Abstract
Undercoordinated lead cations and halide anions on the surface of perovskite layer can form surface trap states and cause electronic disorders which reduce the performance of perovskite solar cells. Nitrogen-doped carbon dots (NCDs) that have rich nitrogen- and oxygen-containing functional groups can effectively interact with the unsaturated metal sites and halide anions on the surface and boundaries of perovskite grains. Herein, low-cost NCDs are utilized as efficient additives to passivate the surface of a solution-processed CH3NH3PbI3 perovskite film, which remarkably reduce charge carrier recombination, as evidenced by the results of time-resolved photoluminescence and electrochemical impedance spectrum measurements. FTIR spectra indicate the formation of hydrogen bonds between the undercoordinated iodine ions on perovskite grains and hydroxyl as well as nitrogenous groups of NCDs. In addition, NCDs additives also help increase interfacial charge transfer from perovskite to electron-transporting layer, leading to an improvement in power conversion efficiency for the solar cell device from 12.12 ± 0.28% (standard cell fabricated in same conditions) to 15.93 ± 0.15%.
Similar content being viewed by others
References
Meng FY, Zhang CY, Chen DC, Zhu WG, Yip HL, Su SJ (2017) Combined optimization of emission layer morphology and hole-transport layer for enhanced performance of perovskite light-emitting diodes. J Mater Chem C 5:6169–6175
Guo Z, Wan Y, Yang MJ, Snaider J, Zhu K, Huang LB (2017) Long-range hot-carrier transport in hybrid perovskites visualized by ultrafast microscopy. Science 356:59–62
Sutherland BR, Sargent EH (2016) Perovskite photonic sources. Nat Photonics 10:295–302
Leblanc A, Mercier N, Allain M, Dittmer J, Fernandez V, Pauporté T (2017) Lead- and iodide-deficient (CH3NH3)PbI3(d-MAPI): the bridge between 2D and 3D hybrid perovskites. Angew Chem Int Ed 56:16067–16072
Wang PJ, Shao ZP, Ulfa M, Pauporte T (2017) Insights into the hole blocking layer effect on the perovskite solar cell performance and impedance response. J Phys Chem C 121:9131–9141
Zhang W, Eperon GE, Snaith HJ (2016) Metal halide perovskites for energy applications. Nat Energy 1:16048
Lee SJ, Park JH, Lee BR, Jung ED, Yu JC, Nuzzo DD, Friend RH, Song MH (2017) Amine-based passivating materials for enhanced optical properties and performance of organic-inorganic perovskites in light-emitting diodes. J Phys Chem Lett 8:1784–1792
La-Placa MG, Longo G, Babaei A, Martinez-Sarti L, Sessolo M, Bolink HJ (2017) Photoluminescence quantum yield exceeding 80% in low dimensional perovskite thin-films via passivation control. Chem Commun 53:8707–8710
Gao L, Zeng K, Guo JS, Ge C, Du J, Zhao Y, Chen C, Deng H et al (2016) Passivated single-crystalline CH3NH3PbI3 nanowire photodetector with high detectivity and polarization sensitivity. Nano Lett 16:7446–7454
Zhang W, Pathak S, Sakai N, Stergiopoulos T, Nayak PK, Noel NK, Haghighirad AA, Burlakov VM et al (2015) Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells. Nat Commun 6:10030
Rong Y, Liu L, Mei A, Li X, Han H (2015) Beyond efficiency: the challenge of stability in mesoscopic perovskite solar cells. Adv Energy Mater 5:1501066
Ghosh S, Pal SK, Karki KJ, Pullerit T (2017) Ion migration heals trapping centers in CH3NH3PbBr3 perovskite. Acs Energy Lett 2:2133–2139
Li X, Bi DQ, Yi CY, Decoppe JD, Luo JS, Zakeeruddin SM, Hagfeldt A, Gratzel M (2016) A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells. Science 353:58–62
Wang L, Liu F, Liu TJ, Wang JW, Cai XY, Wang GT, Ma TL, Jiang C (2016) Pinhole-free perovskite films by methylamine iodide solution-assisted repair for high-efficiency photovoltaics under ambient conditions. ACS Appl Mater Interfaces 8:30920–30925
Jacobs DL, Zang L (2016) Thermally induced recrystallization of MAPbI3 perovskite under methylamine atmosphere: an approach to fabricating large uniform crystalline grains. Chem Commun 52:10743–10746
Chiang CH, Wu CG (2016) Bulk heterojunction perovskite-PCBM solar cells with high fill factor. Nat Photonics 10:196–200
Haruyama J, Sodeyama K, Han LY, Tateyama Y (2016) Surface properties of CH3NH3PbI3 for perovskite solar cells. Acc Chem Res 49:554–561
Seo J, Noh JH, Seok SI (2016) Rational strategies for efficient perovskite solar cells. Acc Chem Res 49:562–572
Tan HR, Jain A, Voznyy O, Lan XZ, García de Arquer FP, Fan JZ, Quintero-Bermudez R, Yuan MJ et al (2017) Efficient and stable solution-processed planar perovskite solar cells via contact passivation. Science 355:722–726
Xu J, Buin A, Ip AH, Li W, Voznyy O, Comin R, Yuan M, Jeon S et al (2015) Perovskite-fullerene hybrid materials suppress hysteresis in planar diodes. Nat Commun 6:7081
Abate A, Saliba M, Hollman DJ, Stranks SD, Wojciechowski K, Avolio R, Grancini G, Petrozza A, Snaith HJ (2014) Supramolecular halogen bond passivation of organic-inorganic halide perovskite solar cells. Nano Lett 14:3247–3254
