Abstract
DNA strand breaks are a common form of DNA damage that can contribute to chromosomal instability or gene mutations. Such strand breaks may be caused by exposure to heavy metals. The aim of this study was to assess the level of DNA strand breaks caused by µm-scale solid particles of known chemical composition with elevated heavy metals/metalloids, notably arsenic, using an in vitro cell-free DNA plasmid scission assay. These samples were incubated with and without H2O2 to see whether damage occurs directly or indirectly through the Fenton reaction. Levels of DNA damage in the absence of H2O2 were < 10%, but in the presence of H2O2, all samples showed higher levels of damage ranging from 10 to 100% suggesting that damage was being incurred through the Fenton reaction. Using bivariate correlation analysis and multiple linear regression, manganese oxide (MnO), sulphur (S), copper (Cu), and zinc (Zn) concentrations in the particulates were found to be the most significant predictors of DNA damage. The mechanism of this DNA damage formation has yet to be thoroughly investigated but is hypothesised to be due to reactive oxygen species formation. Further work is required to assess the extent of contribution of reactive oxygen species to this DNA damage, but this study highlights the potential role of chemistry and/or mineralogy to the extent and/or nature of DNA damage caused by particulates.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Heavy metals and metalloids are natural elements characterised by their high densities, atomic weights, or atomic numbers (Koller and Saleh 2018). Our natural environment contains a large number of heavy metals and metalloids, such as arsenic, cadmium, chromium, and nickel, that become sources of exposure to humans as a result of natural or anthropogenic processes (Alloway 2013; Tchounwou et al. 2012; Bhavani and Sujatha 2014).
It is well established that exposure to many heavy metals and metalloids causes adverse health effects in humans. Many heavy metals and metalloids are classified as human carcinogens by the International Agency for Research on Cancer (IARC 2018). A variety of signalling and cellular regulatory proteins that are involved in important processes such apoptosis, cell cycle regulation, DNA repair, DNA methylation, cell growth, and differentiation are affected by exposure to heavy metals and metalloids (Kim et al. 2015; Engwa et al. 2019). Any disruptions to these processes can lead to cancer (Engwa et al. 2019). The main mechanism of inducing these disruptions is oxidative stress. Certain heavy metals and metalloids, such as arsenic, iron, copper, chromium, cobalt, and vanadium, are known for their ability to produce reactive oxygen species (ROS) such as superoxide ion, hydrogen peroxide, and hydroxyl radical by utilising the Fenton chemistry/Haber–Weiss reaction (Jaishankar et al. 2014; Manoj and Padhy 2013; Szivák et al. 2009). Their production results in oxidative stress, a state where cells have elevated levels of reactive oxygen species (ROS), which causes damage to proteins (e.g. protein fragmentation), lipids (e.g. lipid peroxidation), and DNA (e.g. DNA strand breaks) (Schieber and Chandel 2014; Barrera 2012; Rehman et al. 2018; Engwa et al. 2019).
Given the known effects of exposure to heavy metals and metalloids, this study will focus on the effect of samples with known mineralogical, chemical, and physical characteristics on DNA strand breaks. The samples were collected from inside and around the Panasqueira mine area in Portugal and selected for the wide range of heavy metals/metalloids and major oxide composition. The overall objectives of this study were to (1) determine the level of DNA damage induced in the presence and absence of H2O2 using the plasmid scission assay and (2) identify the main determinants of DNA damage formation using bivariate correlation analysis and multiple linear regression.
Materials and methods
Rock samples were collected from in and around the Panasqueira mine, Portugal. After crushing, the resultant crushed rock powders (CRPs) were analysed by means of X-ray diffraction (XRD), X-ray fluorescence (XRF), and particle size analyser to investigate their mineralogical, chemical, and particle size characteristics, respectively. The ability of CRPs to cause DNA damage was investigated using an in vitro cell-free plasmid scission assay. A more detailed description of each method is provided below.
