Abstract
The purpose of this study was to evaluate and improve the ammonia adsorption performance of Na/K-ETS-10 material using an ion exchange method followed by calcination process to replace its Na+/K+ ions with H+ ions. The Na/K-ETS-10 starting material and the obtained H-type ETS-10 sample were investigated by temperature-programmed desorption of NH3, NH3 breakthrough test and NH3 absorption isotherm (10–30 °C). When the modification method is used, not only the H-type ETS-10 sample showed the highest NH3 adsorption capacity of 6.2 mol/kg at 10 °C, but also there is an overall remarkable improvement in the NH3 breakthrough time in comparison with original one.
Similar content being viewed by others
References
P. De Luca, T.G. Poulsen, A. Salituro, A. Tedeschi, D. Vuono, Z. Kònya, D. Madaràsz, J. B. Nagy, J. Therm. Anal. Calorim. 122, 1257 (2015)
R.S. Pillai, S.A. Peter, R.V. Jasra, Microporous Mesoporous Mater. 113, 268 (2008)
T. Armaroli, G. Busca, F. Milella, F. Bregani, G.P. Toledo, A. Nastro, P. De Luca, G. Bagnasco, M. Turco, J. Mater. Chem. 10, 1699 (2000)
S.M. Kuznicki, V.A. Bell, S. Nair, H.W. Hillhouse, R.M. Jacubinas, C.M. Braunbarth, B.H. Toby, M. Tsapatsis, Nature 412, 720 (2001)
S.M. Kuznicki, Large-pore crystalline titanium molecular sieve zeolites, U.S. Patent 4,853,202 (1989)
S.M. Kuznicki, Small-pore crystalline titanium molecular sieve zeolites, U.S. Patent 4,938,939 (1990)
X. Yang, P.W. Blosser, Zeolites 17, 237 (1996)
Y.K. Krisnandi, E.E. Lachowski, R.F. Howe, Chem. Mater. 18, 928 (2006)
M. Koc, S. Galioglu, D. Toffoli, H. Ustunel, B. Akata, J. Phys. Chem. C 118, 27281 (2014)
N.A. Turta, M. Veltri, D. Vuono, P. De Luca, N. Bilba, A. Nastro, J. Porous Mater. 16, 527 (2009)
E.A. Feijani, A. Tavasoli, H. Mahdavi, Ind. Eng. Chem. Res. 54, 12124 (2015)
P.D. Southon, R.F. Howe, Chem. Mater. 14, 4209 (2002)
S.W. Park, Y.H. Yun, S.D. Kim, S.T. Yang, W.S. Ahn, G. Seo, W.J. Kim, J. Porous Mater. 17, 589 (2010)
G. De Raffele, A. Aloise, P. De Luca, D. Vuono, A. Tagarelli, J.B. Nagy, J. Porous Mater. 23, 389 (2016)
Y. Goa, H. Yoshitake, P. Wu, T. Tatsumi, Microporous Mesoporous Mater. 70, 93 (2004)
R.F. Howe, Y.K. Krisnandi, Chem. Commun. 17, 1588 (2001)
S.H. Noh, S.D. Kim, Y.J. Chung, J.W. Park, D.K. Moon, D.T. Hayhurst, W.J. Kim, Microporous Mesoporous Mater. 88, 197 (2006)
G. Bagnasco, M. Turco, G. Busca, T. Armaroli, A. Nastro, P. De Luca, Adsorpt. Sci. Technol. 21, 683 (2003)
X. Yang, R.E. Truitt, J. Phys. Chem. 100, 3713 (1996)
L. Lv, J.K. Zhou, F. Su, X.S. Zhao, J. Phys. Chem. C 111, 773 (2007)
C.C. Pavel, B. Zibrowius, E. Loffler, W. Schmidt, Phys. Chem. Chem. Phys. 9, 3440 (2007)
M.J. Nash, R.F. Lobo, D.J. Doren, Appl. Catal. B 88, 232 (2009)
Y.K. Krisnandi, R.F. Howe, Appl. Catal. A 307, 62 (2006)
G. Koermer, A. Thangaraj, S. Kuznicki, Stud. Surf. Sci. Catal. 135, 142 (2001). doi:10.1016/S0167-2991(01)81222-2
Acknowledgements
This work was supported by the R&D Center for Eco-Innovation R&D Project (2014000150007) funded by Korea Environmental Industry & Technology Institute.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, S.D., Magnone, E., Park, J.H. et al. Evaluation and improvement of the NH3 adsorption capacity of Engelhard titanosilicate (ETS) materials. J Porous Mater 25, 297–302 (2018). https://doi.org/10.1007/s10934-017-0442-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10934-017-0442-x