Abstract
In this work lignocellulosic fibers were obtained from Yucca aloifolia L. leaves and their chemical, morphological, thermal and mechanical properties were studied. The fibers were pullout from the leaves and characterized by infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), chemical characterization, thermogravimetric analysis (TGA), single fiber tensile tests and scanning electron microscopy (SEM). The cellulose crystallinity index found was 69.43%. The fibers presented a high cellulose content, ~ 52.5%, and they are thermally stable until 193.4 °C. The tensile test for single fibers showed average results for the tensile strength of 800 MPa, Young's modulus of 39 GPa, and 2% strain at failure. Morphological analysis indicated the presence of a large number of parenchymal cells and not cellulosic constituents in fiber surface. These results indicated that Yucca aloifolia L. fibers have potential to application in polymeric matrices as fibrous reinforcement material.
Graphic abstract
Similar content being viewed by others
References
Achinivu EC (2018) Protic ionic liquids for lignin extraction—a lignin characterization study. Int J Mol Sci. https://doi.org/10.3390/ijms19020428
Albers F, Meve U (2001) Illustrated handbook of succulent plants: monocotyledons, 1st edn. Springer, Berlin, Heidelberg
Al-Oqla FM (2017) Investigating the mechanical performance deterioration of Mediterranean cellulosic cypress and pine/polyethylene composites. Cellulose 24:2523–2530. https://doi.org/10.1007/s10570-017-1280-3
Al-Oqla FM (2020) Flexural characteristics and impact rupture stress investigations of sustainable green olive leaves bio-composite materials. J Polym Environ. https://doi.org/10.1007/s10924-020-01889-3
Al-Oqla FM, El-Shekeil YA (2019) Investigating and predicting the performance deteriorations and trends of polyurethane bio-composites for more realistic sustainable design possibilities. J Clean Prod 222:865–870. https://doi.org/10.1016/j.jclepro.2019.03.042
Alves Fidelis ME, Pereira TVC, Gomes ODFM et al (2013) The effect of fiber morphology on the tensile strength of natural fibers. J Mater Res Technol 2:149–157. https://doi.org/10.1016/j.jmrt.2013.02.003
ASTM International (2013) ASTM C1557, 2003, standard test method for tensile strength and Young’s modulus of fibres. ASTM. https://doi.org/10.1520/C1557-14.2
Balaji AN, Nagarajan KJ (2017) Characterization of alkali treated and untreated new cellulosic fiber from Saharan aloe vera cactus leaves. Carbohydr Polym 174:200–208. https://doi.org/10.1016/j.carbpol.2017.06.065
Baskaran PG, Kathiresan M, Senthamaraikannan P, Saravanakumar SS (2018) Characterization of new natural cellulosic fiber from the bark of Dichrostachys Cinerea. J Nat Fibers 15:62–68. https://doi.org/10.1080/15440478.2017.1304314
Belouadah Z, Ati A, Rokbi M (2015) Characterization of new natural cellulosic fiber from Lygeum spartum L. Carbohydr Polym 134:429–437. https://doi.org/10.1016/j.carbpol.2015.08.024
Ben Sghaier AEO, Chaabouni Y, Msahli S, Sakli F (2012) Morphological and crystalline characterization of NaOH and NaOCl treated Agave americana L. fiber. Ind Crops Prod 36:257–266. https://doi.org/10.1016/j.indcrop.2011.09.012
Boukir A, Fellak S, Doumenq P (2019) Structural characterization of Argania spinosa Moroccan wooden artifacts during natural degradation progress using infrared spectroscopy (ATR-FTIR) and X-Ray diffraction (XRD). Heliyon 5:e02477. https://doi.org/10.1016/j.heliyon.2019.e02477
Callister WD, Rethwisch DG (2015) Fundamentals of materials science and engineering an integrated approach, 5a. Hoboken, NJ, USA
Chandrasekar M, Ishak MR, Sapuan SM et al (2017) A review on the characterisation of natural fibres and their composites after alkali treatment and water absorption. Plast Rubber Compos 46:119–136. https://doi.org/10.1080/14658011.2017.1298550
Chase MW, Christenhusz MJM, Fay MF et al (2009) An update of the angiosperm phylogeny group classification for the orders and families of flowering plants: APG III. Bot J Linn Soc 161:105–121. https://doi.org/10.1111/j.1095-8339.2009.00996.x
Chase MW, Christenhusz MJM, Fay MF et al (2016) An update of the angiosperm phylogeny group classification for the orders and families of flowering plants: APG IV. Bot J Linn Soc 181:1–20. https://doi.org/10.1111/boj.12385
