Skip to main content
Log in

Investigation on structural, optical and electrical behaviours of Sn doped copper oxide thin films and fabrication of diode

  • Published:
Journal of Materials Science: Materials in Electronics Aims and scope Submit manuscript

Abstract

Tin doped copper oxide (Sn:CuO) thin films are deposited on glass substrate with different Sn ( 2, 4 and 6 wt%) concentration using spray pyrolysis technique at an ambient substrate temperature of 600 °C. Monoclinic structure of the synthesized materials are confirmed by the XRD analysis, the average crystallite size of the coated materials are calculated using Scherrer’s formula and found to decrease with increase in Sn concentration. The average grain size of the Sn doped CuO thin films are measured from the SEM images using image J software. The EDAX graph confirms the presence of Sn in the CuO lattice. Absorption spectra of synthesized films show the increase in the absorption of incident radiation in the visible region with increase in doping of Sn ions. The refractive indices of the CuO thin films increase with the increasing of Sn concentration is observed with help of Swanepoel’s envelope relation. The band gap of the fabricated films are calculated using Tauc’s relation, it is found to decrease with the increase in Sn concentration. I–V characteristics of the samples are studied using Keithley electrometer 6517B with two probe setup from which DC conductivity had been calculated. p-SnCuO/n-Si (2, 4 and 6% of Sn doped with CuO) diodes are fabricated using jetnebulizer spray pyrolysis technique. The diode parameters are calculated with the help of JV method and it was predicted that the Sn doped CuO diodes posses the better rectification characteristic compared to pure p-CuO/n-Si diode.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

Data availability

The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.

References

  1. R. Martins et al., Zinc oxide as an ozone sensor. J. Appl. Phys. 96(3), 1398–1408 (2004). https://doi.org/10.1063/1.1765864

    Article  CAS  Google Scholar 

  2. E. Yun, Development of ZnO-based thin-film transistors with top gate structures. J. Korean Phys. Soc. 60(1), 55–58 (2012). https://doi.org/10.3938/jkps.60.55

    Article  CAS  Google Scholar 

  3. H. Belaid, M. Nouiri, Z. Ben Ayadi, K. Djessas, L. El Mir, Electrical study of Si / PS / ZnO: in solar cell structure. Energy Procedia 84, 214–220 (2015). https://doi.org/10.1016/j.egypro.2015.12.316

    Article  CAS  Google Scholar 

  4. S.S. Shariffudin, S.S. Khalid, N.M. Sahat, M.S.P. Sarah, H. Hashim, Preparation and characterization of nanostructured CuO thin films using sol-gel dip coating. IOP Conf. Ser. Mater. Sci. Eng. (2015). https://doi.org/10.1088/1757-899X/99/1/012007

    Article  Google Scholar 

  5. K.H. Al-Mayalee, N. Saadi, E. Badradeen, F. Watanabe, T. Karabacak, Optical and photoconductive response of CuO nanostructures grown by a simple hot water treatment method. J. Phys. Chem. C (2018). https://doi.org/10.1021/acs.jpcc.8b06783

    Article  Google Scholar 

  6. C. Status, H.S. Cells, Current status and future prospects of copper oxide heterojunction solar cells. Materials (2016). https://doi.org/10.3390/ma9040271

    Article  Google Scholar 

  7. F. Wang et al., A highly sensitive gas sensor based on CuO nanoparticles synthetized: Via a sol-gel method. RSC Adv. 6(83), 79343–79349 (2016). https://doi.org/10.1039/c6ra13876d

    Article  CAS  Google Scholar 

  8. L.D.L.S. Valladares et al., Crystallization and electrical resistivity of Cu 2 O and CuO obtained by thermal oxidation of Cu thin fi lms on SiO 2 / Si substrates Cu oxide Au. Thin Solid Films 520(20), 6368–6374 (2012). https://doi.org/10.1016/j.tsf.2012.06.043

