Abstract
Plane contact of a cylindrical punch and a half-space is considered in this article. Both the punch and the half-space are assumed to be functionally graded and thermally heat conducting. Frictional heat generation inside the contact region due to sliding of the punch over the half-space surface is taken into account. It is assumed that heat exchange between the free boundary of the half-space and the surrounding medium obeys Newton’s law, while the conditions for ideal thermal contact exists in the region in which the solids interact. Elastic parameters, thermal expansion coefficients and coefficients of thermal conductivities of the punch and the half-space are assumed to vary along the normal to the plane of contact. With the help of Fourier integral transforms, the problem is reduced to a system of three singular integral equations. The effects of non-homogeneity parameters of the graded materials on various subjects of interest are discussed and shown graphically.
Similar content being viewed by others
References
Sneddon IN (1965) The relation between load and penetration in the axi-symmetric Boussinesq problem for a punch of arbitrary profile. Int J Eng Sci 3: 47–57
Shield RT (1967) Load – displacement relations for elastic bodies. Z Agnew Math Phys 18: 682–693
Comez I, Birinci A, Erdol R (2004) Double receding contact problem for a rigid stamp and two elastic layers. Eur J Mech A 23: 909–924
Chaudhuri PK, Ray S (2003) Receding axisymmetric contact between a transversely isotropic layer and a transversely isotropic half-space. Bull Calcutta Math Soc 95: 151–164
El-borgi S, Abdelmoula R, Keer LM (2006) A receding contact plane problem between a functionally graded layer and a homogeneous substrate. Int J Solids Sruct 43: 658–674
Jing HS, Liao ML (1990) An improved finite element scheme for elastic contact problems with friction. Comput Struct 35: 571–578
Fabrikant VI (2006) Elementary solution of contact problems for a transversely isotropic layer bonded to a rigid foundation. Z Angew Math Phys 57: 464–490
Barik SP, Kanoria M, Chaudhuri PK (2006) Contact problem for an anisotropic elastic layer lying on an anisotropic elastic foundation under gravity. J Indian Acad Math 28: 205–223
Avci A, Yapici A (2006) Axisymmetric smooth contact for an elastic isotropic infinite hollow cylinder compressed by an outer rigid ring with circular profile. Acta Mech Sin 22: 46–53
Jaffar MJ (2002) Frictionless layered contact involving a flat punch with rounded ends or a conical punch with rounded apex. Int J Mech Sci 44: 545–560
Jaffar MJ (1991) Elastic strips in sliding contact. J Strain Anal 26: 193–199
Adams GG, Barber JR, Ciavarella M, Rice JR (2005) A paradox in sliding contact problems with friction. J Appl Mech 72: 1–3
Barber JR (1976) Some thermoelastic contact problems involving frictional heating. Quart J Mech Appl Math 29: 1–13
Ciavarella M, Johansson L, Afferrante L, Klarbring A, Barber JR (2003) Interaction of thermal contact resistance and frictional heating in thermoelastic instability. Int J Solids Struct 40: 5583–5597
Ciavarella M, Barber JR (2005) Stability of thermoelastic contact for a rectangular elastic block sliding against a rigid wall. Eur J Mech A 24: 371–376
Gwarny M, Pauk VJ (2002) Plane contact problem involving frictional heating for a thermoelastic wedge. J Therm Stress 25: 573–583
Hills DA, Barber JR (1986) Steady sliding of a circular cylinder over a thermally conducting half-plane. Int J Mech Sci 28: 613–622
Yevtushenko AA, Pauk VJ (1996) The non-stationary contact problem for rough bodies taking heat generation by friction into account. J Appl Math Mech 60: 687–692
Yevtushenko AA, Pauk VJ (1999) Steady state frictional heat generation on the periodical sliding contact. Math Methods Physicomech Fields 42: 95–99
Jang YH (2005) Effects of thermal contact resistance on transient thermoelastic contacts for an elastic foundation. J Appl Mech 72: 972–977
Comez I (2010) Frictional contact problem for a rigid cylindrical stamp and an elastic layer resting on a half plane. Int J Solids Sruct 47: 1090–1097
