Reference
C. HEMAMBAR, B. S. RAO and V. JAYARAM, Mater. Manuf. Processes 16 (2001) 779.
R. F. JEFFRIES and D. J. BURROWS, Gec. J. Res. 3 (1994) 150.
K. HANADA, K. A. KHOR and M. J. TAN, J. Mater. Process. Technol. 67 (1997) 8.
G. TIMMERMANS and L. FROYEN, Wear 230 (1999) 105.
B. K. HWU, S. J. LIN and M. T. JAHN, Mater. Sci. Eng. A207 (1996) 135.
Y. H. QING,Light Metals 7 (2003) 49.
Q. ZHANG, D. L. SUN and G. H. WU, Mater. Sci. Technol. 8 (2000) 66.
Q. ZHANG,Microelec. Technol. 27 (1999) 30.
Z. C. LIU, Z. F. WANG and G. S. JIANG, Ordnance Mater. Sci. Eng. 24 (2001) 51.
Q. HUANG and M. Y. GU, Elec. Pack. 10 (2003) 23.
H. S. LEE and S. H. HONG, Mater. Sci. Technol. 19 (2003) 1057.
J. Z. FAN, Mater. Eng. (1997) 42.
D. M. ZHNG, J. Mater. Sci. Technol. 19 (2003) 3.
Y. L. WANG, Composites. 30 (1997) 507.
H. S. LEE and S. H. HONG, Mater. Sci. Technol. 19 (2003) 1063.
G. H. WU and Q. ZHANG, Elec. Mater. 6 (2003) 28.
Q. HUANG, J. Mater. 9 (2000) 29.
Acknowledgment
This work was financially supported by National Natural Science Foundation of China (50232020).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
YANG, M.J., ZHANG, D.M., GU, X.F. et al. Fabrication and properties of SiCp/Al composites by pulsed electric current sintering. J Mater Sci 40, 5029–5031 (2005). https://doi.org/10.1007/s10853-005-1814-1
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10853-005-1814-1