Chauhan V, Kärki T, Varis J (2019) Review of natural fiber-reinforced engineering plastic composites, their applications in the transportation sector and processing techniques. J Thermoplast Compos Mater. https://doi.org/10.1177/0892705719889095
Chimeni DY, Toupe JL, Dubois C, Rodrigue D (2016) Effect of hemp surface modification on the morphological and tensile properties of linear medium density polyethylene (LMDPE) composites. Compos Interfaces 23:405–421. https://doi.org/10.1080/09276440.2016.1144163
Chung TJ, Park JW, Lee HJ et al (2018) The improvement of mechanical properties, thermal stability, and water absorption resistance of an eco-friendly PLA/kenaf biocomposite using acetylation. Appl Sci. https://doi.org/10.3390/app8030376
Coseri S, Biliuta G, Zemljič LF et al (2015) One-shot carboxylation of microcrystalline cellulose in the presence of nitroxyl radicals and sodium periodate. RSC Adv 5:85889–85897. https://doi.org/10.1039/c5ra16183e
De Carvalho Neto AGV, Ganzerli TA, Cardozo AL et al (2014) Development of composites based on recycled polyethylene/sugarcane bagasse fibers. Polym Compos 35:768–774. https://doi.org/10.1002/pc.22720
del Cerro DR, Koso TV, Kakko T et al (2020) Crystallinity reduction and enhancement in the chemical reactivity of cellulose by non-dissolving pre-treatment with tetrabutylphosphonium acetate. Cellulose 27:5545–5562. https://doi.org/10.1007/s10570-020-03044-6
Delicano JA (2018) A review on abaca fiber reinforced composites. Compos Interfaces 25:1039–1066. https://doi.org/10.1080/09276440.2018.1464856
El Oudiani A, Chaabouni Y, Msahli S, Sakli F (2012) Mercerization of Agave americana L. fibers. J Text Inst 103:565–574. https://doi.org/10.1080/00405000.2011.590010
El Oudiani A, Msahli S, Sakli F (2017) In-depth study of agave fiber structure using Fourier transform infrared spectroscopy. Carbohydr Polym 164:242–248. https://doi.org/10.1016/j.carbpol.2017.01.091
Fan M, Fu F (eds) (2017) advanced high strength natural fibre composites in construction. Elsevier, Duxford, UK
Fangueiro R, Rana S (2018) Advances in natural fibre composites. Springer International Publishing, Berlin
Fernandes EM, Mano JF, Reis RL (2013) Hybrid cork-polymer composites containing sisal fibre: Morphology, effect of the fibre treatment on the mechanical properties and tensile failure prediction. Compos Struct 105:153–162. https://doi.org/10.1016/j.compstruct.2013.05.012
Fiore V, Scalici T, Valenza A (2014) Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites. Carbohydr Polym 106:77–83. https://doi.org/10.1016/j.carbpol.2014.02.016
French AD (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21:885–896. https://doi.org/10.1007/s10570-013-0030-4
French AD (2020) Increment in evolution of cellulose crystallinity analysis. Cellulose 27:5445–5448. https://doi.org/10.1007/s10570-020-03172-z
French AD, Santiago Cintrón M (2013) Cellulose polymorphy, crystallite size, and the segal crystallinity index. Cellulose 20:583–588. https://doi.org/10.1007/s10570-012-9833-y
Gholampour A, Ozbakkaloglu T (2020) A review of natural fiber composites: properties, modification and processing techniques, characterization, applications. Springer, US
Heinze T, El Seoud OA, Koschella A (2018) Cellulose Derivatives. Springer, Cham
Hemmati F, Jafari SM, Taheri RA (2019) Optimization of homogenization-sonication technique for the production of cellulose nanocrystals from cotton linter. Int J Biol Macromol 137:374–381. https://doi.org/10.1016/j.ijbiomac.2019.06.241
Hermans PH, Weidinger A (1948) Quantitative x-ray investigations on the crystallinity of cellulose fibers. A background analysis. J Appl Phys 19:491–506. https://doi.org/10.1063/1.1698162
Hospodarova V, Singovszka E, Stevulova N (2018) Characterization of cellulosic fibers by FTIR spectroscopy for their further implementation to building materials. Am J Anal Chem 09:303–310. https://doi.org/10.4236/ajac.2018.96023
Hyness NRJ, Vignesh NJ, Senthamaraikannan P et al (2018) Characterization of new natural cellulosic fiber from Heteropogon Contortus plant. J Nat Fibers 15:146–153. https://doi.org/10.1080/15440478.2017.1321516
Indran S, Raj RE (2015) Characterization of new natural cellulosic fiber from Cissus quadrangularis stem. Carbohydr Polym 117:392–399. https://doi.org/10.1016/j.carbpol.2014.09.072