Sample collection
Whole-rock samples ranging from 0.5 to 1 kg in weight were collected from the Panasqueira mine area in Portugal in February/March 1984. Every sample was broken up with a carbide splitter and reduced to millimetre-sized particles in a jaw crusher. A portion of the crushed material was then placed in a Cr-V stainless steel Tema Mill (TEMA Machinery Ltd., Woodford Halse, Northants, UK) and further crushed to < 50 µm powders. Pressed powder pellets were then prepared by standard techniques as outlined in (Polya 1987, 1988). Throughout the whole process, every piece of equipment was thoroughly cleaned after each sample treatment. Around 250, crushed rock powders (CRPs) were eventually obtained and subsequently stored in sealed individual zip-bags at room temperature. For the purpose of this study, a subset of 24 samples were selected on the basis of their chemical compositional variability, particularly with respect to arsenic, to test their association with toxic effects.
XRD analysis
Sample preparation involved grinding ~ 0.1 g of crushed rock powder, mixing with ~ 1 ml of amyl acetate, using an agate pestle and mortar, transferring the resultant slurries to a glass microscope slide and air drying. Measurements were carried out on a Bruker D8 Advance diffractometer, equipped with a Göbel Mirror and a Lynxeye detector. The X-ray tube had a copper source, providing CuKα1 X-rays with a wavelength of 1.5406 Å. Samples were scanned from 5–70° to 2θ, with a step size of 0.02°–2θ and a count time of 0.2 s per step. The resultant XRD patterns were evaluated using EVA version 4, which compares experimental data to standards from the ICDD (International Centre for Diffraction Data) Database.
Particle size distribution
Particle size analysis was conducted at the British Geological Survey (BGS) in Keyworth by Thomas Walker (Walker, unpublished work). Each sample was weighed out into 2 vials of 0.25 g and suspended into 10 ml solution of Calgon (25% sodium hexametaphosphate). The samples were then shaken and mixed for 30 s using a vortex mixer at 2500 rpm before being analysed using a Beckman Coulter LS 13 320 Particle Sizing Analyser. Each sample was analysed twice. Each resultant particle size distribution was characterised by five parameters [P1 (% 100 µm peak), P2 (% 10 µm peak), and P3 (% < 1 µm), D10, D50,] chosen based on their ability to describe the sample as a whole or describe the largest fraction peak (100 µm), the modal fraction (10 µm), and the nanoparticle fraction (less than one µm). D10 is the diameter at which 10% of a sample’s mass is comprised of smaller particles, while D50 is the diameter at which 50% of a sample’s mass is comprised of smaller particles. Both D10 and D50 values were calculated from the distribution, and statistical analysis was conducted using Gradistat© software on Microsoft Excel (Walker, unpublished).
Plasmid scission assay
The ability of CRPs to cause DNA strand breaks was investigated using the plasmid scission assay as described previously (Dumax-Vorzet et al. 2015) with minor modifications. When plasmid DNA runs through an agarose gel, three bands are observed. Supercoiled plasmid DNA is the native form (covalently closed circular DNA) where there are no strand breaks. When one DNA strand is cut, the resulting nicked or relaxed plasmid DNA will have a floppy open circle structure. When both strands of the plasmid are cut, the result is linear plasmid DNA. These three forms have different migration speeds where supercoiled plasmid DNA is the fastest as it does not have any strand breaks and its compactness sustains less friction against the agarose gel. Linear plasmid DNA runs through the gel slower than supercoiled plasmid DNA but faster than nicked or relaxed plasmid DNA. Nicked or relaxed plasmid DNA is the slowest due to its large floppy circular nature. In brief, pchAT plasmid DNA (kindly provided by Prof. Geoff Margison, purified from E.coli in lab using Miniprep (Qiagen, The Netherlands)) (5 ng) was diluted to 20 μl in an elution buffer (10 mM Tris–HCl pH 8.5) with different levels of CRPs and H2O2. Samples were incubated for 1–5 h at 37 °C. The reaction was stopped by adding loading buffer (Promega blue/orange 6 × loading dye) and the whole reaction mixture loaded onto 0.6% TBE-agarose gel. Electrophoresis was conducted at 90–100 V for 45 min–2 h in 1 × TBE buffer. The different forms of plasmid were visualised on a Typhoon 9200 variable mode imager. The intensity of the different forms of plasmid in each lane was analysed using ImageQuantTL (GE Healthcare Life Sciences), and the level of damaged plasmid in each sample was calculated as shown in Eq. (1).
where DP is the percentage of DNA damage, R is the relaxed form of plasmid DNA, L is the linear form of plasmid DNA, and S is the supercoiled form of plasmid DNA.
