Abstract
Fly-ash cenosphere particles were used as mixture in aluminum matrix composite by squeeze casting method [1]. The electromagnetic interfering shielding effectiveness (EMISE) was investigated in the frequency range from 0.03 MHz to 1.5 GHz. It showed the SE value of Al2024/cenospheres composite (ACC) is higher than that of aluminum alloy, and comparative to traditional material 1J50. Unlike 1J50, the mechanism of EMI shielding for ACC is reflection and multiple reflections. Analyzed by XRD and SEM, chemical reactions may occur between the matrix and cenosphere particles during the casting procedure, but it affects the shielding effectiveness little.
Similar content being viewed by others
References
Wu GH, People’s Republic of China, 94114284X (in Chinese)
Li Yunkai, Wang Yong et al (2002) J Chin Ceram Soc 30:664
Cao Jingyao, Chung DDL (2004) Cement Concrete Res 34:1889
Cardoso RJ, Shukla A (2002) J Mater Sci 37:603
Shukla S, Seal S, Akessona J et al (2001) Appl Surf Sci 181:35
Chung DDL (2001) Carbon 39:279
Guo RQ, Rohatgi PK (1998) Metall Mater Trans B: Process Metall Mater Process Sci 29:519
Ye Dalun (1981) Handbook of mineral thermodynamics. Metallurgy publishing company
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wu, G., Huang, X., Dou, Z. et al. Electromagnetic interfering shielding of aluminum alloy–cenospheres composite. J Mater Sci 42, 2633–2636 (2007). https://doi.org/10.1007/s10853-006-1347-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-1347-2