Abstract
An equivalent circuit model of millimeter wave second harmonic oscillator stabilized with a transmission cavity has been proposed for constructing analytical formulations between performance parameters of the oscillator and parameters of the circuit. The model consists of an equivalent circuit of fundamental wave and that of second harmonic wave. Each of the circuits comprises circuit models of main cavity, transmission waveguide, and transmission cavity. Absorbing material placed between the transmission waveguide and the transmission cavity can suppress additional resonances originated from transmission cavity. The behavior of the second harmonic oscillator can be effectively described by the circuit model. Furthermore, based on this model, mechanical tuning characteristics have been studied at first, and then analytical formulas for quality factor and efficiency depending on circuit parameters have been derived. The circuit parameters can be conveniently extracted by electromagnetic field simulation. Hence the formulas exhibit both compact form and enough accuracy. Thereafter, general rules of performance parameters varying with circuit parameters have been deduced for the harmonic oscillators. Then some design considerations have been derived according to the corresponding analysis. The equivalent circuit model is useful for designing and adjusting millimeter wave second harmonic stabilizing oscillator with a transmission cavity.
Similar content being viewed by others
References
J. R. Ashley, and C. B. Searles, Microwave oscillator noise reduction by a transmission stabilizing cavity [J]. IEEE Trans. Microwave Theor. Tech. 16(9), 743–748 (1968)Sep.
S. Nagano, and S. Ohnaka, A low-noise 80-GHz silicon IMPATT oscillator highly stabilized with a transmission cavity [J]. IEEE Trans. Microwave Theor. Tech. 22(12), 1152–1159 (1974)Dec.
K. Schunemann, and R. Knochel, On the matching of transmission cavity stabilized microwave oscillators [J]. IEEE Trans. Microwave Theor. Tech. 26(3), 147–155 (1978)Mar.
H. Eisele, 355 GHz oscillator with GaAs TUNNETT diode [J]. Electron. Lett. 41(6), 329–331 (2005).
H. Eisele, and R. Kamoua, High-performance oscillators and power combiners with InP gunn devices at 260–330 GHz [J]. IEEE Microw. Wirel. Compon. Lett. 16(5), 284–286 (2006).
H. Eisele, InP Gunn devices for 400–425 GHz [J]. Electron. Lett. 42(6), 358–359 (2006).
H. Eisele, M. Naftaly, and R. Kamoua, Generation of submillimeter-wave radiation with GaAs tunnett diodes and InP gunn devices in a second or higher harmonic mode [J]. Int. J. Infrared Milli. Waves. 26(1), 1–14 (2005).
D. L. Zhu and J. P. Xu, Analysis of millimeter-wave harmonic oscillators stabilized by reflection cavities [C]. Microwave and Millimeter-Wave Symposium of China, NingBo, 2, 761–764, (2007), Oct.
T. G. Gan, Editor-in-chief. Millimeter wave engineering [M]. (UESTC Press, Chengdou, 2006, )pp. 323–430(in Chinese).
H. Barth, A high Q cavity stabilized gunn oscillator at 94 GHz [C]. IEEE MTT-S Int. Microwave Sym. Dig. 86(1), 179–182 (1986).
E. J., Shelton Jr., Stabilization of microwave oscillators [J]. IEEE Trans. Electron Devices 1(4), 30–40 (1954)Dec.
H. -J. Thaler, G. Ulrich, and G. Weidmann, Noise in IMPATT diode amplifiers and oscillators [J]. IEEE Trans. Microwave Theor. Tech. 19(8), 692–705 (1971)Sep.
H. Hemmati, J. C. Mather, and W. L. Eichhorn, Submillimeter and millimeter wave characterization of absorbing materials [J]. Appl. Opt. 24(24), 4489–4492 (1985)Dec.
H. Barth, A wideband, Backshort-tunable second harmonic W-band Gunn-oscillator [C]. IEEE MTT-S Int. Microwave Sym. Dig. 81(1), 334–337 (1981).
Acknowledgment
This work is supported by The National Science Foundation of China (NSFC) under grant 60471017 and grant 60621002.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhu, D., Xu, J. Theoretical Study of Millimeter Wave Harmonic Oscillator Stabilized with a Transmission Cavity. Int J Infrared Milli Waves 29, 570–578 (2008). https://doi.org/10.1007/s10762-008-9351-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10762-008-9351-z