In each experiment, positive and negative controls were added. The positive control was H2O2 (3.5 mM), pchAT plasmid DNA (5 ng), and FeSO4 (25 µM) in elution buffer. The negative control was H2O2 (3.5 mM) and pchAT plasmid DNA (5 ng) diluted in elution buffer.
Statistical analysis
Data obtained from each plasmid scission assay were described using the mean, standard deviation, minimum, and maximum values. A one-way analysis of variance was used to compare each group individually to determine whether the levels of DNA strand breaks varied significantly between samples. A bivariate correlation analysis was then conducted to examine possible associations between DNA strand breaks and the physiochemical composition of the samples. All the significant variables from this analysis were then plotted against the percentage of DNA strand breaks to examine the correlations and entered into a backward stepwise multiple linear regression model. The least significant variable was eliminated step by step, and all the models were compared using Bayesian Information Criterion (BIC) to choose the best explanatory model. Statistical analyses were performed using SPSS Statistics version 22. Graphs and scatterplots were created using Microsoft Excel 2010.
Results
XRD analysis
The crystalline minerals identified by XRD in the CRPs were mostly silicates with minor sulphides. These included quartz, muscovite 2M1, dravite tourmaline, and albite (Tables 1, 2 in supplementary material). The most abundant crystalline minerals found were quartz (Modal abundance = 40%, SD = 17%), muscovite 2M1 (M = 32%, SD = 19%), and dravite tourmaline (M = 11%, SD = 16%) with lesser amounts of albite (M = 9%, SD = 12%), phlogopite 1 M mica (M = 4%, SD = 8%), clinochlore II2b (M = 3%, SD = 5%), and traces of microcline intermediate 1, magnetite, and pyrite. (Tables 1, 2 in supplementary material).
XRF analysis
The chemical compositions of the CRPs are summarised in Tables 3, 4, 5 and 6 of Supplementary Material. The compositions of these largely lower Greenschist facies meta-silstones and meta-sandstones are dominated by SiO2 (M = 63%, SD = 8%), Al2O3 (M = 19%, SD = 5%), and Fe2O3 (M = 7%, SD = 2%). Notable traces included S (M = 1600 µg/g, SD = 3800 µg/g), Ba (M = 560 µg/g, SD = 250 µg/g), and As (M = 380 µg/g, SD = 650 µg/g).
Particle size distribution
The analysis showed that samples were very similar in terms of their size distribution (Table 7 in supplementary material). The model fraction P2 (% 10 µm peak) was the most abundant fraction (M = 25.6, SD = 5). The largest fraction P1 (% 100 µm peak) was the second most abundant (M = 13.4, SD = 5.2). The nanoparticle fraction P3 (% < 1 µm) was only present in small amounts (M = 0.8, SD = 0.8). (Table 8 in supplementary material).
Plasmid scission assay
Hydrogen peroxide (H2O2) alone did not induce substantial strand breaks, but in combination with increasing FeSO4 concentration, there was a dose-dependent increase in the proportion of damaged plasmid (Fig. 1). Negative controls (i.e. without particulates or FeSO4) gave rise to DNA damage of less than 10%, with this damage being independent of H2O2 concentration over the range 0–200 µM H2O2. These small levels of DNA damage are similar to those observed in earlier studies using this technique (Dumax-Vorzet et al. 2015), and we speculate reflect small amounts of damage caused by the DNA extraction procedure or during the incubation period.
Production of DNA strand breaks by H2O2 and FeSO4. a electrophoresis results, b %DNA damage induced by increasing amounts of H2O2)—pchAT plasmid DNA was incubated at 37 °C for 1 h with 0-200 μM H2O2 in elution buffer (10 mM Tris–HCl pH 8.5) (20 μl). c Electrophoresis results, d % DNA damage induced by increasing amounts of FeSO4 in the presence of H2O2)—pchAT plasmid DNA was incubated at 37 °C for 1 h with 3.5 mM H2O2 and increasing concentration of FeSO4 (0–25 µM). Both reactions were stopped by the addition of loading buffer (Promega blue/orange 6 × loading dye). The samples were separated on 0.6% TBE-agarose gel at 90 V for 2 h. The different forms of plasmid were visualised on a Typhoon 9200 variable mode imager. The intensity of the different forms of plasmid (relaxed, linear, and supercoiled) in each lane was analysed using ImageQuantTM, and the level of damaged plasmid in each sample was calculated. Error bars represent the standard deviation (SD) of three independent experiments
The addition of increasing amounts of CRPs to a reaction mix containing, pchAT plasmid DNA, H2O2, and elution buffer resulted in a dose-dependent increase in the proportion of damaged plasmid (Fig. 2).