    Article  CAS  Google Scholar 

  9. A. Goktas, High-quality solution-based Co and Cu co-doped ZnO nanocrystalline thin films: comparison of the effects of air and argon annealing environments. J. Alloys Compd. 735, 2038–2045 (2018). https://doi.org/10.1016/j.jallcom.2017.11.391

    Article  CAS  Google Scholar 

  10. H. Zhu, F. Zhao, L. Pan, Y. Zhang, C. Fan, J.Q. Xiao, Structural and magnetic properties of Mn-doped CuO thin films structural and magnetic properties of Mn-doped CuO thin films. J. Appl. Phy. 111, 8–11 (2012). https://doi.org/10.1063/1.2711711

    Article  CAS  Google Scholar 

  11. F.Z. Chafi, L. Bahmad, N. Hassanain, B. Fares, Characterization techniques of Fe-doped CuO thin films deposited by the Spray Pyrolysis method. 1, 1-13 (2018). https://arxiv.org/abs/1807.09697

  12. F. Bayansal, O.Sahin, H.A.Ctinkara“Mechanical and Structural properties of Li-doped CuO thin films deposited by successive Ionic Layer Adsorption and Reaction method ”. Thin Solid Films. 697(6), 137839m (2020). https://doi.org/10.1016/j.tsf.2020.137839

  13. N.M. Basith, J.J. Vijaya, L.J. Kennedy, M. Bououdina, Materials Science in Semiconductor Processing Structural, morphological, optical, and magnetic properties of Ni-doped CuO nanostructures prepared by a rapid microwave combustion method. Mater. Sci. Semicond. Process. 17, 110–118 (2014). https://doi.org/10.1016/j.mssp.2013.09.013

    Article  CAS  Google Scholar 

  14. T. Saeid Masudy-Panah, K. Radhakrishnan, H. Tan, R. Yi and N. Goutam KumarDalapati, Sol. Energy Mater. Sol. Cells. 1(140), 266–274 (2015)

  15. P Samarasekara, P G D C K Karunarathna , H P Weeramuni and C A N 10 Fernando "Electrical Properties of spin coated Zn doped CuO films". Mater. Res. Express. 5, 066418 (2018). https://doi.org/10.1088/2053-1591/aacc7e

  16. J. Wu, K.S.H.K.N. Hui, L. Li, H.C.Y.R. Cho, Characterization of Sn-doped CuO thin films prepared by a sol – gel method. J. Mater. Sci. Mater. Electron. (2015). https://doi.org/10.1007/s10854-015-3945-8

    Article  Google Scholar 

  17. M. Lai, S. Mubeen, N. Chartuprayoon, A. Mulchandani, M.A. Deshusses, N.V. Myung, Synthesis of Sn doped CuO nanotubes from core-shell Cu/SnO2 nanowires by the Kirkendall effect. Nanotechnology (2010). https://doi.org/10.1088/0957-4484/21/29/295601

    Article  Google Scholar 

  18. S. Goktas, A. Goktas, A comparative study on recent progress in efficient ZnO based nanocomposite and heterojunction photocatalysts: a review. J. Alloys Compd. (2021). https://doi.org/10.1016/j.jallcom.2021.158734

    Article  Google Scholar 

  19. S. Dolai, R. Dey, S. Das, S. Hussain, R. Bhar, A.K. Pal, Cupric oxide (CuO) thin films prepared by reactive d.c. magnetron sputtering technique for photovoltaic application. J. Alloys Compd. 724, 456–464 (2017). https://doi.org/10.1016/j.jallcom.2017.07.061

    Article  CAS  Google Scholar 

  20. M.F. Al-Kuhaili, Characterization of copper oxide thin films deposited by the thermal evaporation of cuprous oxide (Cu2O). Vacuum 82(6), 623–629 (2008). https://doi.org/10.1016/j.vacuum.2007.10.004

    Article  CAS  Google Scholar 

  21. P.B. Taunk, R. Das, D.P. Bisen, R.K. Tamrakar, N. Rathor, ScienceDirect Synthesis and optical properties of chemical bath deposited ZnO thin film. Karbala Int. J. Mod. Sci. (2015). https://doi.org/10.1016/j.kijoms.2015.11.002

    Article  Google Scholar 

  22. S.C. Ray, "Preparation of copper oxide thin "lm by the sol}gel-like dip technique and study of their structural and optical properties". Sol. Energy Mater Sol. Cells. 68, 307-312 (2001) .

