Abstract
Sodium-ion batteries (SIBs) are regarded as one of the most promising alternatives to lithium-ion batteries (LIBs) for large-scale energy stationary applications due to the abundant reserve of sodium. However, it is still challenging to develop low-cost and high-performance anode materials for SIBs. Herein, heteroatom-doped hard carbons with hierarchically porous and disordered structures are prepared via pyrolysis of natural biomass cucumber stem. The electrochemical performances of the biomass carbon are significantly influenced by the carbonization temperatures due to the different microstructures and heteroatomic contents. The biomass carbon carbonized at 1000 °C delivers the highest reversible capacity of 337.9 mAh g−1 while used as the anode material for SIBs. Furthermore, the biomass carbon achieves a sheet-like morphology with macroscopically open structure after the hydrothermal activation of KOH. It is worth noting that the activated carbon exhibits a high reversible capacity (458.6 mAh g−1), an excellent rate capability (102.6 mAh g−1 at 10 A g−1) and a cycling stability (198.6 mAh g−1 at 0.2 A g−1 over 500 cycles). The enhanced electrochemical properties of the activated carbon can be attributed to the larger surface area and highly developed nanopores, which could significantly facilitate the transport and storage of sodium ions.
Similar content being viewed by others
References
Dunn B, Kamath H, Tarascon JM (2011) Electrical energy storage for the grid: a battery of choices. Science 334:928–935
Larcher D, Tarascon JM (2015) Towards greener and more sustainable batteries for electrical energy storage. Nat Chem 7:19–29
Goodenough JB, Park KS (2013) The Li-ion rechargeable battery: a perspective. J Am Chem Soc 135:1167–1176
Scrosati B, Hassoun J, Sun YK (2011) Lithium-ion batteries. A look into the future. Energy Environ Sci 4:3287–3295
Komaba S, Murata W, Ishikawa T et al (2011) Electrochemical Na insertion and solid electrolyte interphase for hard-carbon electrodes and application to Na-ion batteries. Adv Funct Mater 21:3859–3867
Yabuuchi N, Kubota K, Dahbi M, Komaba S (2014) Research development on sodium-ion batteries. Chem Rev 114:11636–11682
Pan HL, Hu YS, Chen LQ (2013) Room-temperature stationary sodium-ion batteries for large-scale electric energy storage. Energy Environ Sci 6:2338–2360
Ren WH, Zhu ZX, An QY, Mai LQ (2017) Emerging prototype sodium-ion full cells with nanostructured electrode materials. Small 13:1604181
Yuan DD, Liang XM, Wu L, Cao YL, Ai XP, Feng JW, Yang HX (2014) A honeycomb-layered Na3Ni2SbO6: a high-rate and cycle-stable cathode for sodium-ion batteries. Adv Mater 26:6301–6306
Wang YS, Xiao RJ, Hu YS, Avdeev M, Chen LQ (2015) P2-Na0.6[Cr0.6Ti0.4]O2 cation-disordered electrode for high-rate symmetric rechargeable sodium-ion batteries. Nat Commun 6:6954
Xu SY, Wang YS, Ben LB et al (2015) Fe-based tunnel-type Na0.61[Mn0.27Fe0.34Ti0.39]O2 designed by a new strategy as a cathode material for sodium-ion batteries. Adv Energy Mater 5:1501156
Fang YJ, Xiao LF, Ai XP, Cao YL, Yang HX (2015) Hierarchical carbon framework wrapped Na3V2(PO4)3 as a superior high-rate and extended lifespan cathode for sodium-ion batteries. Adv Mater 27:5895–5900
Barpanda P, Oyama G, Nishimura S, Chung SC, Yamada A (2014) A 3.8-V earth-abundant sodium battery electrode. Nat Commun 5:4358
