Abstract
The existence of fine and ultra-fine particles in mining tailings presents significant challenges to the geotechnical engineer when the tailings are used as construction materials to build a tailing dam. Tailings dewatering with flocculants before dam construction may be an effective method to alleviate or mitigate the stability problem. In this paper, the correlation between the geotechnical stability of flocculated and dewatered fine tailings and the flocculant type was investigated, from which the method to enhance the tailings geotechnical stability was developed based on the screening of effective flocculants. Three types of flocculants were applied to flocculate and dewater a mining fine tailing in a consolidation testing system, followed by geotechnical stability analysis via direct shearing testing and a case study by GEOSLOPE. Experimental results demonstrated the effect of flocculant type on geotechnical stability with the dewatering behaviors (dewatering rate and shear strength) of fine tailings strongly determined by the flocculant type and their dosages. The combination of the anionic and cationic flocculants provided the best performance in enhancing both the tailings dewatering and the geotechnical stability of tailing dams. Fundamental study results from measuring Zeta potential of fine-flocculant systems and scanning electron microscopy of flocculated fines revealed the mechanism behind the obtained test results that correctly selected flocculant types reduces repulsive force between the fines and the flocculant molecules, and also produce larger size of aggregates and larger void spaces that ensure effective dewatering, strength buildup and geotechnical stability of tailing dams.
Similar content being viewed by others
Data Availability
Enquiries about data availability should be directed to the authors.
Abbreviations
- GEJ:
-
A newly developed cationic flocculant
- 3379:
-
A conventional anionic flocculant
- %Wt:
-
(Mass of solute/mass of solution) × 100%
- SEM:
-
Scanning electron microscope
References
Aylmore MG, Muir DM (2001) Thiosulfate leaching of gold-a review. Miner Eng 14:135–174. https://doi.org/10.1016/S0892-6875(00)00172-2
Bascetin A, Tuylu S, Adiguzel D, Ozdemir O (2016) New technologies on mine process tailing disposal. J Geol Resource Eng 2:63–72. https://doi.org/10.17265/2328-2193/2016.02.002
Benito G, Benito-Calvo A, Gallart F, Martin-Vide JP, Regues D, Blade E (2001) Hydrological and geomorphological criteria to evaluate the dispersion risk of waste sludge generated by the Aznalcollar mine spill (SW Spain). Environ Geol 40(4/5):417–428. https://doi.org/10.1007/s002540000230
Blight GE (1997) Destructive mudflows as a consequence of tailings dyke failures. Proc Instn Civ Engrs 125:9–18. https://doi.org/10.1680/igeng.1997.28992
Courtney D, Sumi S, Deborah JR (2017) Geotechnical properties of polymer-amended tailings solvent recovery unit (TSRU) oil sands tailings. Can Geotech J 54(9):1331–139. https://doi.org/10.1139/cgj-2016-0028
Gholami R, Simms P (2015) Shear behaviour in element testing of polymer amended mature fine tailings. In: Proceedings of the 68th Canadian geotechnical conference, canadian geotechnical society, Richmond
Jeeravipoolvarn S, Scott J, Chalaturnyk R (2009) Geotechnical characteristics of laboratory in-line thickened oil sands tailings, In: Proceedings of tailings and mine waste, information technology, creative media, Vancouver, pp 813-828
Kaitna R, Palucis MC, Yohannes B, Hill KM, Dietrich WE (2016) Effects of coarse grain size distribution and fine particle content on pore fluid pressure and shear behavior in experimental debris flows. JGR Ear Sci 121(2):415–441. https://doi.org/10.1002/2015JF003725
Kostadinov L, Fidancev B, Krstev B, Golomeov B, Golomeova M (2013) Construction of tailings dumps dams by using modern materials, In: Proceedings of the XV Balkan Mineral processing congress, Sozopol, Bulgaria, pp 12-16
Kuriqi A, Ardiclioglu M, Muceku Y (2016) Investigation of seepage effect on River Dike’s stability under steady state and transient conditions. Pollack Periodica 11(2):87–104. https://doi.org/10.1556/606.2016.11.2.8
Labuz JF, Zang A (2012) Mohr-coulomb failure criterion. Rock Mech Rock Eng 45(6):975–979. https://doi.org/10.1007/978-3-319-07713-0_19
Liu Y, Lv CC, Ding J, Qian P, Zhang XM, Yu Y, Ye SF, Chen YF (2016) The use of the organic–inorganic hybrid polymer Al (OH) 3–polyacrylamide to flocculate particles in the cyanide tailing suspensions. Miner Eng 89:108–117. https://doi.org/10.1016/j.mineng.2016.01.018
