Abstract
The use of natural fibers in cement-based building materials has become an emerging field in the building and construction industry. Natural plant fibers are green, sustainable, and low-cost renewable resources that can be found in all parts of the world. Besides their biodegradability, studies have also established that the natural fibers also positively impacted the mechanical properties of the resulting composites. However, their utilization has also presented some challenges due to their high-water absorption, limited tensile strength, and open surface morphology that is exposed to cement hydration products and microbial degradation. Also, the fiber-cement matrix bonding and adhesion is another challenge limiting natural fiber utilization. Successful research on these challenges has been conducted and improvements were observed for the fiber-matrix adhesion and durability. Thus, herein we critically review the articles, discuss the science behind the treatment methods and suggest some intriguing issues for further investigation.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Ali M, Chouw N (2013) Experimental investigations on coconut-fibre rope tensile strength and pullout from coconut fibre reinforced concrete. Constr Build Mater 41:681–690. https://doi.org/10.1016/j.conbuildmat.2012.12.052
Ballesteros JEM, Mármol G, Filomeno R, Rodier L, Savastano H Jr, Fiorelli J (2019) Synergic effect of fiber and matrix treatments for vegetable fiber reinforced cement of improved performance. Constr Build Mater 205:52–60. https://doi.org/10.1016/j.conbuildmat.2019.02.007
Barra BN, Santos SF, Bergo PVA, Alves C Jr, Ghavami K, Savastano H Jr (2015) Residual sisal fibers treated by methane cold plasma discharge for potential application in cement based material. Ind Crops Prod 77:691–702. https://doi.org/10.1016/j.indcrop.2015.07.052
Bilba K, Ouensanga A (1996) Fourier transform infrared spectroscopic study of thermal degradation of sugar cane bagasse. J Anal Appl Pyrol 38(1–2):61–73
Carlsson GCM, Stroem G (1991) Reduction and oxidation of cellulose surfaces by means of cold plasma. Langmuir 7(11):2492–2497. https://doi.org/10.1021/la00059a016
Chakraborty S, Kundu SP, Roy A, Adhikari B, Majumder SB (2013) Polymer modified jute fibre as reinforcing agent controlling the physical and mechanical characteristics of cement mortar. Constr Build Mater 49:214–222. https://doi.org/10.1016/j.conbuildmat.2013.08.025
Claramunt J, Ardanuy M, García-Hortal JA, Filho RDT (2011) The hornification of vegetable fibers to improve the durability of cement mortar composites. Cement Concrete Compos 33(5):586–595. https://doi.org/10.1016/j.cemconcomp.2011.03.003
Claramunt J, Fernández-Carrasco LJ, Ventura H, Ardanuy M (2016) Natural fiber nonwoven reinforced cement composites as sustainable materials for building envelopes. Constr Build Mater 115:230–239. https://doi.org/10.1016/j.conbuildmat.2016.04.044
Curling SF, Clausen CA, Winandy JE (2002) Relationships between mechanical properties, weight loss, and chemical composition of wood during incipient Brown-Rot decay. For Prod J 52(7–8):34–39. https://doi.org/10.1016/S1389-9341(02)00003-5
Dash BN, Rana AK, Mishra SC (2000) Novel low-cost jute–polyester composite. II. SEM observation of the fracture surfaces. Polym Plast Technol Eng 39:333–350
Ferreira SR, De Andrade Silva F, Lima PRL, Filho RDT (2015) Effect of fiber treatments on the sisal fiber properties and fiber-matrix bond in cement based systems. Constr Build Mater 101:730–740. https://doi.org/10.1016/j.conbuildmat.2015.10.120