Li C, Miao X, Chu W, Wua P, Tong DG (2015) Hollow amorphous NaFePO4 nanospheres as a high-capacity and high-rate cathode for sodium-ion batteries. J Mater Chem A 3:8265–8271
Qi YR, Mu LQ, Zhao JM, Hu YS, Liu HZ, Dai S (2015) Superior Na-storage performance of low-temperature-synthesized Na3(VO1−xPO4)2F1+2x (0 ≤ x ≤ 1) nanoparticles for Na-ion batteries. Angew Chem 54:9911–9916
Cao YL, Xiao LF, Sushko ML et al (2012) Sodium ion insertion in hollow carbon nanowires for battery applications. Nano Lett 12:3783–3787
Song JX, Yu ZX, Gordin ML, Li XL, Peng HS, Wang DH (2015) Advanced sodium ion battery anode constructed via chemical bonding between phosphorus, carbon nanotube, and cross-linked polymer binder. ACS Nano 9:11933–11941
Wang HG, Wu Z, Meng FL, Ma DL, Huang XL, Wang LM, Zhang XB (2013) Nitrogen-doped porous carbon nanosheets as low-cost, high-performance anode material for sodium-ion batteries. Chemsuschem 6:56–60
Qie L, Chen WM, Wang ZH et al (2012) Nitrogen-doped porous carbon nanofiber webs as anodes for lithium ion batteries with a superhigh capacity and rate capability. Adv Mater 24:2047–2050
Wang XL, Li G, Hassan FM et al (2015) Sulfur covalently bonded graphene with large capacity and high rate for high-performance sodium-ion batteries anodes. Nano Energy 15:746–754
Tang K, Fu LJ, White RJ, Yu LH, Titirici MM, Antonietti M, Maier J (2012) Hollow carbon nanospheres with superior rate capability for sodium-based batteries. Adv Energy Mater 2:873–877
Sun Y, Zhao L, Pan HL et al (2013) Direct atomic-scale confirmation of three-phase storage mechanism in Li4Ti5O12 anodes for room-temperature sodium-ion batteries. Nat Commun 4:1870
Li G, Luo D, Wang XL, Seo MH, Hemmati S, Yu AP, Chen ZW (2017) Enhanced reversible sodium-ion intercalation by synergistic coupling of few-layered MoS2 and S-doped graphene. Adv Funct Mater 27:1702562
Zhu YJ, Wen Y, Fan XL (2015) Red phosphorus-single-walled carbon nanotube composite as a superior anode for sodium ion batteries. ACS Nano 9:3254–3264
Walter M, Doswald S, Kovalenko MV (2016) Inexpensive colloidal SnSb nanoalloys as efficient anode materials for lithium- and sodium-ion batteries. J Mater Chem A 4:7053–7059
Stevens DA, Dahn JR (2000) High capacity anode materials for rechargeable sodium-ion batteries. J Electrochem Soc 147:1271–1273
Xu YX, Lin ZY, Zhong X, Papandrea B, Huang Y, Duan XF (2015) Solvated graphene frameworks as high-performance anodes for lithium-ion batterie. Angew Chem 54:5435–5440
Li W, Zhou M, Li HM, Wang KL, Cheng SJ, Jiang K (2015) A high performance sulfur-doped disordered carbon anode for sodium ion batteries. Energy Environ Sci 8:2916–2921
Qie L, Chen WM, Xiong XQ, Hu CC, Zou F, Hu P, Huang YH (2015) Sulfur-doped carbon with enlarged interlayer distance as a high-performance anode material for sodium-ion batteries. Adv Sci 2:1500195
Xu JT, Wang M, Wickramaratne NP, Jaroniec M, Dou SX, Dai LM (2015) High-performance sodium ion batteries based on a 3D anode from nitrogen-doped graphene foams. Adv Mater 27:2042–2048
Xu DF, Chen CJ, Xie J et al (2016) A hierarchical N/S-codoped carbon anode fabricated facilely from cellulose/polyaniline microspheres for high-performance sodium-ion batteries. Adv Energy Mater 6:1501929
Yang JQ, Zhou XL, Wu DH, Zhao XD, Zhou Z (2017) S-doped N-rich carbon nanosheets with expanded interlayer distance as anode materials for sodium-ion batteries. Adv Mater 29:1604108–1604112
