Abstract
At the Italian National Research Institute of Metrology, the activities and studies concerning gas-controlled heat pipes are constantly increasing in terms of involved personnel, instrumentation, and devices available. In the last two years, among the other activities, a totally new gas-controlled heat pipe operating with mercury as the working fluid has been designed, manufactured, and completely characterized. This heat pipe is made of stainless steel and provided with three thermometer wells. A dedicated furnace has been constructed and specific software algorithms have been implemented for the temperature and pressure control. This device will be used as a low-temperature reference for the new “Temperature Amplifier” and as a calibration facility for thermometers calibrated by comparison between 220°C and 450°C. All details regarding this heat pipe, including the assembly, filling, and testing procedures, and the complete characterization campaign are summarized here. Results in terms of temperature stability, uniformity, and time response are reported, and demonstrate the capabilities of this gas-controlled heat pipe to be a useful device for research and applications in contact thermometry. Another gas-controlled heat pipe operating with mercury and provided with six thermometer wells has been manufactured, and will be characterized for the contact thermometry calibration laboratory at INRiM and for other calibration companies in Italy; this device is also presented.
Similar content being viewed by others
References
Crovini, L., Marcarino, P.: High Temp.-High Press. 23, 231 (1991)
Marcarino, P., Merlone, A.: Appl. Therm. Eng. 23, 1145 (2003)
P. Marcarino, A. Merlone, G. Coggiola, A. Tiziani, in Proceedings of TEMPMEKO ’99, 7th International Symposium on Temperature and Thermal Measurements in Industry and Science, ed. by J.F. Dubbeldam, M.J. de Groot (Edauw Johannissen BV, Delft, 1999), pp. 298–303
P. Marcarino, A. Merlone, R. Dematteis, in Proceedings of TEMPMEKO 2001, 8th International Symposium on Temperature and Thermal Measurements in Industry and Science, ed. by B. Fellmuth, J. Seidel, G. Scholz (VDE Verlag, Berlin, 2002), pp. 641–646
P. Marcarino, C. Bassani, in Temperature, Its Measurement and Control in Science and Industry, vol. 6, ed. by J.F. Schooley (AIP, New York, 1992), pp. 209–214
M. Sadli, E. Renaot, M. Elgourdou, G. Bonnier, in Proceedings of TEMPMEKO ’96, 6th International Symposium on Temperature and Thermal Measurements in Industry and Science, ed. by P. Marcarino (Levrotto and Bella, Torino, 1997), pp. 49–54
Hill, K.D., Gotoh, M.: Metrologia 33, 49 (1996)
A. Merlone, P. Marcarino, R. Dematteis, C. Bassani, in Proceedings of TEMPMEKO 2004, 9th International Symposium on Temperature and Thermal Measurements in Industry and Science, vol. 1, ed. by D. Zvizdic (LPM/FSB, Zagreb, Croatia, 2005), pp. 415–419
S. Giunta, A. Merlone, S. Marenco, P. Marcarino, A. Tiziani, Capabilities of a new pressure controller for gas-controlled heat pipe, in Proceedings of TEMPMEKO 2007 (to be published in Int. J. Thermophys.)
C.A. Busse, J.P. Labrande, C. Bassani, in Temperature Measurement 1975, Conference Series No. 26, ed. by B.F. Billing, T.J. Quinn (Institute of Physics, London, 1975), pp. 428–438
McAllan, J.V., Bassani, C.: Heat Mass Transfer 19, 67 (1985)
Marcarino, P., Merlone, A.: Metrologia 39, 395 (2002)
A. Merlone, in Proceedings of TEMPMEKO 2007, Int. J. Thermophys., doi:10.1007/s10765-008-0430-0
A. Merlone, J. Zhang, P. Marcarino, S. Giunta, X. Yan, J. Sun, INRiM and NIM cooperation agreement on the temperature amplifier, in Proceedings of TEMPMEKO 2007 (to be published in Int. J. Thermophys.)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Merlone, A., Giunta, S. & Tiziani, A. A New Mercury Gas-Controlled Heat Pipe for Temperature Amplifier and as Calibration Facility. Int J Thermophys 29, 1876–1886 (2008). https://doi.org/10.1007/s10765-008-0425-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10765-008-0425-x