The results of evaluating the adhesion strength and mechanical characteristics of elementary filaments used to make LUP carbon tape after metal plating the tape with titanium and stainless steel are presented. The thickness of these coatings is determined by atomic force microscopy and also by measuring the diameter of filaments before and after metal plating. Two types of single-layer coatings are considered – titanium grade VT1-0 and stainless steel grade 12X18H10T, as well as a two-layer coating consisting of a layer of titanium with a layer of stainless steel on top. To determine the adhesive strength using the pull-out method, a binder was used based on epoxy resin and an amine hardener.
Similar content being viewed by others
References
N. I. Baurova and V. A. Zorin, Application of Polymer Composite Materials in the Manufacture and Repair of Machines: Textbook [in Russian], MADI, Moscow (2016) 264 p.
I. A. Buyanov and D. S. Vdovin, Adhesives. Sealants. Technology. [in Russian], 10, 22-24 (2016).
S. V. Reznik, O. V. Denisov, et al., All materials: Encyclopedia [in Russian], 3, 2-6 (2012).
N. I. Baurova, V. A. Zorin, and V. M. Prikhodko, Polymer Sci. Ser. D, 8, No. 2, 92-95 (2015).
G. V. Malysheva and Y. Y. Shimina, Fiber Chemistry, 46, No. 4, 237-240 (2014).
V. A. Nelyub, Fiber Chemistry, 47, No. 1, 40-42 (2015).
A. S. Borodulin and L. P. Kobets, Novosti Materialovedeniya . Nauka i Tekhnologiya, 5, 5 (2013).
T. A. Kiriyenko, N. F. Lukina, et al., Klei. Germetiki. Tekhnologii, 2, 6-8 (2016).
V. K. Kryzhanovsky, V. V. Burlov, et al., Technical Properties of Polymeric Materials: Textbook [in Russian], Professiya, St. Petersburg (2003) 240 p.
B. L. Gorberg, A. A. Ivanov, et al., Ros. Khim. Zh., LV, No. 3, 7-13 (2011).
Yu. A. Gorbatkina, Klei. Germetiki. Tekhnologii, 10, 17-19 (2008).
Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, et al., Mekhanika Kompoz. Materialov, 43, No. 1, 3-14 (2007).
Yu. A. Gorbatkina and V. G. Ivanova-Mumzhieva, Klei. Germetiki. Tekhnologii, 3, 28-30 (2009).
The results of this work were obtained as part of the project on the topic “Scientific research on the development of composite materials with a controlled chaos structure and their use in high-tech production” under the task No. 11.7291.2017/BCh.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskie Volokna, No. 6, pp. 48 – 51, November – December 2018.
Rights and permissions
About this article
Cite this article
Nelyub, V.A., Gorberg, B.L., Grishin, M.V. et al. Properties and Technology of Applying Metal Coatings to Carbon Tape. Fibre Chem 50, 524–527 (2019). https://doi.org/10.1007/s10692-019-10022-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-019-10022-7