Jo C, Park Y, Jeong J, Lee KT, Lee J (2015) Structural effect on electrochemical performance of ordered porous carbon electrodes for Na-ion batteries. ACS Appl Mater Interfaces 7:11748–11754
Hou HS, Banks CE, Jing MJ, Zhang Y, Ji XB (2016) Carbon quantum dots and their derivative 3D porous carbon frameworks for sodium-ion batteries with ultralong cycle life. Adv Mater 27:7861–7866
Wang L, Yang CL, Dou S et al (2016) Nitrogen-doped hierarchically porous carbon networks: synthesis and applications in lithium-ion battery, sodium-ion battery and zinc-air battery. Electrochim Acta 219:592–603
Zou GQ, Jia XN, Huang ZD et al (2016) Cube-shaped porous carbon derived from MOF-5 as advanced material for sodium-ion batteries. Electrochim Acta 196:413–421
Wang S, Xia L, Yu L, Zhang L, Wang H, Lou XW (2016) Free-standing nitrogen-doped carbon nanofiber films: integrated electrodes for sodium-ion batteries with ultralong cycle life and superior rate capability. Adv Energy Mater 6:1502217–1502223
Hong KL, Qie L, Zeng R et al (2014) Biomass derived hard carbon used as a high performance anode material for sodium ion batteries. J Mater Chem A 2:12733–12738
Liu P, Li YM, Hu YS, Li H, Chen LQ, Huang XJ (2016) A waste biomass derived hard carbon as high-performance anode material for sodium-ion batteries. J Mater Chem A 4:13046–13052
Gaddam RR, Yang DF, Narayan R, Raju KV, Kumar NA, Zhao XS (2016) Biomass derived carbon nanoparticle as anodes for high performance sodium and lithium ion batteries. Nano Energy 26:346–352
Lv WM, Wen FS, Xiang JY et al (2015) Peanut shell derived hard carbon as ultralong cycling anodes for lithium and sodium batteries. Electrochim Acta 176:533–541
Zhang F, Wang KX, Li GD, Chen JS (2009) Hierarchical porous carbon derived from rice straw for lithium ion batteries with high-rate performance. Electrochem Commun 11:130–133
Chen L, Zhang YZ, Lin CH et al (2014) Hierarchically porous nitrogen-rich carbon derived from wheat straw as an ultra-high-rate anode for lithium ion batteries. J Mater Chem A 2:9684–9690
Zhu YY, Chen MM, Li Q, Yuan C, Wang CY (2018) A porous biomass-derived anode for high-performance sodium-ion batteries. Carbon 129:695–701
Lu MJ, Yu WH, Shi J, Liu W, Chen SG, Wang X, Wang HL (2017) Self-doped carbon architectures with heteroatoms containing nitrogen, oxygen and sulfur as high-performance anodes for lithium- and sodium-ion batteries. Electrochim Acta 251:396–406
Hao R, Yang Y, Wang H et al (2018) Direct chitin conversion to N-doped amorphous carbon nanofibers for high-performing full sodium-ion batteries. Nano Energy 45:220–228
Qin DC, Liu ZY, Zhao YZ, Xu GY, Zhang F, Zhang XZ (2018) A sustainable route from corn stalks to N, P-dual doping carbon sheets toward high performance sodium-ion batteries anode. Carbon 130:664–671
Selvamani V, Ravikumar R, Suryanarayanan V, Velayutham D, Gopukumar S (2016) Garlic peel derived high capacity hierarchical N-doped porous carbon anode for sodium/lithium ion cell. Electrochim Acta 190:337–345
Zhang YC, You Y, Xin S et al (2016) Rice husk-derived hierarchical silicon/nitrogen-doped carbon/carbon nanotube spheres as low-cost and high-capacity anodes for lithium-ion batteries. Nano Energy 25:120–127
Niu J, Liang JJ, Shao R et al (2017) Tremella-like N, O-codoped hierarchically porous carbon nanosheets as high-performance anode materials for high energy and ultrafast Na-ion capacitors. Nano Energy 41:285–292
