Abstract
Tank bottom oily sludge (S) is collected from tank bottoms during cleaning operations and contaminated soil is collected after spills and leakages. Disposal of tank sludge is a significant item of tank maintenance for producers, refiners and transporters of petroleum materials. The objective of this paper is to investigate the use of various additives in the solidification of tank bottom sludge. The sludge was solidified using various combinations of additives including ordinary Portland cement (OPC), cement by-pass dust (CBPD) and quarry fines (QF). Geotechnical and leachability properties of the mixtures were determined. The use of OPC alone as a solidifying agent yielded the best results. This was followed by blends S:OPC:QF of 1:0.5:1.5 and S:CBPD of 1:2. Economically, the latter two mixtures would be considered more cost-effective in solidifying the sludge as the additives are waste by-product materials. The Toxicity Characteristic Leaching Procedure (TCLP) results indicated that no extracts exceeded the threshold TCLP limits established by U.S. Environmental Protection Agency (USEPA). The solidified material can be used in construction of roads, embankments and landfill layers.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Al-Ansary MS, Al-Tabbaa A (2007) Stabilization/solidification of synthetic petroleum drill cuttings. J Hazard Mater 141:410–421
Al-Futaisi A, Jamrah A, Yaghi B, Taha R (2007) Assessment of alternative management techniques of tank bottom petroleum sludge in Oman. J Hazard Mater 141:557–564
ASTM D 2166 (1998) Standard test method for unconfined compressive strength of cohesive soil. American Society for Testing and Materials, 100 Barr Harbor Dr., West Conshohocken, PA 19428, USA
ASTM D 2216 (1998) Standard test method for laboratory determination of water (moisture) content of soil and rock by mass. American Society for Testing and Materials, 100 Barr Harbor Dr., West Conshohocken, PA 19428, USA
ASTM D 3080 (1998) Standard test method for direct shear test of soils under consolidated drained conditions. American Society for Testing and Materials, 100 Barr Harbor Dr., West Conshohocken, PA 19428, USA
ASTM D 5084 (1998) Standard test method for measurement of hydraulic conductivity of saturated porous materials using a flexible wall permeameter. American Society for Testing and Materials, 100 Barr Harbor Dr., West Conshohocken, PA 19428, USA
Boutouil M, Levacher D (2002) Multifactorial study of macroscopic properties of solidified sludge. Part 1: compressive strength. J Ground Improv 6(1):1–11
Boutouil M, Levacher D (2005) Effect of high initial water content on cement-based sludge solidification. J Ground Improv 9(4):169–174
Coduto DP (2001) Foundation design: principles and practices. Prentice-Hall, Upper Saddle River
Daniel DE (ed) (1993) Geotechnical practice for waste disposal. Chapman & Hall, London
Glasser FP (1997) Fundamental aspects of cement solidification and stabilization. J Hazard Mater 52:151–170
Joshi RC, Lohita RP, Achari G (1997) Fly ash–cement mixtures for solidification and detoxification of oil and gas well sludges. Department of Civil Engineering, University of Calgary, Calgary, Alberta, Canada
Karamalidis AK, Voudrias EA (2007) Release of Zn, Ni, Cu, \(\text{SO}_{4}^{2-},\text{CrO}_{4}^{2-}\) as a function of pH from cement-based stabilized/solidified refinery oily sludge and ash from incineration of oily sludge. J Hazard Mater 141:591–606
Mitchell JK, Bray JD, Mitchell RA (1995) Material interactions in solid waste landfills. In: Proceedings of a specialty geoenvironment 2000 conference, ASCE, New Orleans, LO, USA, pp 568–590
Mohamedzein YE-A, Al-Rawas AA, Al-Aghbari MY, Qatan A, Al-Rawas A-H (2005) Assessment of crushed shales for use as compacted landfill liners. J Eng Geol 80(3–4):271–281
Morgan DS, Novoa JI, Halff AH (1984) Oil sludge solidification using cement kiln dust. J Environ Eng 110:935–948
Sharma HD, Reddy KR (2004) Geoenvironmental engineering: site remediation, waste containment and emerging technologies. Wiley, Hoboken, NJ
Tuncan A, Tuncan M, Koyuncu H (2000) Use of petroleum-contaminated drilling wastes as sub-base material for road construction. J Waste Manag Res 18(5):489–505
USEPA (United States Environmental Protection Agency) (1989) Solidification/stabilization of CERCLA and RCRA wastes: physical tests, chemical testing procedures, technology, screening and field activities. EPA/625/6-89/022, Office of Research and Development, USEPA, Washington, DC, USA
USEPA (United States Environmental Protection Agency) (1993) Engineering bulletin: solidification/stabilization of organics and inorganics. EPA/540/S-92/015, Office of Research and Development, USEPA, Cincinnati, OH, USA
Wright RD, Noordhuis BR (1991) The treatment and disposal of oily sludge. Society of Petroleum Engineering of AIME, Richardson, TX
Zhang Z, Tao M (2008) Durability of cement stabilized low plasticity soils. J Geotech Geoenviron Eng 134(2):203–213
Zhu W, Zhang CL, Chiu ACF (2007) Soil–water transfer mechanism for solidified dredged materials. J Geotech Geoenviron Eng 133(5):588–598
Zou DH, Li LP (1999) Strengthening of solidified dilute tailings slurry. J Geotech Geoenviron Eng 125(1):11–15
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Taha, R.A., Mohamedzein, Y.EA., Al-Rawas, A.A. et al. Solidification of Tank Bottom Sludge. Geotech Geol Eng 28, 15–25 (2010). https://doi.org/10.1007/s10706-009-9273-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10706-009-9273-0