Abstract
The surface tension and density of three liquid AlTi-based alloys (AlTiV, AlTiNb, and AlTiTa) have been measured using electromagnetic levitation as a tool for containerless processing. Surface tension has been determined by the oscillating-drop method, while the density was measured using a shadowgraph technique. Both quantities were determined over a wide temperature range, including the undercooled regime. In addition, sessile-drop and pendant-drop experiments to determine the surface tension were performed in a recently built high-temperature furnace. The measured data were compared to thermodynamic calculations using phenomenological models and the Butler equation. Generally, good agreement was found.
Similar content being viewed by others
References
Ti-2007 Science and Technology, Proceedings of the 11th World Conference on Titanium, Kyoto, Japan, 2007, ed. by M. Niinomi, S. Akiyama, M. Hagiwara, M. Ikeda, K. Maruyama (The Japan Institute of Metals, Sendai, 2007)
Long M., Rack H.J.: Biomaterials 19, 1621 (1998)
D. Jarvis, Mater. World 11 (2005)
Brillo J., Egry I.: Int. J. Thermophys. 24, 1155 (2003)
R. Harding, R. Brooks, G. Pottlacher, J. Brillo, in Gamma Titanium Aluminides, ed. by Y. Kim, H. Clemens, A. Rosenberger (TMS, Warrendale, PA, 2003), p. 75
Herlach D.M., Cochrane R.F., Egry I., Fecht H.J., Greer A.L.: Int. Mater. Rev. 38, 273 (1993)
Cummings D.L., Blackburn D.A.: J. Fluid Mech. 224, 395 (1991)
Sauerland S., Eckler K., Egry I.: J. Mater. Sci. 11, 330 (1992)
Schneider S., Egry I., Seyhan I.: Int. J. Thermophys. 23, 1241 (2002)
Naidich Yu.V.: Prog. Surf. Membr. Sci. 14, 353 (1981)
Garandet J.P., Vinet B., Gros P.: J. Colloid Interf. Sci. 165, 351 (1994)
Kohler F.: Monatsch. Chem. 91, 738 (1960)
Toop G.W.: Trans. AIME 233, 450 (1965)
Chou K.-C.: Calphad 19, 313 (1995)
Butler J.A.V.: Proc. R. Soc. A 135, 348 (1932)
Singh R.N.: Can. J. Phys. 65, 309 (1987)
Singh R.N., Sommer F.: Rep. Prog. Phys. 60, 57 (1997)
Speiser R., Poirier D.R., Yeum K.: Scr. Metall. 21, 687 (1987)
T. Tanaka, K. Hack, S. Hara, MRS Bull. April, 45 (1999)
Egry I., Brillo J., Matsushita T.: Mater. Sci. Eng. A 413–414, 460 (2005)
Novakovic R., Ricci E., Giuranno D., Passerone A.: Surf. Sci. 576, 175 (2005)
N. Saunders COST 507, Thermochemical Database for Light Metal Alloys, ed. by I. Ansara, A.T. Dinsdale, M.H. Rand, vol. 2 (European Union, Luxembourg, 1998)
Witusiewicz V.T., Bondar A.A., Hecht U., Rex S., Ya Velikanova T.: J. Alloys Compd. 465, 64 (2008)
Iida T., Guthrie R.I.L.: The Physical Properties of Liquid Metals. Clarendon Press, Oxford (1993)
Lang G., Laty P., Joud J.C., Desré P.: Z. Metall. 68, 113 (1977)
Ishikawa T., Paradis P.-F., Itami T., Yoda S.: J. Chem. Phys. 118, 7912 (2003)
Vinet B., Magnusson L., Fredriksson H., Desré P.J.: J. Colloid Interf. Sci. 255, 363 (2002)
Paradis P.-F., Ishikawa T., Yoda S.: J. Appl. Phys. 97, 053506 (2005)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Egry, I., Holland-Moritz, D., Novakovic, R. et al. Thermophysical Properties of Liquid AlTi-Based Alloys. Int J Thermophys 31, 949–965 (2010). https://doi.org/10.1007/s10765-010-0704-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10765-010-0704-1