Abstract
With an increased emphasis on science, technology, engineering, and mathematics (STEM) education, educators have often adopted engineering projects for integrating interdisciplinary knowledge through engineering design process. However, there is scant research that has empirically documented the relationships among students’ understanding of the knowledge and their characteristics on the design product. This study uses structural equation modeling to examine the influence of students’ scientific knowledge, design process, and critical thinking on their design product of the engineering project. A theoretical model was constructed to identify the factors that affected the design product. Study data were collected from 613 high school students, aged 16–17 years, regarding their scientific knowledge, design processes, and critical thinking. The results showed that design process played a mediating role in the effects of knowledge and critical thinking on the final design product. Students who could deduce, explain, and evaluate had an increased ability to apply scientific knowledge during the design process. These results indicate that scientific knowledge has an effect on the process and products of engineering projects completed by high school students. This study also suggested that the science and technology education community should consider offering high school students learning opportunities to promote their cognitive skills and facilitate connections between knowledge and practice.
Similar content being viewed by others
References
Ahern, A., O’Connor, T., McRuairc, G., McNamara, M., & O'Donnell, D. (2012). Critical thinking in the university curriculum – The impact on engineering education. European Journal of Engineering Education, 37(2), 125–132.
Allen, R. R., & Rott, R. K. (1969). The nature of critical thinking. report from the concepts in verbal argument project. Theoretical Paper No. 20.Retrieved from https://files.eric.ed.gov/fulltext/ED036861.pdf. Accessed 13 Dec 2018.
Anderson, J. C., & Gerbing, D. W. (1988). Structural equation modeling in practice: A review and recommended two-step approach. Psychological Bulletin, 103(3), 411–423.
Anwari, I., Yamada, S., Unno, M., Saito, T., Suwarma, I. R., Mutakinati, L., & Kumano, Y. (2015). Implementation of authentic learning and assessment through STEM education approach to improve students’ metacognitive skills. K-12 STEM Education, 1(3), 123–136.
Atman, C. J., Adams, R. S., Cardella, M. E., Turns, J., Mosborg, S., & Saleem, J. (2007). Engineering design processes: A comparison of students and expert practitioners. Journal of Engineering Education, 96(4), 359–379.
Bagozzi, R. P., & Yi, Y. (1988). On the evaluation of structural equation models. Academic of Marketing Science, 16(1), 76–94. https://doi.org/10.1177/009207038801600107.
Baker D., Ganesh, A., Ganesh, T. G., Krause, S., Morrell, D., Roberts, C., & White-Taylor J. (2014). Engineering: an introduction for high school. Retrieved from https://www.ck12.org/book/Engineering:-An-Introduction-for-High-School/. Accessed 13 Dec 2018.
Bentler, P. (1990). Comparative fit indices in structural models. Psychological Bulletin, 107(2), 238–246. https://doi.org/10.1037/0033-2909.107.2.238.
Bermingham, M. (2015). Clearing up “critical thinking”: Its four formidable features. Creative Education, 6, 421–427. https://doi.org/10.4236/ce.2015.64042.
Bollen, K. A. (1989). Structural equations with latent variables. New York, NY: Wiley.
Bybee, R. (2011). Scientific and engineering practices in K–12 classrooms: Understanding a framework for K-12 science education. The Science Teacher, 78(9), 34–40.
Cantrell, P., Pekcan, G., Itani, A., & Velasquez-Bryant, N. (2006). The effects of engineering modules on student learning in middle school science classrooms. Journal of Engineering Education, 95(4), 301–309.
Carr, R. L., Bennett, L. D., & Strobel, J. (2012). Engineering in the K-12 STEM standards of the 50 U.S. states: An analysis of presence and extent. Journal of Engineering Education, 101(3), 539–564.
Comrey, A. L., & Lee, H. B. (1992). A first course in factor analysis. Hillsdale, NJ: Erlbaum.
Cottrell, S. (2005). Critical thinking skills. Developing effective analysis and argument. New York, NY: Palgrave Macmillan.
Crotty, E. A., Guzey, S. S., Roehrig, G. H., Glancy, A. W., Ring-Whalen, E. A., & Moore, T. J. (2017). Approaches to integrating engineering in STEM units and student achievement gains. Journal of Pre-College Engineering Education Research, 7(2), 1–14.
Eder, W. E. (2013). Engineering design vs. artistic design: Some educational consequences. US-China Education Review A, 3(4), 259–280.
Ennis, R. H. (1996). Critical thinking dispositions: Their nature and accessibility. Inform. Log., 18(2–3), 165–182.
