Abstract
This study proposes new contact models to be incorporated into discrete element method (DEM) to more accurately simulate the tensile softening in quasi-brittle materials, such as plain concrete and masonry with emphasis on fracture mechanism and post-peak response. For this purpose, a plain concrete specimen (double notched) and stack bonded masonry prism under direct tensile test are modeled. Furthermore, mixed mode crack propagation is investigated in concrete and brickwork assemblages. Two modeling approaches are proposed, the simplified and detailed meso modeling, both based on DEM. In the simplified meso-model, a smooth contact surface is considered between two separate blocks, whereas the internal structure of the material is explicitly represented as a tessellation into random polyhedral blocks in the detailed meso-model. Furthermore, recently developed tensile softening contact constitutive models implemented into a commercial discrete element code (3DEC) are used to simulate the softening behavior of concrete and masonry. As an important novel contribution, it is indicated that the proposed computational models successfully capture the complete (pre- and post-peak) material behavior and realistically replicate the cracking mechanism. Additionally, a sensitivity analysis demonstrates the influence of the various micro-contact parameters on the overall response of the examined materials.
Similar content being viewed by others
References
Adami CE, Vintzileou E (2008) Interventions to historic masonries: investigation of the bond mechanism between stones or bricks and grouts. Mater Struct Constr 41:255–267. https://doi.org/10.1617/s11527-007-9235-z
Bobiński J, Tejchman J (2005) Modelling of concrete behaviour with a non-local continuum damage approach. Arch Hydro Eng Environ Mech 52:243–263
Bocca P, Carpinteri A, Valente S (1990) Size effects in the mixed mode crack propagation: softening and snap-back analysis. Eng Fract Mech 35:159–170. https://doi.org/10.1016/0013-7944(90)90193-K
Bui TT, Limam A, Sarhosis V, Hjiaj M (2017) Discrete element modelling of the in-plane and out-of-plane behaviour of dry-joint masonry wall constructions. Eng Struct 136:277–294. https://doi.org/10.1016/j.engstruct.2017.01.020
Chen W, Konietzky H, Liu C et al (2018) Prediction of brickwork failure using discrete-element method. J Mater Civ Eng 30:06018012. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002431
Cundall PA (1971) A computer model for simulating progressive, large-scale movements in blocky rock systems. In: The international symposium on rock mechanics, pp 47–65
Cundall PA (1987) Distinct element models of rock and soil structure. In: Brown ET (ed) Analytical and computational methods in engineering rock mechanics. George Allen Unwin, London, pp 129–163
Gálvez JC, Elices M, Planas J (1999) Mixed mode fracture of concrete under proportional and nonproportional loading. Int J Fract 94:267–284. https://doi.org/10.1023/A:1007578814070
Ghazvinian E, Diederichs MS, Quey R (2014) 3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing. J Rock Mech Geotech Eng 6:506–521. https://doi.org/10.1016/j.jrmge.2014.09.001
Hordijk DA (1991) Local approach to fatigue of concrete. Delft University of Technology, Netherlands, PhD Dissertation
ITASCA (2004) 3DEC Universial Discrete Element Code theory and background. Minneapolis
Kazerani T (2013) A discontinuum-based model to simulate compressive and tensile failure in sedimentary rock. J Rock Mech Geotech Eng 5:378–388. https://doi.org/10.1016/j.jrmge.2013.07.002
Kazerani T, Zhao J (2010) Micromechanical parameters in bonded particle method for modelling of brittle material failure. Int J Numer Anal Methods Geomech 34:1877–1895. https://doi.org/10.1002/nag.884
Lemos JV (2007) Discrete element modeling of masonry structures. Int J Archit Herit 1:190–213. https://doi.org/10.1080/15583050601176868
Lemos JV (2016) Modelling the dynamics of masonry structures with discrete elements. Open Constr Build Technol J 10:210–219. https://doi.org/10.2174/1874836801610010210
Lemos JV, Campos Costa A (2017) Simulation of shake table tests on out-of-plane masonry buildings. Part (V): discrete element approach. Int J Archit Herit 11:117–124. https://doi.org/10.1080/15583058.2016.1237587