Ye SY, Rao HX, Zhao ZR, Zhang LJ, Bao HL, Sun WH, Li YL, Gu FD et al (2017) A breakthrough efficiency of 19.9% obtained in inverted perovskite solar cells by using an efficient trap state passivator Cu(thiourea)I. J Am Chem Soc 139:7504–7512
Peng J, Wu Y, Ye W, Jacobs DA, Shen H, Fu X, Wan Y, Duong T et al (2017) Interface passivation using ultrathin polymer–fullerene films for high-efficiency perovskite solar cells with negligible hysteresis. Energy Environ Sci 10:1792–1800
Chaudhary B, Kulkarni A, Jena AK, Ikegami M, Udagawa Y, Kunugita H, Ema K, Miyasaka T (2017) Poly(4-vinylpyridine)-based interfacial passivation to enhance voltage and moisture stability of lead halide perovskite solar cells. Chemsuschem 10:2473–2479
Noel NK, Abate A, Stranks SD, Parrott ES, Burlakov VM, Goriely A, Snaith HJ (2014) Enhanced photoluminescence and solar cell performance via lewis base passivation of organic-inorganic lead halide perovskites. ACS Nano 8:9815–9821
Wang Y, Wang HY, Yu M, Fu LM, Qin YJ, Zhang JP, Ai XC (2015) Trap-limited charge recombination in intrinsic perovskite film and meso-superstructured perovskite solar cells and the passivation effect of the hole-transport material on trap states. Phys Chem Chem Phys 17:29501–29506
Wang F, Geng W, Zhou Y, Fang HH, Tong CJ, Loi MA, Liu LM, Zhao N (2016) Phenylalkylamine passivation of organolead halide perovskites enabling high-efficiency and air-stable photovoltaic cells. Adv Mater 28:9986–9992
Wen XR, Wu JM, Gao D, Lin CJ (2016) Interfacial engineering with amino-functionalized graphene for efficient perovskite solar cells. J Mater Chem A 4:13482–13487
Hadadian M, Correa-Baena JP, Goharshadi EK, Ummadisingu A, Seo JY, Luo JS, Gholipour S, Zakeeruddin SM et al (2016) Enhancing efficiency of perovskite solar cells via N-doped graphene: crystal modification and surface passivation. Adv Mater 28:8681–8686
Shao YH, Xiao ZG, Bi C, Yuan YB, Huang JS (2014) Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells. Nat Commun 5:5784
Tseng WS, Jao MH, Hsu CC, Huang JS, Wu CI, Yeh NC (2017) Stabilization of hybrid perovskite CH3NH3PbI3 thin films by graphene passivation. Nanoscale 9:19227–19235
Lin LP, Rong MC, Lu SS, Song XH, Zhong YX, Yan JW, Wang YR, Chen X (2015) A facile synthesis of highly luminescent nitrogen-doped graphene quantum dots for the detection of 2,4,6-trinitrophenol in aqueous solution. Nanoscale 7:1872–1878
Wang CX, Xu ZZ, Cheng H, Lin HH, Humphrey MG, Zhang C (2015) A hydrothermal route to water-stable luminescent carbon dots as nanosensors for pH and temperature. Carbon 82:87–95
Peng H, Li Y, Jiang CL, Luo CH, Qi RJ, Huang R, Duan CG, Travas-Sejdic J (2016) Tuning the properties of luminescent nitrogen-doped carbon dots by reaction precursors. Carbon 100:386–394
Zhu SJ, Meng QN, Wang L, Zhang JH, Song YB, Jin H, Zhang K, Sun HC, Wang HY, Yang B (2013) Highly photoluminescent carbon dots for multicolor patterning, sensors, and bioimaging. Angew Chem Int Ed 52:3953–3957
Lim SY, Shen W, Gao ZQ (2015) Carbon quantum dots and their applications. Chem Soc Rev 44:362–381
Im JH, Lee CR, Lee JW, Park SW, Park NG (2011) 6.5% efficient perovskite quantum-dot-sensitized solar cell. Nanoscale 3:4088–4093
Tan AD, Wang YF, Fu ZY, Tsiakaras P, Liang ZX (2017) Highly effective oxygen reduction reaction electrocatalysis: nitrogen-doped hierarchically mesoporous carbon derived from interpenetrated nonporous metal-organic frameworks. Appl Catal B Environ 218:260–266
Li B, Sun XY, Su DS (2015) Calibration of the basic strength of the nitrogen groups on the nanostructured carbon materials. Phys Chem Chem Phys 17:6691–6694
Li ZF, Ma GQ, Ge R, Qin F, Dong X, Meng W, Liu TF, Tong JH, Jiang FY, Zhou YF, Li K, Min X, Huo KF, Zhou YH (2016) Free-standing conducting polymer films for high-performance energy devices. Angew Chem Int Ed 55:979–982
Zhou YH, Fuentes-Hernandez C, Shim J, Meyer J, Giordano AJ, Li H, Winget P, Papadopoulos T et al (2012) A universal method to produce low-work function electrodes for organic electronics. Science 336:327–332
Zhao XL, Yang DL, Lv HY, Yin L, Yang XN (2013) New benzotrithiophene derivative with a broad band gap for high performance polymer solar cells. Polym Chem 4:57–60
Acknowledgements
The authors thank the CPSF (2016M602456), the NSFC (51402111, 21703070, 21573076), Guangdong Innovative and Entrepreneurial Research Team Program (2014ZT05N200), the NCET (130209), NSF (Guangdong, 2015A030312007), FRFCU (2017BQ064) and SRP (2017s10) for financial support.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Wang, Y., Zhang, J., Chen, S. et al. Surface passivation with nitrogen-doped carbon dots for improved perovskite solar cell performance. J Mater Sci 53, 9180–9190 (2018). https://doi.org/10.1007/s10853-018-2190-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-018-2190-y