Maedeh PA, Wu W, da Fonseca AV (2018) A new approach to estimate the factor of safety for rooted slopes with an emphasis on the soil property, geometry and vegetated coverage. Adv Comput Des 3(3):269–288. https://doi.org/10.12989/acd.2018.3.3.269
Motlagh AT, Ghanbari A, Maedeh PA (2018) A new analytical approach to estimate the seismic tensile force of geosynthetic reinforcement respect to the uniform surcharge of slopes. Earthquakes Struct 15(6):687–99. https://doi.org/10.12989/eas.2018.15.6.687
Muceku Y, Korini O, Kuriqi A (2016) Geotechnical analysis of Hill’s slopes areas in heritage town of Berati Albania. Periodica Polytech Civil Eng 60(1):61–73. https://doi.org/10.3311/PPCI.7752
Ofori P, Nguyen AV, Firth B, McNally C, Ozdemir O (2011) Shear-induced floc structure changes for enhanced dewatering of coal preparation plant tailings. Chem Eng J 172(2–3):914–923. https://doi.org/10.1016/j.cej.2011.06.082
Reid D, Fourie AB (2012) The effects of synthetic flocculants on some geotechnical properties of kaolin clay. In: Proceedings of the 15th international seminar on paste and thickened tailings, in Jewell, Fourie and Paterson (Eds.), Australia Centre for Geomechanics, Perth, pp 157-168
Reid D, Fourie AB (2016) Laboratory assessment of the effects of polymer treatment on geotechnical properties of low plasticity soil slurry. Can Geotech J 53(10):1718–1730. https://doi.org/10.1139/cgj-2015-0343
Sabah E, Yüzer H, Çelikc MS (2004) Characterization and dewatering of fine coal tailings by dual-flocculant systems. Int J Mine Process 74(1–4):303–315. https://doi.org/10.1016/j.minpro.2004.03.001
Slatter PT, Seddon KD (2015) Evaluation of the rheology of pipehead flocculated tailings. in R Jewell and AB Fourie (Eds). In: Proceedings of the 18th international seminar on paste and thickened tailings, Australian Centre for Geomechanics, Perth pp 131-137
Valenzuela L (2016) Design, construction, operation and the effect of fines content and permeability on the seismic performance of tailings sand dams in Chile. Obras y Proyectos 19:6–22. https://doi.org/10.4067/S0718-28132016000100001
Van Niekerk HJ, Viljoen MJ (2005) Causes and consequences of the Merriespruit and other tailings-dam failures. Land Degrad Dev 16:201–212. https://doi.org/10.1002/ldr.681
Wang C, Harbottle D, Liu QX, Xu ZH (2014) Current state of fine mineral tailings treatment: a critical review on theory and practice. Miner Eng 74:86–90. https://doi.org/10.1016/j.mineng.2014.01.018
Wang GJ, Sen T, Hu B, Kong X, Chen J (2020) An experimental study on tailings deposition characteristics and variation of tailings dam saturation line. Geomech Eng 23(1):85–92. https://doi.org/10.12989/gae.2020.23.1.085
Wu S, Yang C, Zhang C, Mao H, Jing X (2017) Indoor scale-down test of tailings. Chin J Eng 39:1485–1492. https://doi.org/10.13374/j.issn2095-9389.2017.10.004
Wu S, Yang C, Zhang C, Zhang X, Wang G (2017) The effects of silt content on the mechanical properties of tailings. Chin J Rock Mech Eng 36:2007–2017. https://doi.org/10.13722/j.cnki.jrme.2016.1456
Yang Y, Sun W, Li S (2011) Tailings dam stability analysis of the process of recovery. Procedia Eng 26:1782–1787. https://doi.org/10.1016/j.proeng.2011.11.2367
Yao Y (2012) The effect of flocculant on the geotechnical properties of mature fine tailings: an experimental study. In: Proceedings of the Third international oil sands tailings conference, oil sands research facility, Edmonton pp 1-16
Zhang ZJ (1999) Sewerage, wastewater engineering, 4th edn. China Architecture and Building Press, Beijing
Znidarcic D, Adkins S, Utting L, Catling M (2015) Rheomax ETD technology, a laboratory study of application performance and associated geotechnical characteristics for polymer assisted tailings deposition of oil sands MFT. In: Proceedings of tailings and mine waste, The University of British Columbia, Vancouver
Acknowledgement
This research is funded by the Scholarship for Visiting Scholars Program of Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Research No.: Z01700700 5.
Funding
The authors have not disclosed any funding.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors have not disclosed any competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zhang, C., Ma, C., Xiong, J. et al. Tailings Dam Geotechnical Stability Improvement due to Flocculants Treated Fine Tailings Dewatering. Geotech Geol Eng 41, 759–772 (2023). https://doi.org/10.1007/s10706-022-02300-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10706-022-02300-9