Skip to main content
Log in

Corrosion and wear resistance of AZ91D magnesium alloy with and without microarc oxidation coating in Hank’s solution

  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Immersion test, electrochemistry test and block-on-cylinder type wear test have been applied to study the corrosion and wear resistance of AZ91D Mg alloy with and without microarc oxidation (MAO) treatment in Hank’s solution. Through MAO, a ceramic coating is directly formed on the surface of AZ91D Mg alloy, by which its corrosion and wear resistances are greatly improved. The immersion test results show the mass loss of untreated AZ91D Mg is 15 times of that of MAO ones after 21 days immersion test. The electrochemical corrosion experiments show that the corrosion potential of Mg alloy is improved from −1.5786 V to −0.43019 V through MAO surface treatment, the corrosion current is reduced from 0.028703 A/cm2 to 2.0456 × 10−7 A/cm2, and the polarization resistance is improved from 1.2753 × 10−5 Ω/cm2 to 0.90886 Ω/cm2. The lubricate sliding wear test results show the mass loss of untreated AZ91D Mg is 1.5 times of that of MAO ones.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Yo K (2001) Mater Tans 42(7):115

    Google Scholar 

  2. Liang J, Guo BG, Tian J et al (2005) Appl Surface Sci 252:345

    Article  CAS  Google Scholar 

  3. Witte F, Fischer J, Nellesen J, Crostack HA et al (2006) Biomaterials 27:1013

    Article  CAS  Google Scholar 

  4. Witte F, Fischer J, Nellesen J et al (2005) Biomaterials 26:3557

    Article  CAS  Google Scholar 

  5. Staiger MP, Pietaka AM, Huadmai J et al (2006) Biomaterials 27:1728

    Article  CAS  Google Scholar 

  6. Li LC, Gao JC, Wan Y (2004) Surface Coatings Technol 185: 92

    Article  CAS  Google Scholar 

  7. Zozulin AJ, Bartak DE (1994) Metal Finish 4:39

    Google Scholar 

  8. Wen CE, Yamada Y, Shimojima K et al (2004) Mater Lett 58: 357

    Article  CAS  Google Scholar 

  9. Heublein B, Rohde R, Kaese V (2003) Heart 89:651

    Article  CAS  Google Scholar 

  10. Inoue H, Sugahara K, Yamamoto A et al (2002) Corros Sci 44(3):603

    Article  CAS  Google Scholar 

  11. Wimmer MA, Loos J, Nassutt R et al (2001) Wear 250:129

    Article  Google Scholar 

  12. Gray JE, Luan B (2002) J Alloys Compd 336:88

    Article  CAS  Google Scholar 

  13. Zhang XP, Chen G (2005) Surface Rev Lett 12(2):279

    Article  CAS  Google Scholar 

  14. Xue WB, Wu XL, Li XJ et al (2006) J Alloys Compd 425:302

    Article  CAS  Google Scholar 

  15. Zhou WF (1985) Electrochemistry measure. Shanghai Science Technology Book Concern, Shanghai

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to X. P. Zhang.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Zhang, X.P., Zhao, Z.P., Wu, F.M. et al. Corrosion and wear resistance of AZ91D magnesium alloy with and without microarc oxidation coating in Hank’s solution. J Mater Sci 42, 8523–8528 (2007). https://doi.org/10.1007/s10853-007-1738-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-007-1738-z

Keywords

Navigation