ARC) was carried out with acids chosen for their acid dissociation degree constant (pKa), which is a typical parameter of acid strength. ARC data show that the self-heat rate increased and the exothermic onset temperature decreased with decreasing pKa. Additionally, the exothermic onset temperature and pKa had good linear correlation. To verify the initial exothermic reaction, differential scanning calorimetry (DSC) analysis was carried out. DSC results showed that the exothermic onset temperature was due to decomposition of DMSO. The activation energy of the decomposition reaction was calculated from the ARC results (self-heat rate). Our data indicate that the activation energy of the decomposition reaction decreased with decreasing pKa. Therefore, thermal hazards of DMSO increase with the decrease in pKa, with good linear correlation.
Similar content being viewed by others
References
Lam TT, Vickey T, Tuma L. Thermal hazards and safe scale-up of reactions containing dimethyl sulfoxide. J Therm Anal Calorim. 2006;85:25–30.
National Institute of Advanced Industrial Science and Technology, Japan Science and Technology Agency: Relational Information System for Chemical Accidents Database. http://riscad.db.aist.go.jp/PHP_EN/index.php. Accessed 19 Sept 2014.
Santosusso MT, Swern D. Acid catalysis as a basis for a mechanistic rational some dimethyl sulfoxide reactions. Tetrahedron Lett. 1974;48:4255–8.
Grewer T, Frurip D, Harrison K. Prediction of thermal hazards of chemical reactions. J Loss Prev Proces Ind. 1999;12:391–8.
Yang XW, Zhang XY, Guo ZC, Bai WS, Hao L, Wei HY. Effects of incompatible substances on thermal stability of dimethyl sulfoxide. Thermochim Acta. 2013;559:76–81.
Wang Z, Richter MS, Gates D, Grieme AT. Safety concerns in pharmaceutical manufacturing process using dimethyl sulfoxide (DMSO) as a solvent. Org Proces Res Dev. 2012;16:1994–2000.
Bollyn M. DMSO can be more than a solvent: thermal analysis of its chemical interactions with certain chemicals at different process stages. Org Process Res Dev. 2006;10:1299–312.
Fierz H. Assessment of thermal safety during distillation of DMSO. IChemE Sym. Series. 1994;134:563–74.
Ooizumi N, Miyake A. Hazard analysis of tetrahydrofuran and dimethylsulfoxide mixture solvents for efficient use in reaction processes. J Therm Anal Calorim. 2014;. doi:10.1007/s1097301439394.
Ooizumi N, Yoshino S, Kumasaki M, Miyake A. Influence of dimethyl sulfoxide on exothermic decomposition of peroxide-containing tetrahydrofuran. Sci Tech Energ Mater. 2011;72:111–5.
Traynelis VJ, Hergenrother LW. Decomposition of dimethyl sulfoxide aided by ethylene glycol, acetamide, and related compounds. J Org Chem. 1964;29:221–2.
Yiannios NC, Karabinos VJ. Oxidation of thiols by dimethyl sulfoxide. J Org Chem. 1963;28:3246–8.
Head DL, McCarty GC. The thermal decomposition of DMSO. Tetrahedron Lett. 1973;16:1405–8.
Brogli F, Grimm P, Meyer M, Zubler H. Hazards of self-accelerating reaction. Proc 3rd Int Symp Loss Prev Safety Promot Proces Ind. 1980; 2:665–683.
Grewer T. Thermal hazards of chemical reactions. Amsterdam: Elsevier; 1994. p. 210.
Lowe GO. Halogen-hydrogen halide catalysis of the oxidation of thiols to disulfides by sulfoxides. J Org Chem. 1975;40:2096–8.
Aida T, Furukawa N, Oae S. Catalytic reduction of dimethyl sulfone and other sulfoxide with bromine—hydrobromic acid system. Tetrahedron Lett. 1973;14:3853–6.
Majetich G, Hicks R, Reister S. Electrophilic aromatic bromination using bromodimethylsulfonium bromide generated in Situ. J Org Chem. 1997;62:4321–6.
Bordwell GF. Equilibrium acidities in dimethyl sulfoxide solution. Acc Chem Res. 1988;21:456–63.
Olmstead WN, Margolin Z, Bordwell GF. Acidities of waters and simple alcohols in dimethyl sulfoxide solution. J Org Chem. 1980;45:3295–9.
Whiting FL, Tou CJ. Thermal hazard evaluation of styrene polymerization by accelerating rate calorimetry. J Therm Anal. 1982;24:111–32.
Townsend I. A basic strategy for the thermal stability assessment of pharmaceutical synthetic intermediates and products. J Them Anal. 1991;37:2031–65.
Townsend DI, Tou JC. Thermal hazard evaluation by an accelerating rate calorimeter. Thermochim Acta. 1980;37:1–30.
Iizuka Y, Fujita A, Akiba K, Tomita Y. A study on reliability of adiabatic kinetic equation from ARC data. J Japan Soc Safety Eng. 2000;39:91–97. (in Japanese).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Babasaki, Y., Iizuka, Y. & Miyake, A. Influence of organic acid on the thermal behavior of dimethyl sulfoxide. J Therm Anal Calorim 121, 295–301 (2015). https://doi.org/10.1007/s10973-015-4561-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-015-4561-9