Kumar P, Barrett DM, Delwiche MJ, Stroeve P (2009) Methods for pretreatment of lignocellulosic biomass for efficient hydrolysis and biofuel production. Ind Eng Chem Res 48:3713–3729
Zhu YW, Murali S, Stoller MD et al (2011) Carbon-based supercapacitors produced by activation of grapheme. Science 332:1537–1541
Jiang J, Zhu JH, Ai W et al (2014) Evolution of disposable bamboo chopsticks into uniform carbon fibers: a smart strategy to fabricate sustainable anodes for Li-ion batteries. Energy Environ Sci 7:2670–2679
Wang ZH, Qie L, Yuan LX, Zhang WH, Hu XL, Huang YH (2013) Functionalized N-doped interconnected carbon nanofibers as an anode material for sodium-ion storage with excellent performance. Carbon 55:328–334
Zheng YH, Wang YS, Lu YX, Hu YS, Li J (2017) A high-performance sodium-ion battery enhanced by macadamia shell derived hard carbon anode. Nano Energy 39:489–498
Su CY, Xu YP, Zhang WJ, Zhao JW, Tang XH, Tsai CH, Li LJ (2009) Electrical and spectroscopic characterizations of ultra-Large reduced graphene oxide monolayers. Chem Mater 21:5674–5680
Li DD, Ding LX, Chen HB, Wang SQ, Li Z, Zhu M, Wang HH (2014) Novel nitrogen-rich porous carbon spheres as a high-performance anode material for lithium-ion batteries. J Mater Chem A 2:16617–16622
Xiao LF, Lu HY, Fang YJ et al (2018) Low-defect and low-porosity hard carbon with high coulombic efficiency and high capacity for practical sodium ion battery anode. Adv Energy Mater 8:1703238
Li Y, Zhao Y, Cheng HH, Hu Y, Shi GQ, Dai LM, Qu LT (2011) Nitrogen-doped graphene quantum dots with oxygen-rich functional groups. J Am Chem Soc 134:15–18
Fang Y, Luo B, Jia Y, Li X, Wang B, Song Q (2012) Renewing functionalized graphene as electrodes for high-performance supercapacitor. Adv Mater 24:6348–6355
Ding J, Wang HL, Li Z et al (2015) Peanut shell hybrid sodium ion capacitor with extreme energy–power rivals lithium ion capacitors. Energy Environ Sci 8:941–955
Shao YY, Xiao J, Wang W et al (2013) Surface-driven sodium ion energy storage in nanocellular carbon foams. Nano Lett 13:3909–3914
Peng H, Ma G, Sun K, Mu J, Lei Z (2014) One-step preparation of ultrathin nitrogen-doped carbon nanosheets with ultrahigh pore volume for high-performance supercapacitors. J Mater Chem A 2:17297–17301
Peng H, Ma GF, Sun KJ, Zhang ZG, Yang Q, Lei ZQ (2016) Nitrogen-doped interconnected carbon nanosheets from pomelo mesocarps for high performance supercapacitors. Electrochim Acta 190:862–871
Shen W, Wang C, Xu QJ, Liu HM, Wang YG (2014) Nitrogen-doping-induced defects of a carbon coating layer facilitate Na-storage in electrode materials. Adv Energy Mater 5:1400982
Ding J, Li Z, Cui K, Boyer S, Karpuzov D, Mitlin D (2016) Heteroatom enhanced sodium ion capacity and rate capability in a hydrogel derived carbon give record performance in a hybrid ion capacitor. Nano Energy 23:129–137
DatsyukV Kalyva M, Papagelis K et al (2008) Chemical oxidation of multiwalled carbon nanotubes. Carbon 46:833–840
Shao Y, Zhang S, Engelhard MH et al (2010) Nitrogen-doped graphene and its electrochemical applications. J Mater Chem 20:7491–7496
Sun N, Liu H, Xu B (2015) Facile synthesis of high performance hard carbon anode materials for sodium ion batteries. J Mater Chem A 3:20560–20566
Li YM, Hu YS, Titirici M, Chen LQ, Huang XJ (2016) Hard carbon microtubes made from renewable cotton as high-performance anode material for sodium-ion batteries. Adv Energy Mater 6:1600659
