Skip to main content
SpringerLink
Log in

Evaluation of Piled Raft Performance Using a Verified 3D Nonlinear Numerical Model

  • Original paper
  • Published:
Geotechnical and Geological Engineering Aims and scope Submit manuscript

Abstract

The piled raft foundation system presents a feasible foundation option for high rise buildings. Piled raft foundations have a complex three-dimensional soil-structure interaction scheme including the pile-soil interaction, pile–pile interaction, raft-soil interaction, and finally the piles-raft interaction. Consequently, comprehensive 3D numerical models are sought to investigate this complex interaction. In this paper, a 3D finite element model was verified using published geotechnical centrifuge test results to further enhance the accuracy of the model. The study considered piled rafts installed in sand with stiffness that varies linearly with depth. A comprehensive parametric study was conducted to evaluate the effect of different foundation parameters including: pile diameter, pile spacing, raft width, and raft thickness on the overall behavior of the piled raft. The load carrying capacity of the piled raft and the load sharing mechanism between the raft and piles are evaluated. It was found that the load carried by piles is higher for rigid rafts (Kf > 600) due to the minimal interaction between the raft and subsoil compared to the relatively flexible rafts (Kf < 150). Moreover, the load transmitted by the raft increased by about 75% as the raft width increased from 4 to 7 m.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18

Similar content being viewed by others

References

  • Alnuaim AM, El Naggar H, El Naggar MH (2015a) Performance of micropiled raft in sand subjected to vertical concentrated load: centrifuge modeling. Can Geotech J 52(1):33–45

    Article  Google Scholar 

  • Alnuaim AM, El Naggar MH, El Naggar H (2015b) Performance of micropiled raft in clay subjected to vertical concentrated load: centrifuge modeling. Can Geotech J 52(12):2017–2029

    Article  Google Scholar 

  • Alnuaim AM, El Naggar MH, El Naggar H (2016) Numerical investigation of the performance of micropiled rafts in sand. Comput Geotech 77:91–105

    Article  Google Scholar 

  • Brown PT (1969) Numerical analyses of uniformly loaded circular rafts on deep elastic foundations. Géotechnique 19(3):399–404

    Article  Google Scholar 

  • Burland JB, Broms BB, De Mello VB (1978) Behaviour of foundations and structures. In: Proceedings of 9th ICSMFE Tokyo, vol 2, pp 496–546

  • Clancy P, Randolph MF (1993) An approximate analysis procedure for piled raft foundations. Int J Numer Anal Meth Geomech 17(12):849–869

    Article  Google Scholar 

  • El Naggar MH, Sakr M (2000) Evaluation of axial performance of tapered piles from centrifuge tests. Can Geotech J 37(6):1295–1308

    Article  Google Scholar 

  • Faber O (1933) Pressure distribution under bases and stability of foundations. Struct Eng 11(3):116–125

    Google Scholar 

  • Horikoshi K, Randolph MF (1996) Centrifuge modelling of piled raft foundations on clay. Géotechnique 46(4):741–752

    Article  Google Scholar 

  • Horikoshi K, Randolph MF (1997) On the definition of raft-soil stiffness ratio for rectangular rafts. Géotechnique 47(5):1055–1061

    Article  Google Scholar 

  • Horikoshi K, Watanabe T, Fukuyama H, Matsumoto T (2002) Behavior of piled raft foundations subjected to horizontal loads. In: Phillips R, Guo PJ, Popescu R (eds) Physical modelling in geotechnics: proceeding of the international conference. St John’s, Newfoundland, Canada: Taylor & Francis

  • Horikoshi K, Matsumoto T, Hashizume Y, Watanabe T (2003a) Performance of piled raft foundations subjected to dynamic loading. Int J Phys Model Geotech 3(2):51–62

    Google Scholar 

  • Horikoshi K, Matsumoto T, Hashizume Y, Watanabe T, Fukuyama H (2003b) Performance of piled raft foundations subjected to static horizontal loads. Int J Phys Model Geotech 3(2):37–50

    Google Scholar 

  • Katzenbach R, Arslan U, Moorman C, Reul O (1998) Piled raft foundation: interaction between piles and raft. Darmstadt Geotech Darmst Univ Technol 4:279–296

    Google Scholar 

  • Matsumoto T, Fukumura K, Horikoshi K, Oki A (2004a) Shaking table tests on model piled rafts in sand considering influence of superstructures. Int J Phys Model Geotech 4(3):21–38

    Google Scholar 

  • Matsumoto T, Fukumura K, Pastsakorn K, Horikoshi K, Oki A (2004b) Experimental and analytical study on behavior of model piled raft in sand subjected to horizontal and moment loading. Int J Phys Model Geotech 4(3):1–19

    Google Scholar 

  • Plaxis BV (2012) Plaxis 3D version 2012 reference manual. Delft

  • Poulos HG (2000) Practical design procedures for piled raft foundations. In: Hemsley J (ed) Design applications of raft foundations. ICE Publishing, London, pp 425–467

    Chapter  Google Scholar 

  • Poulos HG (2001) Piled raft foundations: design and applications. Geotechnique 51(2):95–113

    Article  Google Scholar 

  • Poulos HG, Davis EH (1980) Pile foundation analysis and design. Wiley, New York

    Google Scholar 

  • Poulos HG, Small JC, Chow H (2011) Piled raft foundations for tall buildings. Geotech Eng J SEAGS AGSSEA 42(2):78–84

    Google Scholar 

  • Randolph MF (1994) Design methods for piled groups and piled rafts. In: Proceedings of 13th ICSMFE, New Delhi, India, pp 61–82

  • Ta LD, Small JC (1996) Analysis of Piled Raft System in Layered Soils. Int J Numer Anal Meth Geomech 20(1):57–72

    Article  Google Scholar 

  • Terzaghi K, Peck R, Gholamreza M (1996) Soil mechanics in engineering practice. Wiley, New York

    Google Scholar 

  • Tomlinson MJ (1996) Foundation design and construction. Longman Publishing Group, London

    Google Scholar 

Download references

Acknowledgements

The authors gratefully acknowledge the support of Natural Science and Engineering Research Council of Canada and King Saud University (through the Saudi Cultural Bureau in Canada) for supporting this research.

Author information

Authors and Affiliations

  1. Department of Civil Engineering, College of Engineering, King Saud University, Riyadh, P.O. Box 800, Riyadh, 11421, Saudi Arabia

    Ahmed M. Alnuaim

  2. Department of Civil and Resource Engineering, Dalhousie University, 1360 Barrington Street, Halifax, NS, B3H 4R2, Canada

    Hany El Naggar

  3. Department of Civil and Environmental Engineering, University of Western Ontario, 1151 Richmond Street, London, ON, N6A 5B9, Canada

    M. Hesham El Naggar

Authors
  1. Ahmed M. Alnuaim
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Hany El Naggar
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. M. Hesham El Naggar
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ahmed M. Alnuaim.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Alnuaim, A.M., El Naggar, H. & El Naggar, M.H. Evaluation of Piled Raft Performance Using a Verified 3D Nonlinear Numerical Model. Geotech Geol Eng 35, 1831–1845 (2017). https://doi.org/10.1007/s10706-017-0212-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10706-017-0212-1

Keywords

Search

Navigation