Facione, N., Facione, P., & Giancarlo, C. A. (1994). Critical thinking disposition as a measure of competent clinical judgment: The development of the California critical thinking disposition inventory. Journal of Nursing Education, 33(8), 345–343.
Fan, S. C., Yu, K. C., & Lou, S. J. (2018). Why do students present different design objectives in engineering design projects? International Journal of Technology and Design Education, 28(4), 1039-1060. https://doi.org/10.1007/s10798-017-9420-5.
Fornell, C. (1982). A second generation of multivariate analysis methods. New York, NY: Praeger.
Gale, J., Koval, J., Ryan, M., Usselman, M., & Wind, S. (2018). Implementing NGSS engineering disciplinary core ideas in middle school science classrooms: Results from the field. Journal of Pre-College Engineering Education Research, 9(1), 11–29.
Grubbs, M., & Strimel, G. (2015). Engineering design: The great integrator. Journal of STEM Teacher Education, 50(1), 77–90.
Guzey, S. S., Ring-Whalen, E. A., Harwell, M., & Peralta, Y. (2019). Life STEM: A case study of life science learning through engineering design. International Journal of Science and Mathematics Education, 17(1), 23–42. https://doi.org/10.1007/s10763-017-9860-0.
Haghparast, M., Abdullah, N., & Nasaruddin, F. H. (2018). Fog learning for cultivating critical thinking in information seeking process. Concurrency and Computation Practice and Experience, e5002, 1–13. Retrieved from doi: https://doi.org/10.1002/cpe.5002.
Han, S., Capraro, R., & Capraro, M. M. (2015). How science, technology, engineering, and mathematics (STEM) project-based learning (PBL) affects high, middle, and low achievers differently: The impact of student factors on achievement. International Journal of Science and Mathematics Education, 13(5), 1089–1113. https://doi.org/10.1007/s10763-014-9526-0.
Harrington, D. (2008). Confirmatory factor analysis. New York: Oxford University Press.
Hoepfl, M. (2016). Teaching and learning in project-based learning, technology and engineering education, and related subjects. In M. Hoepfl (Ed.), Exemplary teaching practice in technology and engineering education (pp. 1–32). Reston, VA: Council on Technology and Engineering Teacher Education.
Householder, D. L., & Hailey, C. E. (Eds.). (2012). Incorporating engineering design challenges into STEM courses.Retrieved from ERIC database. (ED537386). Accessed 18 Mar 2019.
Hynes, M., Portsmore, M., Dare E., Milto, E., Rogers, C., Hammer, D., & Carberry, A. (2011). Infusing engineering design into high school STEM courses.Retrieved from https://digitalcommons.usu.edu/ncete_publications/165. Accessed 8 Aug 2019.
International Technology and Engineering Educators Association [ITEEA]. (Ed.). (2009). The overlooked STEM imperatives: technology and engineering. Reston, VA: Author.
Jin, Y., & Chusilp, P. (2006). Study of mental iteration in different design situations. Design Studies, 27(1), 25–55. https://doi.org/10.1016/j.destud.2005.06.003.
Johns, G., & Mentzer, N. (2016). STEM integration through design and inquiry. Technology and Engineering Teacher, 76(3), 13–17.
Jöreskog, K. G., & Sörbom, D. (1986). LISREL VI: Analysis of linear structural relationships by maximum likelihood, instrumental variables, and least squares methods. Hilllsdale, NJ: Scientific Software International.
Jöreskog, K. G., & Sörbom, D. (1993). LISREL 8: Structural equation modeling with the SIMPLIS command language. Hilllsdale, NJ: Scientific Software International.
Katz, R. (2015). Integrating analysis and design in mechanical engineering education. Procedia CIRP, 36, 23–28. https://doi.org/10.1016/j.procir.2015.01.042.
Kelley, T. R. (2010). Staking the claim for the ‘T’ in STEM. The Journal of Technology Studies, 36(1), 2–11.
Kelloway, E. K. (1998). Using LISREL for structural equation modeling: A researcher's guide. Thousand Oaks: Sage Publications.
Kimbell, R., Stables, K., Wheeler, A. D., Wozniak, A. V., & Kelly, A. V. (1991). The assessment of performance in design and technology. London: Schools Examinations and Assessment Council and HMSO.
Kline, R. B. (1998). Principles and practice of structural equation modeling. New York: Guilford Press.
Kolodner, J. L. (2002). Facilitating the learning of design practices: Lessons learned from an inquiry into science education. Journal of Industrial Teacher Education, 39(3), 9–40.
Kolodner, J. L., Gray, J., & Fasse, B. B. (2003). Promoting transfer through case-based reasoning: Rituals and practices in learning by design™ classrooms. Cognitive Science Quarterly, 3, 119–170.