Production of DNA strand breaks by increasing amounts of CRPs (100–1250 µg/ml). a–c % DNA damage induced by increasing amounts of CRPs in the presence of H2O2 for three representative samples E, G, and K). Samples were suspended in distilled water (5 mg/ml) by sonication for a total of 3 min. Sonication was performed at 80% amplitude. The samples were used directly after being suspended without centrifugation. Plasmid DNA (5 ng) was incubated at 37 °C for 5 h with 3.5 mM H2O2 and increasing concentrations (100 μg/ml–1250 μg/ml) of the CRPs. (d % DNA damage induced by negative and positive controls) positive [FeSO4 25 µM, plasmid DNA (5 ng), H2O2 3.5 mM, and elution buffer (10 mM Tris–HCl pH 8.5)] and negative [plasmid DNA (5 ng), H2O2 3.5 mM, and elution buffer (10 mM Tris–HCl pH 8.5)] controls were also added. The reaction was stopped by the addition of loading buffer (Promega blue/orange 6 × loading dye). The samples were separated on 0.6% TBE-agarose gel at 100 V for 45 min. Three independents were carried out, and the mean for each sample was calculated. Error bars represent the standard deviation (SD) of three independent experiments
For samples incubated at the highest concentration of CRP (1250 µg/ml), the percentage of DNA strand breaks found in the absence of H2O2 was between 0 and 10%. However, when the samples were incubated with H2O2, the percentage of DNA strand breaks increased to between 10 and 100% depending upon the sample (Fig. 3). When comparing the percentage of DNA damage in the two groups (with and without H2O2), a significant difference was found for all samples using a paired samples t test (Table 9 in supplementary material). Also, when comparing the percentage of DNA damage within each group individually, a significant difference was found using a one-way analysis of variance (with H2O2 p < 0.001/without H2O2 p < 0.001).
Production of DNA strand breaks by CRPs. (a % DNA damage induced by 1250 μg/ml of all CRPs in the presence of H2O2). Samples were suspended in distilled water (5 mg/ml) by sonication for a total of 3 min. Sonication was performed at 80% amplitude. The samples were used directly after being suspended without centrifugation. pchAT Plasmid DNA was incubated at 37 °C for 5 h with and without H2O2 at the highest concentration of the sample. (b % DNA damage induced by negative and positive controls) positive [FeSO4 25 µM, plasmid DNA (5 ng), H2O2 3.5 mM, and elution buffer (10 mM Tris–HCl pH 8.5)] and negative [plasmid DNA (5 ng), H2O2 3.5 mM, and elution buffer (10 mM Tris–HCl pH 8.5)] controls were also added. The reaction was stopped by the addition of loading buffer. The samples were separated on 0.6% TBE-agarose gel at 100 V for 45 min. Six independent experiments were carried out, and the mean for each sample was calculated. Error bars represent the standard deviation (SD) of six independent experiments
The percentage of plasmid DNA damage in the presence of H2O2 was correlated with MnO, P2O5, Rb, S, Cu, Zn, Mo, Sn, and W as well as Sn, Ni, Bi, and dravite tourmaline but to a lesser extent (Fig. 4). None of the particle size distribution parameters were correlated with the percentage of plasmid DNA damage. In a multiple linear regression model, MnO (β = 0.541, p < 0.000), S (β = 1.170, p < 0.002), Cu (β = − 0.761, p < 0.031), and Zn (β = 0.253, p < 0.035) were significant predictors of the percentage of DNA damage. These elements combined explained 83% of the variance (R2 = 0.834, p < 0.001). In the absence of H2O2, no correlation was found between the percentage of DNA damage and the physiochemical composition of the samples.