Lisjak A, Grasselli G (2014) A review of discrete modeling techniques for fracturing processes in discontinuous rock masses. J Rock Mech Geotech Eng 6:301–314. https://doi.org/10.1016/j.jrmge.2013.12.007
Lourenço PB (1996) Computational strategies for masonry structures. Delf University of Technology, Netherlands, PhD Dissertation
Lourenço PB, Almeida JC, Barros JA (2005) Experimental investigation of bricks under uniaxial tensile testing . J Br Masonry Soc 18(1):11–20
Peerlings RHJ, de Borst R, Brekelmans WAM, Geers MGD (1998) Gradient-enhanced damage modelling of concrete fracture. Mech Cohesive-Frictional Mater 3:323–342. https://doi.org/10.1002/(SICI)1099-1484(1998100)3:4<323::AID-CFM51>3.0.CO;2-Z
Pina-Henriques J, Lourenço PB (2006) Masonry compression: a numerical investigation at the meso-level. Eng Comput 23:382–407. https://doi.org/10.1108/02644400610661163
Pulatsu B, Bretas EM, Lourenço PB (2016) Discrete element modeling of masonry structures: validation and application. Earthq Struct 11:563–582. https://doi.org/10.12989/eas.2016.11.4.563
Pulatsu B, Sarhosis V, Bretas EM et al (2017) Non-linear static behaviour of ancient free-standing stone columns. Proc Inst Civ Eng Struct Build 170:406–418. https://doi.org/10.1680/jstbu.16.00071
Pulatsu B, Erdogmus E, Lourenço PB (2019) Comparison of in-plane and out-of-plane failure modes of masonry arch bridges using discontinuum analysis. Eng Struct 178:24–36. https://doi.org/10.1016/j.engstruct.2018.10.016
Quey R, Renversade L (2018) Optimal polyhedral description of 3D polycrystals: method and application to statistical and synchrotron X-ray diffraction data. Comput Methods Appl Mech Eng 330:308–333. https://doi.org/10.1016/j.cma.2017.10.029
Quey R, Dawson PR, Barbe F (2011) Large-scale 3D random polycrystals for the finite element method: generation, meshing and remeshing. Comput Methods Appl Mech Eng 200:1729–1745. https://doi.org/10.1016/j.cma.2011.01.002
Resende R, Lemos JV, Dinis PB (2014) Application of a discontinuity model with softening to the analysis of dam foundations using the discrete element method. In: Konietzky H (ed) 1st International UDEC/3DEC symposium: numerical modelling of discrete materials in geotechnical engineering, civil engineering and earth sciences, pp 249–255
Reyes E, Casati MJ, Gálvez JC (2004) Normal/shear cracking of brickwork masonry. In: Fracture mechanics of concrete structures, pp 415–422
Reyes E, Casati MJ, Gálvez JC (2008) Cohesive crack model for mixed mode fracture of brick masonry. Int J Fract 151:29–55. https://doi.org/10.1007/s10704-008-9243-1
Rots JG (1988) Computational modeling of concrete fracture. Delft University of Technology, Netherlands, PhD Dissertation
Rots JG, de Borst R (1989) Analysis of concrete fracture in direct tension. Int J Solids Struct 25:1381–1394
Sarhosis V, Lemos JV (2018) A detailed micro-modelling approach for the structural analysis of masonry assemblages. Comput Struct 206:66–81. https://doi.org/10.1016/j.compstruc.2018.06.003
Van der Pluijm R (1997) Nonlinear behavior of masonry under tension. Heron 42:25–54
Van Mier JGM, Man HK (2009) Some notes on microcracking, softening, localization, and size effects. Int J Damage Mech 18:283–309. https://doi.org/10.1177/1056789508097545
van Mier JGM, van Vliet MR (2002) Uniaxial tension test for the determination of fracture parameters of concrete state of the art. Eng Fract Mech 69:235–247
Vasconcelos GFM (2005) Experimental investigations on the mechanics of stone masonry: Characterization of granites and behavior of ancient masonry shear walls. Universidade do Minho, Portugal, PhD Dissertation
Vintzileou EN, Adami CEN (2009) The bond mechanism in stone- or brick-to-grout interfaces. Strain 45:400–409. https://doi.org/10.1111/j.1475-1305.2008.00545.x
Acknowledgements
Authors would like to express their gratitude to Itasca Educational Partnership Program (IEP) for their kind support and providing 3DEC software.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Pulatsu, B., Erdogmus, E., Lourenço, P.B. et al. Simulation of uniaxial tensile behavior of quasi-brittle materials using softening contact models in DEM. Int J Fract 217, 105–125 (2019). https://doi.org/10.1007/s10704-019-00373-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-019-00373-x