Abstract
An important body of research has developed in recent years, explaining ways in which product materials influence user experiences. A priority now is to ensure that the research findings are adopted within an educational context to deliver contemporary curricula for students studying the subject of materials and design. This paper reports on an international initiative to develop ‘materials experience’ as a formal subject of study, complementary to traditional technical and engineering approaches to materials and design education. General learning objectives for materials experience are established, followed by specific attention to three kinds of experience that arise during user–material–product interaction: gratification of senses, conveyance of meanings, and elicitation of emotions. For each of these kinds of experience, a specially devised active learning exercise is explained in detail. In combination, these exercises are argued to deliver a good foundation for student appreciation and action on designing for material experiences in product design. The paper concludes with recommendations for how to responsibly redress the imbalance that exists in materials and design education, by transitioning from a culture of ‘imparting knowledge about materials’ to a culture of ‘generating experience with materials’.
Similar content being viewed by others
Notes
After conducting a number of studies, Karana (2009) grouped a set of sensorial properties under different sensory modalities. These properties (such as rough–smooth, opaque–transparent, soft–hard, etc.) together form a ‘scale’ and are promoted as the properties that are more commonly used for attributing meanings to materials.
References
Akın, F., & Pedgley, O. (2015). Sample libraries to expedite materials experience for design: A survey of global provision. Materials and Design,. doi:10.1016/j.matdes.2015.04.045.
Ashby, M. (2010). Materials selection in mechanical design (4th ed.). Oxford: Butterworth-Heinmann.
Ashby, M., & Johnson, K. (2002). Materials and design: The art and science of materials selection in product design. Oxford: Butterworth-Heinmann.
Ashby, M., Shercliff, H., & Cebon, D. (2013). Materials: Engineering, science, processing and design. Oxford: Butterworth-Heinmann.
Felder R., & Brent, R. (2009). Active learning: An introduction. ASQ Higher Education Brief, 2(4).
Budinski, K., & Budinski, M. (2009). Engineering materials, properties and selection. London: Prentice-Hall.
Dent, A., & Sherr, L. (2014). Material innovation: Product design. London: Thames & Hudson.
Granta Design. (2014). CES Edupack 2014. http://www.grantadesign.com/education/edupack/edupack2014.htm. Accessed 20 June 2014.
Hassenzahl, M. (2010). Experience design: Technology for all the right reasons. San Francisco: Morgan & Claypool.
Howes, P., & Laughlin, Z. (2012). Material matters: New materials in design. London: Black Dog Publishing.
Itten, J. (1963). Design and form. New York: Van Nostrand Reinhold.
Jee, D., & Kang, K. (2001). A method for optimal material selection aided with decision making theory. Materials and Design, 21(3), 199–206.
Karana, E. (2009). Meanings of materials. Ph.D. thesis, Faculty of Industrial Design Engineering, Delft University of Technology.
Karana, E. (2011). Materials selection in design: From research to education. 1st International symposium for design education researchers. Cumulus Association/DRS, Paris.
Karana, E. (2012). Characterization of ‘natural’ and ‘high-quality’ materials to improve perception of bio-plastics. Journal of Cleaner Production, 37, 316–325.
Karana, E, Barati, B., Rognoli, V, Zeeuw van der Laan, A. (in press). Material driven design (MDD): A method to design for material experiences. International Journal of Design.
Karana, E., Hekkert, P., & Kandachar, P. (2010). A tool for meaning driven materials selection. Materials and Design, 31, 2932–2941.
Karana, E., Pedgley, O., & Rognoli, V. (2014). Materials experience: Fundamentals of materials and design. Oxford: Butterworth-Heinemann.
Karana, E., Pedgley, O., & Rognoli, V. (2015). On materials experience. Design Issues, 31(3), 16–27.
Krippendorff, K. (2006). The semantic turn: A new foundation for design. Boca Raton: Taylor and Francis CRC Press.
Le Breton, D. (2006). La saveur du monde - une anthropologie des sens. Paris: Éditions Métailié.
Lefteri, C. (2014). Materials for design. London: Laurence King.
McDonagh-Philp, D., & Lebbon, C. (2000). The emotional domain in product design. The Design Journal, 3(3), 31–43.
Miodownik, M. (2007). Toward designing new sensoaesthetic materials. Pure and Applied Chemistry, 79(10), 1635–1641.
Pedgley, O. (1999). Industrial designers’ attention to materials and manufacturing processes: Analyses at macroscopic and microscopic levels. Ph.D. thesis, Department of Design and Technology, Loughborough University.
Pedgley, O. (2009). Influence of stakeholders on industrial design materials and manufacturing selection. International Journal of Design, 3(1), 1–15.
Pedgley, O. (2010). Special file: Futures for materials and industrial design education. METU Journal of The Faculty of Architecture, 27(2), 265–269.
Pedgley, O. (2014). Materials selection for product experience: New thinking, new tools. In E. Karana, O. Pedgley, & V. Rognoli (Eds.), Materials experience: Fundamentals of materials and design (pp. 337–349). Oxford: Butterworth-Heinmann.
Rognoli, V. (2004). The expressive-sensorial characterization of materials for design. Ph.D. thesis, Faculty of Design, Politecnico di Milano.
Rognoli, V. (2010). A broad survey on expressive-sensorial characterization of materials for design education. METU Journal of The Faculty of Architecture, 27(2), 287–300.
Rognoli V., & Levi M. (2004). How, what and where is it possible to learn design materials? The Changing Face of Design Education. 2–3 September, Delft, 1–8. ISBN/ISSN:90-5155-020.
Sapuan, S. (2010). A knowledge-based system for materials selection in mechanical engineering design. Materials and Design, 22(8), 687–695.
Schifferstein, H., & Wastiels, L. (2014). Sensing materials: Exploring the building blocks for experiential design. In E. Karana, O. Pedgley, & V. Rognoli (Eds.), Materials experience: Fundamentals of materials and design (pp. 15–26). Oxford: Butterworth-Heinmann.
Trimingham, R. (2008). The role of values in design decision-making in design and technology education. Design and Technology Education: An International Journal, 13(2), 37–52.
University of Liverpool. (2014). CORE-materials. http://core.materials.ac.uk. Accessed 15 May 2014.
van Kesteren, I. (2008). Selecting materials in product design. Ph.D. thesis, Faculty of Industrial Design Engineering, Delft University of Technology.
Wick, R. (2000). Teaching at the Bauhaus. Ostfildern-Ruit: Hatje Cantz.
Wilkes, S., Wongsriruksa, S., Howes, P., Gamester, R., Witchel, H., Conreen, M., et al. (2015). Design tools for interdisciplinary translation of material experiences. Materials and Design,. doi:10.1016/j.matdes.2015.04.013.
Zeeuw van der Laan, A. (2013). Characterization of waste coffee grounds as a design material. MSc thesis, Faculty of Industrial Design Engineering, Delft University of Technology.
Acknowledgments
The authors would like to extend their gratitude to Bahar Sener-Pedgley for her meticulous preparation of several figures appearing in this paper.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pedgley, O., Rognoli, V. & Karana, E. Materials experience as a foundation for materials and design education. Int J Technol Des Educ 26, 613–630 (2016). https://doi.org/10.1007/s10798-015-9327-y
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10798-015-9327-y