Abstract
Al-doped ZnO (AZO) thin film, which possess the advantages of low cost, low sheet resistance and high transmittance, are one of the most promising candidates to replace indium tin oxide films as the transparent electrode. However, oxidation causes a substantial increase in the sheet resistance of AZO film after exposing in ambient and especially, damp heat environment. In this work, we compare structural, optical, electrical properties and environmental stability between films prepared by two different methods: sol–gel and rf sputtering. Experimental results indicate that the properties of film can be affected by different deposition method. From the X-ray diffraction analysis, all films have hexagonal wurtzite crystal structure with different preferable orientation in two different methods. Optical transmittance spectra of the AZO films exhibited transparency higher than about 80 % within the visible wavelength region and the optical band gap (Eg) of these films was increased in sputtered film, probably due to the increase of carrier concentration. The better environmental stability was found in AZO film prepared by sputtering method. Improved surface morphology and enhancement of crystal orientation (110) was considered for this improvement.
Similar content being viewed by others
References
D.S. Ghosh, T.L. Chen, N. Formica, J. Hwang, I. Bruder, V. Pruneri, Solar Energy Mater Solar Cells 107, 338–343 (2012)
S.J. Pearton, D.P. Norton, K. Ip, Y.W. Heo, T. Steiner, Superlattices Microstruct. 34, 3–32 (2003)
T.L. Chen, D.S. Ghosh, D. Krautz, S. Cheylan, V. Pruneri, Appl. Phys. Lett. 99, 093302 (2011)
T. Miyata, Y. Ohtani, T. Kuboi, T. Minami, Thin Solid Films 516, 1354 (2008)
T. Minami, Thin Solid Films 516, 1314 (2008)
A. Illiberi, R. Scherpenborg, M. Theelen, P. Poodt, F. Roozeboom, J. Vac. Sci. Technol., A 31, 061504 (2013)
G.M. Wu, Y.F. Chen, H.C. Lu, Proceedings of the VIII International Conference ION 120 (2011)
B.Z. Dong, G.J. Fang, J. Appl. Phys. 101, 033713 (2007)
M.S. Shinde, P.B. Ahirrao, I.J. Patil, R.S. Patil, Indian J Pune Appl Phys 50, 657–669 (2012)
K. Wasa, I. Kanno, H. Kotera, Handbook of sputter deposition technology: Fundamentals and applications for functional thin films, nanomaterials and MEMS, 2nd edn. (Elsevier, Amsterdam, 2012), p. 395
H. Park et al., Thin Solid Films 519, 6910–6915 (2011)
A.H. Jayatissa, A.M. Soleimanppour, Y. Hao, Adv. Mater. Res. 383–390, 4073–4078 (2012)
S.Y. Myong, K.S. Lim, Appl. Phys. Lett. 82, 18 (2003)
C.H. Ahn, B.H. Kong, H. Kim, H.K. Cho, J. Electrochem. Soc. 158, 170–173 (2011)
Acknowledgments
This work was partly supported by the Kyoto University Global COE Program, ‘‘Energy Science in the Age of Global Warming.’’ The authors also gratefully acknowledge the Osaka Municipal Technical Research Institute for the support of thickness and Hall Effect measurement.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tabassum, S., Yamasue, E., Okumura, H. et al. Sol–gel and rf sputtered AZO thin films: analysis of oxidation kinetics in harsh environment. J Mater Sci: Mater Electron 25, 4883–4888 (2014). https://doi.org/10.1007/s10854-014-2248-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-014-2248-9