Abstract
The morphological changes during carbon foam synthesis depend on the process pressure and temperature, melting temperature, and viscosity of the mesophase pitch. This study is focused on interpreting the foaming mechanism and analysing the preparation process of mesophase pitch based carbon foams. Results have shown that more homogenous and better structured carbon foams were derived under higher pressure. The carbon foams exhibited higher density and strength at this pressure.
Similar content being viewed by others
References
A. Bonzom, A.P. Crepaux, A. M. Moutard, U.S. Patent no: 4276246, 1981
K.M. Kearns, U.S. Patent no: 5868974, 1999
K.M.U. Kearns, U.S. Patent no: 5961814, 1999
M.X. Wang, C.Y. Wang, Y.L. Li, C. Zhang, Carbon 45, 687–689 (2007)
N.C. Gallego, J.W. Klett, Carbon 41, 1461–1466 (2003)
T.Q. Li, C.Y. Wang, B.X. An, H. Wang, Carbon 43, 2030–2032 (2005)
J.W. Klett, U.S. Patent no: 6261485, 2001
J.W. Klett, U.S. Patent no: 6033506, 2000
J.W. Klett, A.D. McMillan, N.C. Gallego, T.D. Burchell, C.A. Walls, J. Mater. Sci. 39, 3659–3676 (2004)
D. Gaies, K.T. Faber, Carbon 40, 1137–1140 (2002)
A. Chen, E.B. Kennel, A.H. Stiller, B.K. Elliot, H.S. Alfred, G.S. Peter, W.Z. John, Carbon 44, 1535–1543 (2006)
J.W. Klett, R. Hardy, E. Romine, C. Walls, T. Burchell, Carbon 38, 953–973 (2000)
A.M. Druma, M.K. Alam, C. Duruma, Inter. J. Therm. Sci. 43(7), 689–695 (2004)
S. Shin, A.K. Roy, J. Mech. Phys. Solids 52(1), 167–191 (2004)
T. Beechem, K. Lafdi, A. Elgafy, Carbon 43, 1055–1064 (2005)
G. Rosebrock, A. Elgafy, T. Beechem, K. Lafdi, Carbon 43, 3075–3087 (2005)
M. Wang, C. Wang, M. Chen, T. Li, Z. Hui, New Carbon Mater. 24, 61–66 (2009)
J.W. Klett, A.D. McMillan, N.C. Gallego, T.D. Burchell, C.A. Walls, Carbon 42, 1849–1852 (2004)
L.A. Hardcastle, R.G. Sheppard, D.F. Dingus, U.S. Patent no: 190414, 2002
http://www.mgc.co.jp/eng/products/abc/pdf/ar.pdf> dated retrieved 27 March 2015
M. Wang, C. Wang, M. Chen, T. Li, Z. Hu, New Carbon Mater. 24(1), 61–66 (2009)
K. Kanno, H. Tsuruya, R. Fujiura, T. Koshikawa, F. Watanabe, U.S. Patent no: 6689336, 2004
J.W. Klett, T.D. Burchell, A. Choudhury, U.S. Patent no: 7070755, 2006
Gallego N.C., Klett J.W., McMillan A.D. Effects of processing conditions on properties of carbon foam. http://www.ornl.gov/~webworks/cppr/y2001/pres/114424.pdf. Accessed 22 Dec 2014
C. Suryanarayana, G.M. Norton, X-ray Diffraction: A Practical Approach (Plenum Press, USA, 1998)
G. Savage, Carbon Carbon Composites (Chapman & Hall, London, 1993), pp. 13–26
M.X. Wang, C.Y. Wang, T.Q. Li, Z.J. Hu, Compos. Sci. Technol. 68(10–11), 2220–2223 (2008)
Y.G. Wang, Z.H. Min, M. Cao, D.P. Xu, New Carbon Mater. 24(4), 321–326 (2009)
Z. Zhang, F. Wang, X. Yu, Y. Wang, Y. Yan, K. Li, Z. Luan, J. Am. Ceram. Soc. 92(1), 260–263 (2009)
H.L. Hu, J.D. Hwang, T.H. Ko, in 4th International Microsystems, Packaging, Assembly and Circuits Technology Conference (2009), pp. 678–680
G. Tondi, V. Fierro, A. Pizzi, A. Celzard, Carbon 47, 1480–1492 (2009)
A. Celzard, W. Zhao, A. Pizzi, V. Fierro, Mater. Sci. Eng. A 527(16–17), 4438–4446 (2010)
G. Tondi, W. Zhao, A. Pizzi, G. Du, V. Fierro, A. Celzard, BioResour. Technol. 100(21), 5162–5169 (2009)
A. Celzard, V. Fierro, G. Amaral-Labat, A. Pizzi, J. Torero, Poly. Degrad. Stab. 96(4), 477–482 (2011)
G. Tondi, S. Blacher, A. Léonard, A. Pizzi, V. Fierro, J.M. Leban, A. Celzard, Microsc. Microanal. 15(5), 384–394 (2009)
Y. Lu, Z. Li, P. Wang, C. Yang, J. Appl. Polym. Sci. 121(1), 336–341 (2011)
J. Li, C. Wang, G. Cheng, Y.L. Wang, L. Zhan, W.M. Qiao, L.C. Ling, J. Porous Mater. 17(6), 685–691 (2010)
Acknowledgments
This work is part of PhD thesis funded by Department of Advanced Technologies, Istanbul Technical University.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gul, A., Yardim, M.F. Preparation and characterization of mesophase pitch based carbon foam produced at low pressure. J Porous Mater 22, 851–857 (2015). https://doi.org/10.1007/s10934-015-9958-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10934-015-9958-0