References
F. C. MONKMAN and N. J. GRANT, in Proceedings of American Society for Testing of Materials (ASTM), Philadelphia 56 (1956) 593.
A. C. F. COCKS and M. F. ASHBY, Prog. Mater. Sci. 27 (1982) 189.
C. PHANIRAJ, M. NANDAGOPAL, S. L. MANNAN and P. RODRIGUEZ, Acta Metall. Mater. 39 (1991) 1651.
C. PHANIRAJ, M. NANDAGOPAL, S. L. MANNAN, P. RODRIGUEZ and B. P. KASHYAP, Acta Mater. 44 (1996) 4059.
B. K. CHOUDHARY, C. PHANIRAJ, M. NANDAGOPAL and S. L. MANNAN, Key Eng. Mater. 171–174 (2000) 437.
Idem., ISIJ Inter. Suppl.41 (2001) S73.
L. M. KACHANOV, Izv. Akad. Nauk. USSR, Otd Tekd Nauk. 8 (1958) 26.
Y. N. RABOTNOV, in “Creep Problems in Structural Members” (North Holland, Amsterdam, 1969).
M. PRAGER, J. Press. Vessel Technol., Trans. ASME 117 (1995) 95.
F. A. LECKIE and D. R. HAYHURST, Acta Metall. 25 (1977) 1059.
M. F. ASHBY and B. F. DYSON, “Advances in Fracture Research”, edited by S. R. Valluri et al. (Pergamon Press, Oxford, 1984), Vol. 1, p. 3.
B. F. DYSON and T. B. GIBBONS, Acta Metall. 35 (1987) 2355.
P. W. DAVIS and K. R. WILLIAMS, ibid. 17 (1969) 897.
G. A. WEBSTER, A. P. D. COX and J. E. DORN, Metal Sci. J. 3 (1969) 221.
C. PHANIRAJ, B. K. CHOUDHARY, K. BHANU SANKARA RAO and BALDEV RAJ, Scripta Mater. 48 (2003) 1313.
F. A. LECKIE and D. R. HAYHURST, Proc. Roy. Soc. London Ser. A. 340A (1974) 323.
B. K. CHOUDHARY, S. SAROJA, K. BHANU SANKARA RAO and S. L. MANNAN, Metall. Mater. Trans. A 30 (1999) 2825.
J. B. CONWAY and P. N. FLAGELLA, in “Creep-Rupture Data for the Refractory Metals to High Temperatures” (Gordon and Breach, New York, 1971).
J. D. PARKER and B. WILSHIRE, Mater. Sci. Eng. 43 (1980) 271.
R. R. HOUGH and R. ROLLS, Metal Sci. J. 5 (1971) 206.
A. G. ROBERTSON, D. S. WILKINSON and C. H. CACERES, J. Amer. Ceram. Soc. 74 (1991) 915.
T. TANAKA et al., in “Fracture Mechanics of Ceramics—Fracture Fundamentals, High Temperature Deformation, Damage, and Design”, edited by R. C. Bradt et al. (Plenum Press, New York, 1992), Vol. 10, p. 473.
J. D. FRENCH, S. M. WEIDERHORN and J. J. PETROVIC, in “High Temperature Silicides and Refractory Alloys”, Material Research Society Symposium, edited by C. L. Briant et al. (Materials Research Society, Pittsburgh, 1994), Vol. 322, p. 203.
ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and Section III, Division 1, Subsection NH (Class I Components in Elevated Temperatures Service), 2001.
D. A. WOODFORD, in “Materials Selection and Design”, ASM Handbook (ASM International, 1997), Vol. 20, p. 573.
R. VISWANATHAN, in “Damage Mechanisms and Life Assessment of High Temperature Components” (ASM, Metals Park, 1989).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Phaniraj, C., Choudhary, B.K., Raj, B. et al. A critical damage criterion for creeping solids. J Mater Sci 40, 2561–2564 (2005). https://doi.org/10.1007/s10853-005-2074-9
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10853-005-2074-9