Jaffar MJ (2004) Axi-symmetric contact of a punch on an elastic halfspace in the presence of tangential tractions. Int J Mech Sci 46: 1233–1244
Pauk VJ (1999) Plane contact problem for a layer involving frictional heating. Int J Heat Mass Transf 42: 2583–2589
Pauk V (2004) Contact problem involving frictional heating for rough half-space. J Appl Mech 71: 287–290
Pauk V (2006) Plane contact problems involving frictional heating for wavy half-space. Tribol Lett 24: 237–242
Pauk V (2006) Plane contact involving friction and boundary roughness. Electron J Pol Agric Univ 9: 1–10
Pauk V, Wozniak M (2003) Frictional heating effects in the plane contact of a layer and a rigid flat punch. J Tech Phys 44: 237–244
Pauk V, Zastrau B (2002) 2D rolling contact problem involving frictional heating. Int J Mech Sci 44: 2573–2584
Marzeda J, Pauk V, Wozniak M (2001) Contact of a rigid body flat punch with a wedge supported by the Winkler foundation. J Theor Appl Mech 39: 563–575
Suresh S, Mortensen A (1998) Fundamentals of functionally graded materials. Institutes of Material Communications Ltd, London
Aboudi J, Pindera MJ, Arnold SM (1995) Thermo-inelastic response of functionally graded composites. Int J Solids Struct 32: 1675–1710
Wetherhold RC, Wang SS (1996) The use of functionally graded materials to eliminate or control thermal deformation. Compos Sci Tech 56: 1099–1104
Eltoukhy M, Asfour S, Almakky M, Huang C (2006) Thermoelastic instability in disk brakes: simulation of the heat generation problem. In: Excerpt from the proceedings of the COMSOL users conference, Boston
Lee K, Barber JR (1993) Frictionally-excited thermoelastic instability in automotive disk brakes. ASME J Tribol 115: 605–614
Yi Y-B, Barber JR, Hartsock DL (2002) Thermoelastic instabilities in automotive disk brakes-finite element analysis and experimental verification. In: Martins JAC, Monteiro Marques MDP (eds) Contact Mechanics. Kluwer, Dordrecht, , pp 187–202
Zagrodzki P (1990) Analysis of thermomechanical phenomena in multidisc clutches and brakes. Wear 140: 291–308
Zagrodzki P, Lam KB, Al Bahkali E, Barber JR (2001) Nonlinear transient behaviour of a sliding system with frictionally excited thermoelastic instability. ASME J Tribol 123: 699–708
Jang YH, Ahn S (2007) Frictionally-excited thermoelastic instability in functionally graded material. Wear 262: 1102–1112
Ke L-L, Wang Y-S (2007) Two dimensional sliding frictional contact of functionally graded materials. Eur J Mech A 26: 171–188
Ma LF, Korsunsky AM (2004) Fundamental formulation for frictional contact problems of coated systems. Int J Solids Struct 41: 2837–2854
Erdogan F (1972) Fracture mechanics of functionally graded materials. MRS Bull 20: 43
Lee Woo Y, Stinton DP, Berndt CC, Erdogan F, Lee Yi-Der, Mutasim Z (1996) Concept of functionally graded materials for advanced thermal barrier coating applications. J Am Ceram Soc 79: 3003–3012
Pauk VJ (1994) Plane contact problem involving heat generation and radiation. J Theor Appl Mech 32: 829–839
Archard JF (1957) Elastic deformation and the laws of friction. Proc R Soc Lond A 243: 190–205
Nowacki W (1962) Thermoelasticity. Pergamon, London
Timoshenko SP, Goodier JN (1934) Theory of elasticity. McGraw-Hill, Maidenhead
Belotserkovskii M, Lifanov IK (1985) Numerical methods and singular integral equations. Nauka, Moscow
Erdogan F, Gupta GD (1972) On the numerical solution of singular integral equations. Quart Appl Math 29: 525–534
Grilitskii DV, Pauk VI (1997) The plane contact problem of steady thermoelasticity taking heat generation into account. J Appl Math Mech 61: 1007–1012
Afferrante L, Ciavarella M (2007) A note on thermoelastodynamic instability (TEDI) for a 1D elastic layer:. force control, Int J Solids Struct 44: 1380–1390
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Barik, S.P., Chaudhuri, P.K. Thermoelastic contact between a functionally graded elastic cylindrical punch and a half-space involving frictional heating. J Eng Math 76, 123–138 (2012). https://doi.org/10.1007/s10665-011-9526-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10665-011-9526-9