Discussion
All samples collected from inside and around the Panasqueira mine area were able to induce DNA damage when incubated as a CRP with plasmid DNA in the presence of H2O2. The percentage of plasmid DNA damage varied significantly with MnO, S, Cu, and Zn, these chemical components also being significant predictors of DNA damage in a multivariate model. To the best of knowledge, this is the first study to determine direct apparent effects of MnO, S, Cu, and Zn in CRPs in a cell-free DNA scission assay, although it is noted that the large degree of covariance of these compositional parameters with other compositional parameters means that the DNA damage cannot be uniquely ascribed to each of these components and this represents a fundamental limitation of such toxicological studies involving real multicomponent geological materials. Previous studies have reported associations between these chemical components and DNA damage in cell-based studies (Alarifi et al. 2017; Frick et al. 2011; Hoffman et al. 2012; Linder 2012; Cervantes–Cervantes et al. 2005; Arciello et al. 2005; Zyba et al. 2016; Sharif et al. 2012; Ho and Ames 2002; Ho et al. 2003; Wysokinski et al. 2012). Manganese oxide nanoparticles have been associated with DNA strand breaks in human neuronal cells (Alarifi et al. 2017), and type-II alveolar epithelial cells (Frick et al. 2011). Sulphur (Hoffman et al. 2012) and copper (Linder 2012; Cervantes–Cervantes et al. 2005; Arciello et al. 2005) have been associated with superoxide and hydroxyl radicals which can result in oxidative stress and can lead to DNA damage. An increase in dietary zinc is actually known to reduce DNA damage (Zyba et al. 2016). Zinc deficiency on the other hand induces oxidative stress which leads to DNA damage (Sharif et al. 2012; Ho et al. 2003; Ho and Ames 2002). However, it has been reported before that zinc behaves differently in normal cells and cancer cells. Wysokinski et al. (2012) found that cancer cells exhibited higher levels of DNA damage in the presence of zinc, while in normal lymphocytes, such an effect was not found (Wysokinski et al. 2012). In this study, zinc levels were associated with an increase in DNA damage.
It has been previously reported that arsenic causes DNA strand breaks in mouse lungs (Yamanaka and Okada 1994), human fibroblasts (Mourón et al. 2006), and human HeLa S3 cells (Schwerdtle et al. 2003). However, in our study, we found no significant linear association between arsenic concentrations and DNA strand breaks, notwithstanding that the CRPs contained up to 3000 µg/g As. The lack of association between arsenic and DNA damage could have been attributed to its insolubility in a wide range of pH conditions (Flora 2014). Moreover, certain contaminants need to be converted from their original form by enzymes first in the human body to show any adverse effects. That especially applies for arsenic as its metabolism is a critical determinant of its toxic effects (Navas-Acien and Guallar 2008; Hughes et al. 2011; Jomova et al. 2011). This could be why arsenic was not found in this study to be associated with DNA damage as the assay was cell-free, while in the other previously mentioned studies, the assays were cell-based.
Conclusion
Crushed rock powders of known chemical composition have been shown to induce variable levels of DNA damage in a cell-free assay. MnO, S, Cu, and Zn were significant predictors of this DNA damage. Further work is required to characterise the mechanism of DNA damage formation and to determine to what extent these cell-free studies correlate with cellular studies. In particular, the perhaps surprising lack of association of DNA damage with arsenic concentration in the crushed rock powders highlights how cell-free assays may not be representative of toxicity behaviour in human cells, but the assays nevertheless confirm that the toxicity of µm-scale particles may be strongly dependent upon their chemical and mineralogical composition.
References
Alarifi, S., Ali, D., & Alkahtani, S. (2017). Oxidative stress-Induced DNA damage by manganese dioxide nanoparticles in human neuronal cells. BioMed Research International. Article ID: 5478790.
Alloway, B. J. (2013). Sources of heavy metals and metalloids in soils. In B. J. Alloway (Ed.), Heavy metals in soils and their bioavailability (pp. 11–50). New York: Springer.
Arciello, M., Rotilio, G., & Rossi, L. (2005). Copper-dependent toxicity in SH-SY5Y neuroblastoma cells involves mitochondrial damage. Biochemical and Biophysical Research Communications, 327(2), 454–459.
