Abstract
Air atmosphere sinterable La0.8Sr0.2CrO3 [LSC] and La0.7Ca0.3CrO3 [LCC] powders have been prepared by sucrose combustion synthesis. Aqueous solution containing stoichiometric quantities of the metal nitrates and sucrose (3 moles/mole of the metal ion) at pH ∼1 was concentrated by heating on a hot plate into a viscous resin which on drying at 120°C produced a foam with interconnected pore structure. This foam ignited with a matchstick in a combustion set up fabricated in the laboratory produced ashes consisting of loose aggregates of LSC and LCC particles. The loose aggregate of LSC and LCC were powdered by planetary ball milling to submicron size particles with D50 value 0.19 and 0.60 μm, respectively. The surface area of the LSC and LCC powders was 23 and 19 m2/g, respectively. Pellets prepared by cold compaction and sintering of LSC and LCC powders in air atmosphere showed density 96.8 and 98.8% of theoretical value respectively. Sintered LCC sample showed finer grains compared to the LSC sample under identical processing conditions.
Similar content being viewed by others
References
Minh NQ (1993) J Am Ceram Soc 76:563
Steele BCH (2001) J Mater Sci 36:1053
Steele BCH (1992) Mater Sci Eng 1313:79
Chick LA, Liu J, Stevenson JW, Armstrong TR, Mc Cready DE, Maupin GD, Coffey GW, Coyle CA (1997) J Am Ceram Soc 80:2109
Groupp L, Anderson HU (1976) J Am Ceram Soc 59:447
Sakai N, Kavada T, Yokokawa H, Dokiya M (1990) J Mayter Sci 25:4531
Christie GM, Middleton PH, Steele BCH (1993) In Singhal SC, Iwahara H (eds) Proceedings of the 3rd international symposium on solid oxide fuel cells. The Electrochem. Soc., Pennington, NJ, p 315
Christiansen N, Gordes P, Alstrup NC, Mogensen G (1993) In Singhal SC, Iwahara H (eds) Proceedings of the 3rd international symposium on solid oxide fuel cells. The Electrochem. Soc., Pennington, NJ, p 401
Yokokawa H, Sasaki N, Kawada T, Dokiya M (1991) J Electrochem Soc 138:1018
Takeuchi T, Takeda Y, Funahashi R, Aihara T, Tahuchi M, Kageyama H (2000) J Electrochem Soc 147:3979
Christie GM, Middlton PH, Steele BCH (1994) J Euro Ceram Soc 14:163
Deshpande K, Mukasyan A, Varama A (2003) J Am Ceram Soc 86:1149
Weber WJ, Griffin CW, Bates JL (1987) J Am Ceram Soc 70:265
Eror NG, Anderson HU (1989) Mater Res Soc Symp Proc 73:571
Ovenstone J, Ponton CB (2000) J Mater Sci 35:4115
Vernoux P, Djurado E, Guillodo M (2001) J Am Ceram Soc 84:2289
Das RN, Bandyopadhyay A, Bose A (2001) J Am Ceram Soc 84:2421
Mitchell LD, Whitfield PS, Margeson J, Beaudoin JJ (2002) J Mater Sci Lett 21:1773
Ganesh I, Srinivas B, Johnson R, Saha BP, Mahajan YR (2001) Brit Ceram Trans 101:247
Bose S, Banerjee A (2004) J Am Ceram Soc 87:487
Prabhakaran K, Gokhale NM, Sharma SC, Lal R (2005) Ceram Int 31:327
Acknowledgement
The authors thank Dr. J. Narayana Das, Director, Naval Materials Research Laboratory for his encouragement and keen interest in this work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Prabhakaran, K., Lakra, J., Beigh, M.O. et al. Sinterable La0.8Sr0.2CrO3 and La0.7Ca0.3CrO3 powders by sucrose combustion synthesis. J Mater Sci 41, 6300–6304 (2006). https://doi.org/10.1007/s10853-006-0336-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-0336-9