Layton, D. (1991). Science education and praxis: The relationship of school science to practical action. Studies in Science Education, 19(1), 43–79. https://doi.org/10.1080/03057269108559992.
Magana, A. J. (2017). Modeling and simulation in engineering education: A learning progression. Journal of Professional Issues in Engineering Education and Practice, 143(4), 04017008.
Maiorana, V. (1992). Critical thinking across the curriculum: Building the analytical classroom. Bloomington: ERIC Clearinghouse on Reading and Communication Skills and EDINFO Press.
McCormick, R. (1997). Conceptual and procedural knowledge. International Journal of Technology and Design Education, 7(1–2), 141–159.
McCormick, R. (2004). Issues of learning and knowledge in technology education. International Journal of Technology and Design Education, 14(1), 21–44.
McDonald, C. V. (2016). STEM education: A review of the contribution of the disciplines of science, technology, engineering and mathematics. Science Education International, 27(4), 530–569.
Mehalik, M. M., Doppelt, Y., & Schuun, C. D. (2008). Middle-school science through design based learning versus scripted inquiry: Better overall science concept learning and equity gap reduction. Journal of Engineering Education, 97(1), 71–85.
Mentzer, N., Becker, K., & Sutton, M. (2015). Engineering design thinking: High school students' performance and knowledge. Journal of Engineering Education, 104, 417–432. https://doi.org/10.1002/jee.20105.
Mentzer, N., Huffman, T., & Thayer, H. (2014). High school student modeling in the engineering design process. International Journal of Technology and Design Education, 24(3), 293–316.
Merrill, C., Custer, R. L., Daugherty, J., Westrick, M., & Zeng, Y. (2008). Delivering core engineering concepts to secondary level students. Journal of Technology Education, 20(1), 48–64.
Ministry of Education. (2018). Technology curriculum guidelines for 12-year basic education. Taipei, Taiwan: Author.
Mutakinati, L., Anwari, I., & Kumano, Y. (2018). Analysis of students’ critical thinking skill of middle school through STEM education project-based learning. Journal Pendidikan IPA Indonesia, 7(1), 54–65. https://doi.org/10.15294/jpii.v7i1.10495.
National Research Council [NRC]. (2009). Engineering in K-12 education: Understanding the status and improving the prospects. Washington, DC: The National Academies Press.
NGSS Lead States. (2013). Next generation science standards: For states, by states. Washington, DC: National Academies Press.
Norris, S. P., & Ennis, R. H. (1989). Evaluating critical thinking. Pacific Grove, CA: Midwest Publications.
Norström, P. (2013). Engineers’ non-scientific models in technology education. International Journal of Technology and Design Education, 23(2), 377–390.
Renaud, R. D., & Murry, H. G. (2008). A comparison of a subject-specific and a general measure of critical thinking. Thinking Skills and Creativity, 3, 85–93.
Schnittka, C. G., & Bell, R. L. (2011). Engineering design and conceptual change in science: Addressing thermal energy and heat transfer in eighth grade. International Journal of Science Education, 33, 1861–1887.
Schreiber, J. B., Nora, A., Stage, F. K., Barlow, E. A., & King, J. (2006). Reporting structural equation modeling and confirmatory factor analysis results: A review. The Journal of Educational Research, 99(6), 323–338. https://doi.org/10.3200/joer.99.6.323-338.
Sidawi, M. M. (2009). Teaching science through designing technology. International Journal of Technology and Design Education, 19(3), 269–287.
Sophia, S. (2008). Perceptions of students' learning critical thinking through debate in a technology classroom: A case study. Journal of Technology Studies, 34(1), 39–44.
Strimel, G. J., Kim, E., Bartholomew, S. R., & Cantu, D. V. (2018). Examining engineering design cognition with respect to student experience and performance. International Journal of Engineering Education, 34(6), 1910–1929.
Vieira, C., Seah, Y. Y., & Magana, A. J. (2018). Students' experimentation strategies in design: Is process data enough? Computer Applications in Engineering Education, 26, 1903–1914. https://doi.org/10.1002/cae.22025.
Yu, K. C., Lin, K. Y., & Fan, S. C. (2013). How high school students apply knowledge in engineering design projects. International Journal of Engineering Education, 29(6), 1604-1614.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
ESM 1
(DOCX 50.9 kb)
Appendix 1
Appendix 1
Rights and permissions
About this article
Cite this article
Yu, KC., Wu, PH. & Fan, SC. Structural Relationships among High School Students’ Scientific Knowledge, Critical Thinking, Engineering Design Process, and Design Product. Int J of Sci and Math Educ 18, 1001–1022 (2020). https://doi.org/10.1007/s10763-019-10007-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10763-019-10007-2