Barrera, G. (2012). Oxidative stress and lipid peroxidation products in cancer progression and therapy. ISRN Oncology. Article No. 137289, https://doi.org/10.5402/2012/137289.
Bhavani, P., & Sujatha, B. (2014). Impact of toxic metals leading to environmental pollution. Journal of Chemical and Pharmaceutical Sciences, 3, 70–72.
Cervantes-Cervantes, M. P., Calderón-Salinas, J. V., Albores, A., & Muñoz-Sánchez, J. L. (2005). Copper increases the damage to DNA and proteins caused by reactive oxygen species. Biological Trace Element Research, 103(3), 229–248.
Dumax-Vorzet, A. F., Tate, M., Walmsley, R., Elder, R. H., & Povey, A. C. (2015). Cytotoxicity and genotoxicity of urban particulate matter in mammalian cells. Mutagenesis, 30(5), 621–633.
Engwa, G. A., Ferdinand, P. U., Nwalo, F. N., & Unachukwu, M. N. (2019). Mechanism and health effects of heavy metal toxicity in humans. In Poisoning in the modern world-new tricks for an old dog? IntechOpen.
Flora, S. J. S. (2014). Handbook of arsenic toxicology. London: Academic Press.
Frick, R., Müller-Edenborn, B., Schlicker, A., Rothen-Rutishauser, B., Raemy, D. O., Günther, D., et al. (2011). Comparison of manganese oxide nanoparticles and manganese sulfate with regard to oxidative stress, uptake and apoptosis in alveolar epithelial cells. Toxicology Letters, 205(2), 163–172.
Ho, E., & Ames, B. N. (2002). Low intracellular zinc induces oxidative DNA damage, disrupts p53, NFκB, and AP1 DNA binding, and affects DNA repair in a rat glioma cell line. Proceedings of the National Academy of Sciences, 99(26), 16770–16775.
Ho, E., Courtemanche, C., & Ames, B. N. (2003). Zinc deficiency induces oxidative DNA damage and increases p53 expression in human lung fibroblasts. The Journal of nutrition, 133(8), 2543–2548.
Hoffman, M., Rajapakse, A., Shen, X., & Gates, K. S. (2012). Generation of DNA-damaging reactive oxygen species via the autoxidation of hydrogen sulfide under physiologically relevant conditions: Chemistry relevant to both the genotoxic and cell signaling properties of H2S. Chemical Research in Toxicology, 25(8), 1609–1615.
Hughes, M. F., Beck, B. D., Chen, Y., Lewis, A. S., & Thomas, D. J. (2011). Arsenic exposure and toxicology: A historical perspective. Toxicological Sciences, 123(2), 305–332.
IARC. (2018). List of classifications (Vol. 1–122). https://monographs.iarc.fr/list-of-classifications-volumes/28/08/2018.
Jaishankar, M., Tseten, T., Anbalagan, N., Mathew, B. B., & Beeregowda, K. N. (2014). Toxicity, mechanism and health effects of some heavy metals. Interdisciplinary Toxicology, 7(2), 60–72.
Jomova, K., Jenisova, Z., Feszterova, M., Baros, S., Liska, J., Hudecova, D., et al. (2011). Arsenic: Toxicity, oxidative stress and human disease. Journal of Applied Toxicology, 31(2), 95–107.
Kim, H. S., Kim, Y. J., & Seo, Y. R. (2015). An overview of carcinogenic heavy metal: Molecular toxicity mechanism and prevention. Journal of Cancer Prevention, 20(4), 232.
Koller, M., & Saleh, H. M. (2018). Introductory chapter: Introducing heavy metals. Heavy Metals, 1, 3–11.
Linder, M. C. (2012). The relationship of copper to DNA damage and damage prevention in humans. Mutation Research/Fundamental and Molecular Mechanisms of Mutagenesis, 733(1–2), 83–91.
Manoj, K., & Padhy, P. (2013). Oxidative stress and heavy metals: An appraisal with reference to environmental biology. International Research Journal of Biological Sciences, 2, 91–101.