  23. M. Hinna et al., Elaboration and characterization of CuO thin films by spray pyrolysis method for gas sensors applications. Proceedings 14(1), 55 (2019)

    Google Scholar 

  24. Y. Akaltun, Effect of thickness on the structural and optical properties of CuO thin films grown by successive ionic layer adsorption and reaction. Thin Solid Films 594, 30–34 (2015). https://doi.org/10.1016/j.tsf.2015.10.003

    Article  CAS  Google Scholar 

  25. H.Z. Asl, S.M. Rozati, Spray deposited nanostructured CuO thin films: influence of substrate temperature and annealing process. Mater. Res. 21(2), 1–8 (2018). https://doi.org/10.1590/1980-5373-MR-2017-0754

    Article  Google Scholar 

  26. M. Arfan et al., Results in physics tailoring of nanostructures: Al doped CuO synthesized by composite- hydroxide-mediated approach. Results Phys. 13, 102187 (2019). https://doi.org/10.1016/j.rinp.2019.102187

    Article  Google Scholar 

  27. F. Mikailzade, H. Türkan, F. Önal, M. Zarbali, A. Göktaş, A. Tumbul, Structural and magnetic properties of polycrystalline Zn1−xMnxO films synthesized on glass and p-type Si substrates using Sol-Gel technique. Appl. Phys. A Mater. Sci. Process. 127(6), 1–8 (2021). https://doi.org/10.1007/s00339-021-04519-4

    Article  CAS  Google Scholar 

  28. P. Vomáčka, V. Štengl, J. Henych, M. Kormunda, Shape-controlled synthesis of Sn-doped CuO nanoparticles for catalytic degradation of Rhodamine B. J. Colloid Interface Sci. 481, 28–38 (2016). https://doi.org/10.1016/j.jcis.2016.07.026

    Article  CAS  Google Scholar 

  29. K.M.D. Balasubramanian, K.P.N. Jhansi, Impact of Ce content on cubic phase cerium – cadmium oxide ( Ce – CdO ) nanoparticles and its n-CeCdO / p-Si junction diodes. J. Mater. Sci. Mater. Electron. (2018). https://doi.org/10.1007/s10854-018-0178-7

    Article  Google Scholar 

  30. F. Bayansal, Y. Gülen, B. Şahin, S. Kahraman, H.A. Çetinkara, CuO nanostructures grown by the SILAR method: Influence of Pb-doping on the morphological, structural and optical properties. J. Alloys Compd. 619, 378–382 (2015). https://doi.org/10.1016/j.jallcom.2014.09.085

    Article  CAS  Google Scholar 

  31. G.S.P. Venkateswaria, P. Thirunavukkarasua, T.Sivakumar, Characterization of Pure Cuo and Sn Doped Cuo Thin Films Via JNSP Technique For P-N Junction Diode Application, IOSR J. Eng. 9(4), 51–60

Download references

Funding

The authors declare that no funds, grants or other support were received during the preparation of this manuscript.

Author information

Authors and Affiliations

Authors

Contributions

All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by DB. NJ, RR. The first draft of the manuscript was written by NJ and all authors commented on previous version of the manuscript. All authors read and approved the final manuscript.

Corresponding author

Correspondence to D. Balasubramanian.

Ethics declarations

Competing interest

The authors have no relevant financial or non-financial interests to disclose.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jhansi, N., Balasubramanian, D. & Raman, R. Investigation on structural, optical and electrical behaviours of Sn doped copper oxide thin films and fabrication of diode. J Mater Sci: Mater Electron 34, 1369 (2023). https://doi.org/10.1007/s10854-023-10623-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10854-023-10623-3

Navigation