Luo XF, Yang CH, Peng YY, Pu NW, Ger MD, Hsieh CT, Chang JK (2015) Graphene nanosheets, carbon nanotubes, graphite, and activated carbon as anode materials for sodium-ion batteries. J Mater Chem A 3:10320–10326
Li DD, Chen HB, Liu GX, Wei M, Ding LX, Wang SQ, Wang HH (2015) Porous nitrogen doped carbon sphere as high performance anode of sodium-ion battery. Carbon 94:888–894
Qiu S, Xiao LF, Sushko ML et al (2017) Manipulating adsorption–insertion mechanisms in nanostructured carbon materials for high-efficiency sodium ion storage. Adv Energy Mater 7:1700403
Yan D, Yu CY, Zhang XZ et al (2016) Nitrogen-doped carbon microspheres derived from oatmeal as high capacity and superior long life anode material for sodium ion battery. Electrochim Acta 191:385–391
Fu LJ, Tang K, Song KP, van Aken PA, Yu Y, Maier J (2014) Nitrogen doped porous carbon fibres as anode materials for sodium ion batteries with excellent rate performance. Nanoscale 6:1384–1389
Wang PZ, Qiao B, Du YC, Li YF, Zhou XS, Dai ZH, Bao JC (2015) Fluorine-doped carbon particles derived from lotus petioles as high-performance anode materials for sodium-ion batteries. J Phys Chem C 119:21336–21344
Chen L, Wang Z, He C, Zhao N, Shi C, Liu E, Li J (2013) Porous graphitic carbon nanosheets as a high-rate anode material for lithium-ion batteries. ACS Appl Mater Interfaces 5:9537–9545
Niu J, Zhang S, Niu Y, Song HH, Chen XH, Zhou JS, Cao B (2015) Direct amination of Si nanoparticles for the preparation of Si @ ultrathin SiOx @ graphene nanosheets as high performance lithium-ion battery anodes. J Mater Chem A 3:19892–19900
Nakajima T, Gupta V, Ohzawa Y, Groult H, Mazej Z, Žemva B (2004) Influence of cointercalated HF on the electrochemical behavior of highly fluorinated graphite. J Power Sources 137:80–87
Xiao LF, Cao YL, Henderson WA et al (2016) Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries. Nano Energy 19:279–288
Wang QQ, Zhu XS, Liu YH, Fang YY, Zhou XS, Bao JC (2017) Rice husk-derived hard carbons as high-performance anode materials for sodium-ion batteries. Carbon 127:658–666
Yan D, Yu C, Zhang X, Li J, Li J, Lu T, Pan L (2017) Enhanced electrochemical performances of anatase TiO2 nanotubes by synergetic doping of Ni and N for sodium-ion batteries. Electrochim Acta 254:130–139
Hou HS, Banks CE, JingM Zhang Y, Ji XB (2015) Carbon quantum dots and their derivative 3D porous carbon frameworks for sodium-ion batteries with ultralong cycle life. Adv Mater 27:7861–7866
Acknowledgements
The authors gratefully acknowledge the financial support of this research by Key Research and Development Program of Shandong Province (No. 2018JMRH0302), Science and Technology Development Plan of Weifang (No. 2018GX064), Project of Shandong Province Higher Educational Science and Technology Program (No. 2018LS001) and Doctoral Fund Project of Weifang University of Science and Technology (No. 2017BS07).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
There is no conflict of interest.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Li, C., Li, J., Zhang, Y. et al. Heteroatom-doped hierarchically porous carbons derived from cucumber stem as high-performance anodes for sodium-ion batteries. J Mater Sci 54, 5641–5657 (2019). https://doi.org/10.1007/s10853-018-03229-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-018-03229-2