Abstract
This work examines the applicability of encapsulated 1-methyl-3-butylimidazolium hexafluorophosphate within a polyurea shell (BMIm[PF6]@polyurea) to act as microreactors by dissolving platinum acetylacetonate or cinchonine in the ionic liquid phase pre-emulsification. Their applicability was tested in hydrosilylation and Michael addition reactions, respectively. The capsules crack within the first catalytic cycle indicating a fragile shell is formed. In addition, the development of particulated BMIm[PF6] within polyurethane is described. These BMIm[PF6]@polyurethane capsules were characterized and analyzed using scanning electron microscopy, X-ray diffraction, solid-state NMR, infrared and thermal gravimetric analysis. Finally, their ability to act as microreactors in the Michael addition reaction was tested. The capsules morphology does not undergo any changes after the reaction.
Similar content being viewed by others
References
Can L, Yan L (eds) (2014) Bridging heterogeneous and homogeneous catalysis. Wiley-VCH, Weinheim
Leadbeater NE, Marco M (2002) Preparation of polymer-supported ligands and metal complexes for use in catalysis. Chem Rev 102:3217–3274
Lu J, Toy PH (2009) Organic polymer supports for synthesis and for reagent and catalyst immobilization. Chem Rev 109:815–838
Mason BP, Price KE, Steinbacher JL, Bogdan AR, McQuade DT (2007) Greener approaches to organic synthesis using microreactor technology. Chem Rev 107:2300–2318
McNamara CA, Dixon MJ, Bradley M (2002) Recoverable catalysts and reagents using recyclable polystyrene-based supports. Chem Rev 102:3275–3300
Zhao XS, Bao XY, Guo WP, Lee FY (2006) Immobilizing catalysts on porous materials. Mater Today 9:32–39
Kirschning A (ed) (2004) Immobilized catalysts: solid phase, immobilization and applications, vol 242. Springer, Heidelberg, Berlin
Kobayashi S, Nagayama SA (1998) Microencapsulated Lewis acid. A new type of polymer-supported Lewis acid catalyst of wide utility in organic synthesis. J Am Chem Soc 120:2985–2986
Akiyama R, Kobayashi S (2009) Microencapsulated and related catalysts for organic chemistry and organic synthesis. Chem Rev 109:594–642
Lensen D, Vriezema DM, van Hest JCM (2008) Polymeric microcapsules for synthetic applications. Macromol Biosci 8:991–1005
Longstreet AR, McQuade DT (2013) Organic reaction systems: using microcapsules and microreactors to perform chemical synthesis. Acc Chem Res 46:327–338
Mason BP, Bogdan AR, Goswami A, McQuade DT (2007) A general approach to creating soluble catalytic polymers heterogenized in microcapsules. Org Lett 9:3449–3451
Pitts MR (2008) Safer, faster and cleaner reactions using encapsulated metal catalysts and microwave heating performance enhancement of palladium, platinum and osmium catalysts. Platin Met Rev 52:64–70
Polenz I, Weitz DA, Baret JC (2015) Polyurea microcapsules in microfluidics: surfactant control of soft membranes. Langmuir 31:1127–1134
Price KE, Mason BP, Bogdan AR, Broadwater SJ, Steinbacher JL, McQuade DT (2006) Microencapsulated linear polymers: “soluble” heterogeneous catalysts. J Am Chem Soc 128:10376–10377
Stadler B, Price AD, Chandrawati R, Hosta-Rigau L, Zelikin AN, Caruso F (2009) Polymer hydrogel capsules: en route toward synthetic cellular systems. Nanoscale 1:68–73
Wang X, Feng J, Bai Y, Zhang Q, Yin Y (2016) Synthesis, properties, and applications of hollow micro-/nanostructures. Chem Rev 116:10983–11060
Risangud N, Congdon RT, Keddie JD, Wilson P, Kempe K, Haddleton MD (2016) Polyurea microcapsules from isocyanatoethyl methacrylate copolymers. J Polym Sci A Polym Chem 54:2698–2705
Zhang S, Zhang J, Zhang Y, Deng Y (2016) Nanoconfined Ionic liquids. Chem Rev. doi:10.1021/acs.chemrev.6b00509
Shen J, Xin X, Liu T, Wang S, Yang Y, Luan X, Xu G, Yuan S (2016) Ionic self-assembly of giant vesicles as a smart microcarrier and microreactor. Langmuir 32:9548–9556
Ramarao C, Ley SV, Smith SC, Shirley IM, DeAlmeida N (2002) Encapsulation of palladium in polyurea microcapsules. Chem Commun. doi:10.1039/B200674J
Ley SV, Ramarao C, Gordon RS, Holmes AB, Morrison AJ, McConvey IF, Shirley IM, Smith SC, Smith MD (2002) Polyurea-encapsulated palladium(II) acetate: a robust and recyclable catalyst for use in conventional and supercritical media. Chem Commun. doi:10.1039/B200677B
Baxendale IR, Griffiths-Jones CM, Ley SV, Tranmer GK (2006) Microwave-assisted Suzuki coupling reactions with an encapsulated palladium catalyst for batch and continuous-flow transformations. Chem Eur J 12:4407–4416
Bremeyer N, Ley SV, Ramarao C, Shirley IM, Smith SC (2002) Palladium acetate in polyurea microcapsules: a recoverable and reusable catalyst for hydrogenations. Synlett. doi:10.1055/s-2002-34862
Ley SV, Ramarao C, Lee AL, Ostergaard N, Smith SC, Shirley IM (2003) Microencapsulation of osmium tetroxide in polyurea. Org Lett 5:185–187
Yu JQ, Wu HC, Ramarao C, Spencer JB, Ley SV (2003) Transfer hydrogenation using recyclable polyurea-encapsulated palladium: efficient and chemoselective reduction of aryl ketones. Chem Commun. doi:10.1039/B300074P
Broadwater SJ, McQuade DT (2006) Investigating PdEnCat catalysis. J Org Chem 71:2131–2134
Richardson JM, Jones CW (2006) Poly(4-vinylpyridine) and quadrapure TU as selective poisons for soluble catalytic species in palladium-catalyzed coupling reactions–application to leaching from polymer-entrapped palladium. Adv Synth Catal 348:1207–1216
Toubiana J, Chidambaram M, Santo A, Sasson Y (2008) PdAlqEn: a novel upgraded version of the PdEnCat (TM) family of polyurea encapsulated catalysts. Adv Synth Catal 350:1230–1234
Weiss E, Gertopski D, Gupta MK, Abu-Reziq R (2015) Encapsulation of ionic liquid BMIm[PF6] within polyurea microspheres. React Funct Polym 96:32–38
Acknowledgements
Funding was provided by German-Israeli Foundation for Scientific Research and Development (Grant No. 2274-2193.5/2010).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Weiss, E., Abu-Reziq, R. Ionic liquid-based polymeric microreactors and their applicability. J Mater Sci 52, 10637–10647 (2017). https://doi.org/10.1007/s10853-017-1236-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-017-1236-x