Finkelstein MM (2019) A comparison of asbestos fiber potency and elongate mineral particle (EMP) potency for mesothelioma in humans. Toxicol Appl Pharmacol 371(March):1–2. https://doi.org/10.1016/j.taap.2019.03.023
Izaguirre A, Lanas J, Alvarez JI (2011) Effect of a polypropylene fibre on the behaviour of aerial lime-based mortars. Constr Build Mater 25(2):992–1000. https://doi.org/10.1016/j.conbuildmat.2010.06.080
Javadian A, Wielopolski M, Smith IFC, Hebel DE (2016) Bond-behavior study of newly developed bamboo-composite reinforcement in concrete. Constr Build Mater 122:110–117. https://doi.org/10.1016/j.conbuildmat.2016.06.084
Jiang D, Cui S, Xu F, Tuo T (2015) Impact of leaf fibre modification methods on compatibility between leaf fibres and cement-based materials. Constr Build Mater 94:502–512. https://doi.org/10.1016/j.conbuildmat.2015.07.045
Kabir MM, Wang H, Lau KT, Cardona F (2012) Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview. Compos B Eng 43(7):2883–2892. https://doi.org/10.1016/j.compositesb.2012.04.053
Khandelwal S, Rhee KY (2020) Recent advances in basalt-fiber-reinforced composites: tailoring the fiber-matrix interface. Compos B 192(November 2019):108011. https://doi.org/10.1016/j.compositesb.2020.108011
Kim JH, Liu G, Kim SH (2006) Deposition of stable hydrophobic coatings with in-line CH4 atmospheric Rf plasma. J Mater Chem 16(10):977–981. https://doi.org/10.1039/b516329c
Lan W (2005) Application of cement concrete composition properties
Lawan I, Qiang L, Yuan Z (2018) Modifications of hemp twine for use as a fiber in cement composite: effects of hybrid treatments. Cellulose 25(3):2009–2020. https://doi.org/10.1007/s10570-018-1668-8
Li X, Tabil LG, Panigrahi S (2007) Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. J Polym Environ 15(1):25–33. https://doi.org/10.1007/s10924-006-0042-3
Lima PRL, Ferreira SR, Silva FA, Toledo Filho RD (2012) Effect of sisal fiber hornification on the adhesion with portland cement matrices. Revista Matéria 17(2):1024–1034. https://doi.org/10.1590/S1517-70762012000200008
Ming L, Zhou S, Guo X (2017) Effects of alkali-treated bamboo fibers on the morphology and mechanical properties of oil well cement. Constr Build Mater 150:619–625. https://doi.org/10.1016/j.conbuildmat.2017.05.215
Morán JI, Alvarez VA, Cyras VP, Vázquez A (2008) Extraction of cellulose and preparation of nanocellulose from sisal fibers. Cellulose 15(1):149–159. https://doi.org/10.1007/s10570-007-9145-9
Morton JH, Cooke T, Akers SAS (2010) Performance of slash pine fibers in fiber cement products. Constr Build Mater 24(2):165–170. https://doi.org/10.1016/j.conbuildmat.2007.08.015
Narendar R, Priya Dasan K (2014) Chemical treatments of coir pith: morphology, chemical composition, thermal and water retention behavior. Compos B Eng 56:770–779. https://doi.org/10.1016/j.compositesb.2013.09.028
Onésippe C, Passe-Coutrin N, Toro F, Delvasto S, Bilba K, Arsène M-A (2010) Sugar cane bagasse fibres reinforced cement composites: thermal considerations. Compos A Appl Sci Manuf 41(4):549–556. https://doi.org/10.1016/j.compositesa.2010.01.002
Pickering KL, Aruan Efendy MG, Le TM (2016) A review of recent developments in natural fibre composites and their mechanical performance. Compos A Appl Sci Manuf 83:98–112. https://doi.org/10.1016/j.compositesa.2015.08.038
Saikia N, De Brito J (2012) Use of plastic waste as aggregate in cement mortar and concrete preparation: a review. Constr Build Mater 34:385–401. https://doi.org/10.1016/j.conbuildmat.2012.02.066
Sawpan MA, Pickering KL, Fernyhough A (2011) Effect of various chemical treatments on the fibre structure and tensile properties of industrial hemp fibres. Compos A Appl Sci Manuf 42(8):888–895. https://doi.org/10.1016/j.compositesa.2011.03.008