Mourón, S. A., Grillo, C. A., Dulout, F. N., & Golijow, C. D. (2006). Induction of DNA strand breaks, DNA-protein crosslinks and sister chromatid exchanges by arsenite in a human lung cell line. Toxicology in Vitro, 20(3), 279–285.
Navas-Acien, A., & Guallar, E. (2008). Measuring arsenic exposure, metabolism, and biological effects: The role of urine proteomics. Toxicological Sciences, 106(1), 1–4.
Polya, D. A. (1987). Chemical behaviour of tungsten in hydrothermal fluids AND Genesis of the Panasqueira W–Cu–Sn deposit, Portugal. Unpublished PhD thesis, University of Manchester, UK.
Polya, D. A. (1988). Efficiency of hydrothermal ore formation and the Panasqueira W–Cu (Ag)–Sn vein deposit. Nature, 333(6176), 838.
Rehman, K., Fatima, F., Waheed, I., & Akash, M. S. H. (2018). Prevalence of exposure of heavy metals and their impact on health consequences. Journal of Cellular Biochemistry, 119(1), 157–184.
Schieber, M., & Chandel, N. S. (2014). ROS function in redox signaling and oxidative stress. Current Biology, 24(10), R453–R462.
Schwerdtle, T., Walter, I., Mackiw, I., & Hartwig, A. (2003). Induction of oxidative DNA damage by arsenite and its trivalent and pentavalent methylated metabolites in cultured human cells and isolated DNA. Carcinogenesis, 24(5), 967–974.
Sharif, R., Thomas, P., Zalewski, P., & Fenech, M. (2012). Zinc deficiency or excess within the physiological range increases genome instability and cytotoxicity, respectively, in human oral keratinocyte cells. Genes & Nutrition, 7(2), 139.
Szivák, I., Behra, R., & Sigg, L. (2009). Metal-induced reactive oxygen species production in Chlamydomonas reinhardtii (Chlorophyceae) 1. Journal of Phycology, 45(2), 427–435.
Tchounwou, P. B., Yedjou, C. G., Patlolla, A. K., & Sutton, D. J. (2012). Heavy metal toxicity and the environment. In A. Luch (Ed.), Molecular, clinical and environmental toxicology (pp. 133–164). New York: Springer.
Wysokinski, D., Blasiak, J., & Wozniak, K. (2012). Zinc differentially modulates DNA damage induced by anthracyclines in normal and cancer cells. Experimental Oncology, 34(4), 327–331.
Yamanaka, K., & Okada, S. (1994). Induction of lung-specific DNA damage by metabolically methylated arsenics via the production of free radicals. Environmental Health Perspectives, 102(suppl 3), 37–40.
Zyba, S. J., Shenvi, S. V., Killilea, D. W., Holland, T. C., Kim, E., Moy, A., et al. (2016). A moderate increase in dietary zinc reduces DNA strand breaks in leukocytes and alters plasma proteins without changing plasma zinc concentrations. The American Journal of Clinical Nutrition, 105(2), 343–351.
Acknowledgements
HB acknowledges financial support from the Government of the Kingdom of Saudi Arabia. DP acknowledges the support of a Royal Commission for the Exhibition of 1851 PhD Scholarship (1983–1985) and the kind efforts of P. K. Harvey and B. P. Atkin with XRF analysis which was conducted at the then Natural Environment Research Council funded facility at the University of Nottingham. The authors would like to thank Mr Liam Hanson for his kind assistance with the Plasmid Scission Assay, Geoff Margison for the plasmid, Jon Waters for assistance and advice on XRD, and Thomas Walker for carrying out the particle size distribution analysis at the British Geological Survey (Keyworth)—we are grateful to Oliver Kuras for providing access to that facility. We thank two anonymous reviewers for comments that improved the clarity of the manuscript.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Appendix: Supplementary material
Appendix: Supplementary material
See Tables 1, 2, 3, 4, 5, 6, 7, 8, and 9.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Badri, H., Polya, D.A. & Povey, A.C. Geochemical compositional controls on DNA strand breaks induced in in vitro cell-free assays by crushed rock powders from the Panasqueira mine area, Portugal. Environ Geochem Health 43, 2631–2647 (2021). https://doi.org/10.1007/s10653-020-00653-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10653-020-00653-9