Strontium isolation from natural samples with Sr resin and subsequent determination of ⁹⁰Sr</p> </p>

Summary

The reliability of an ⁹⁰Sr determination method was tested using an Sr extraction chromatographic resin for strontium isolation. The ⁹⁰Sr-content in samples of vegetables, soil and water (obtained from Environmental Measurement Laboratory, USA) were determined and the results were controlled by classical methods and by using an anion-exchanger and an alcohol solution of nitric acid for the strontium isolation. These methods were previously tested by determining ⁹⁰Sr in IAEA 326 and 327 samples of soil. It is shown that the isolation process with Sr resin is simpler and faster than the classical and mixed solvent anion-exchange methods. The efficiency of isolation on a Sr column depends on the resin quantity and separation conditions; and is the highest with a Sr column, compared to the classical and anion-exchange methods. Experimental data and theoretical models were used to calculate the parameters that enable the estimation of optimum dimensions of the column for isolation. A simple relation is proposed for the calculation of breakthrough volume, which defines the sample and eluent volumes for an optimal strontium isolation.</p> </p>