Sedan D, Pagnoux C, Smith A, Chotard T (2008) Mechanical properties of hemp fibre reinforced cement: influence of the fibre/matrix interaction. J Eur Ceram Soc 28(1):183–192. https://doi.org/10.1016/j.jeurceramsoc.2007.05.019
Sepe R, Bollino F, Boccarusso L, Caputo F (2018) Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites. Compos B Eng 133:210–217. https://doi.org/10.1016/j.compositesb.2017.09.030
Snoeck D, Smetryns PA, De Belie N (2015) Improved multiple cracking and autogenous healing in cementitious materials by means of chemically-treated natural fibres. Biosyst Eng 139(1998):87–99. https://doi.org/10.1016/j.biosystemseng.2015.08.007
Sreekala MS, Thomas S (2003) Effect of fibre surface modification on water-sorption characteristics of oil palm fibres. Compos Sci Technol 63(6):861–869. https://doi.org/10.1016/S0266-3538(02)00270-1
Sreekala MS, Kumaran MG, Joseph S (2000) Oil palm fibers reinforced phenol formaldehyde composites: influence of fibers surface modifications on the mechanical performance. Appl Compos Mater 7(5–6):295–329. https://doi.org/10.1023/A:1026534006291
Tian H, Zhang YX (2016) The influence of bagasse fibre and fly ash on the long-term properties of green cementitious composites. Constr Build Mater 111:237–250. https://doi.org/10.1016/j.conbuildmat.2016.02.103
Tonoli GHD, Savastano H Jr, Fuente E (2010) Eucalyptus pulp fibres as alternative reinforcement to engineered cement-based composites. Ind Crops Prod 31:225–232. https://doi.org/10.1016/j.indcrop.2009.10.009
Tonoli GHD, Belgacem MN, Siqueira G (2013) Processing and dimensional changes of cement based composites reinforced with surface-treated cellulose fibres. Cement Concrete Compos 37(1):68–75. https://doi.org/10.1016/j.cemconcomp.2012.12.004
Turatsinze A, Garros M (2008) On the modulus of elasticity and strain capacity of self-compacting concrete incorporating rubber aggregates. Resources Conserv Recycl 52(10):1209–1215. https://doi.org/10.1016/j.resconrec.2008.06.012
Uthaman N, Majeed A, Pandurangan (2006) Impact modification of polyoxymethylene (POM). E-Polymers. https://doi.org/https://doi.org/10.1515/epoly.2006.6.1.438
Wei J, Meyer C (2014a) Degradation rate of natural fiber in cement composites exposed to various accelerated aging environment conditions. Corros Sci 88:118–132. https://doi.org/10.1016/j.corsci.2014.07.029
Wei J, Meyer C (2014b) Improving degradation resistance of sisal fiber in concrete through fiber surface treatment. Appl Surf Sci 289:511–523. https://doi.org/10.1016/j.apsusc.2013.11.024
Witomski P, Olek W, Bonarski JT (2016) Changes in strength of scots pine wood (Pinus silvestris L.) decayed by Brown Rot (Coniophora puteana) and White Rot (Trametes versicolor). Constr Build Mater 102:162–166. https://doi.org/10.1016/j.conbuildmat.2015.10.109
Zukowski B, de Andrade Silva F, Filho RDT (2018) Design of strain hardening cement-based composites with alkali treated natural Curauá fiber. Cement Concrete Compos 89:150–159. https://doi.org/10.1016/j.cemconcomp.2018.03.006
Acknowledgments
The funding provided by the Fujian Agriculture and Forestry University (KXB16001A) and the Department of Science and Technology of Fujian Province (2017H6003), PR China is hereby acknowledged.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors have no conflict of interest with regards to the submission and publication of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, Q., Ibrahim, L., Zhou, W. et al. Treatment methods for plant fibers for use as reinforcement in cement-based materials. Cellulose 28, 5257–5268 (2021). https://doi.org/10.1007/s10570-021-03903-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-021-03903-w