Abstract
A 6-kVA three-phase model of the flux transfer-type current-limiting transformer was developed and tested. In this device, the winding loops of YBCO superconducting tapes couple magnetically two independent iron cores: the primary-side iron core and the secondary-side iron core. The former and the latter are equipped with copper primary and secondary windings, respectively. Because the magnetic fluxes linked to the superconducting winding loops must be kept constant, the magnetic flux is transferred by the superconducting YBCO loops between the two iron cores in order to couple magnetically the primary and secondary coils. While the YBCO loops are superconducting, 100 % of the magnetic flux is transferred and the device shows the similar function as usual transformers. Once the YBCO loops become normal by a fault current in any of the windings, the power transfer between two iron cores is limited and the current in the secondary winding is limited naturally on a result of decoupling the iron cores.
Similar content being viewed by others
References
Noe, M., Steurer, M.: High-temperature superconductor fault current limiters: concepts, applications and development status. Supercond. Sci. Technol. 20(3), 15–27 (2007)
Tixador, P.: Development of superconducting power devices in Europe. Phys. C 470, 971–979 (2010)
Kosa, J., Vajda, I.: Novel 3-phase self-limiting transformer with magnetic flux applied by perfect closed YBCO wire loops. IEEE Trans. Appl. Supercond. 21, 1388–1392 (2011)
Xin, Y., Hong, H., Wang, J.Z., Gong, W.Z., Zhang, J.Y., Ren, A.L., Zi, M.R., Xiong, Z.Q., Si, D.J., Ye, F.: Performance of the 35 kV/90 MVA SFCL in live-grid fault current limiting tests. IEEE Trans. Appl. Supercond. 21(3), 1294–1297 (2011)
Wolfus, Y., Nikulshin, Y., Friedman, A., Yeshurun, Y.: Double storey three phase saturated cores fault current limiter. In: 11th European Conference on Applied Superconductivity (EUCAS2013) IOP Publishing Journal of Physics: Conference Series 507 (2014) Article Number: 032058
Wojtasiewicz, G., Janowski, T., Kozak, S., Kozak, J., Majka, M., Kondratowicz-Kucewicz, B.: Experimental investigation of a model of a transformer-type superconducting fault current limiter with a superconducting coil made of a 2G HTS tape. IEEE Trans. Appl. Supercond. 24(3), 5601005 (2014)
Choi, H.-S., Cho, Y.-S., Lim, S.-H.: Operational characteristics of hybrid-type SFCL by the number of secondary windings with YBCO films. IEEE Trans. Appl. Supercond. 16(2), 719–722 (2006)
Geçer, S., Ertekin, E., Yanmaz, E., Kosa, J., Safran, S., Özgüzel, R., Kilicarslan, E.S., Kilic, A., Gencer, A.: Switching and decoupling effects in a single-phase transformer using extra DC current. IEEE Trans. Appl. Supercond. 26(3), 5500504 (2016)
Acknowledgments
This research was financially supported by the Republic of Turkey Ministry of Development (Grant No. 2010K120520) and by the Technological Research Council of Turkey, TUBITAK (Grant No. 113F205).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ertekin, E., Gecer, S., Yanmaz, E. et al. Test of 6-kVA Three-Phase Flux Transfer-Type Current-Limiting Transformer. J Supercond Nov Magn 30, 3549–3553 (2017). https://doi.org/10.1007/s10948-016-3623-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10948-016-3623-y