Jawaid M, Thariq M, Saba N (eds) (2019) Failure analysis in biocomposites, fibre-reinforced composites and hybrid composites, 1st edn. Woodhead Publishing, Duxford, UK
Jordá-Vilaplana A, Carbonell-Verdú A, Samper MD et al (2017) Development and characterization of a new natural fiber reinforced thermoplastic (NFRP) with Cortaderia selloana (Pampa grass) short fibers. Compos Sci Technol 145:1–9. https://doi.org/10.1016/j.compscitech.2017.03.036
Kan Z, Shi H, Zhao E, Wang H (2019) Preparation and performance of different modified ramie fabrics reinforced anionic polyamide-6 composites. Processes 7:1–15. https://doi.org/10.3390/pr7040226
Karimi K, Taherzadeh MJ (2016) A critical review of analytical methods in pretreatment of lignocelluloses: composition, imaging, and crystallinity. Bioresour Technol 200:1008–1018. https://doi.org/10.1016/j.biortech.2015.11.022
Koronis G, Silva A (2019) Green composites for automotive applications. Elsevier
Kress WJ (2018) “Asparagales”. Encyclopedia Britannica. https://www.britannica.com/plant/Asparagales. Accessed 28 Nov 2019
Kumar A, Sharma K, Dixit AR (2020) Carbon nanotube- and graphene-reinforced multiphase polymeric composites: review on their properties and applications. J Mater Sci 55:2682–2724. https://doi.org/10.1007/s10853-019-04196-y
Kurian JK, Gariepy Y, Orsat V, Raghavan GSV (2015) Microwave-assisted lime treatment and recovery of lignin from hydrothermally treated sweet sorghum bagasse. Biofuels 6:341–355. https://doi.org/10.1080/17597269.2015.1110775
Langhorst AE, Burkholder J, Long J et al (2018) Blue-agave fiber-reinforced polypropylene composites for automotive applications. BioResources 13:820–835. https://doi.org/10.15376/biores.13.1.820-835
Latif R, Wakeel S, Khan NZ et al (2019) Surface treatments of plant fibers and their effects on mechanical properties of fiber-reinforced composites: a review. J Reinf Plast Compos 38:15–30. https://doi.org/10.1177/0731684418802022
LeSar R, LeSar R (2013) Materials selection and design. Introd to Comput Mater Sci. https://doi.org/10.1017/cbo9781139033398.015
Ling Z, Wang T, Makarem M et al (2019) Effects of ball milling on the structure of cotton cellulose. Cellulose 26:305–328. https://doi.org/10.1007/s10570-018-02230-x
Liu W, Fei M, Ban Y et al (2017) Preparation and evaluation of green composites from microcrystalline cellulose and a soybean-oil derivative. Polymers (Basel). https://doi.org/10.3390/polym9100541
Lotfi A, Li H, Dao DV, Prusty G (2019) Natural fiber-reinforced composites: a review on material, manufacturing, and machinability. J Thermoplast Compos Mater. https://doi.org/10.1177/0892705719844546
Lutterotti L, Bortolotti M, Ischia G et al (2007) Rietveld texture analysis from diffraction images. Zeitschrift fur Krist Suppl 1:125–130. https://doi.org/10.1524/zksu.2007.2007.suppl_26.125
Madhu P, Sanjay MR, Jawaid M et al (2020) A new study on effect of various chemical treatments on Agave americana fiber for composite reinforcement: physico-chemical, thermal, mechanical and morphological properties. Polym Test 85:106437. https://doi.org/10.1016/j.polymertesting.2020.106437
Mahato KK, Dutta K, Ray BC (2017) High-temperature tensile behavior at different crosshead speeds during loading of glass fiber-reinforced polymer composites. J Appl Polym Sci. https://doi.org/10.1002/app.44715
Manimaran P, Prithiviraj M, Saravanakumar SS et al (2018) Physicochemical, tensile, and thermal characterization of new natural cellulosic fibers from the stems of Sida cordifolia. J Nat Fibers 15:860–869. https://doi.org/10.1080/15440478.2017.1376301
Manimaran P, Saravanan SP, Sanjay MR et al (2019) Characterization of new cellulosic fiber: Dracaena reflexa as a reinforcement for polymer composite structures. J Mater Res Technol 8:1952–1963. https://doi.org/10.1016/j.jmrt.2018.12.015
Maulidiyah M, Natsir M, Fitrianingsih F et al (2017) Lignin degradation of oil palm empty fruit bunches using TiO2 photocatalyst as antifungal of Fusarium oxysporum. Orient J Chem 33:3101–3106. https://doi.org/10.13005/ojc/330651
Melkamu A, Kahsay MB, Tesfay AG (2019) Mechanical and water-absorption properties of sisal fiber (Agave sisalana)-reinforced polyester composite. J Nat Fibers 16:877–885. https://doi.org/10.1080/15440478.2018.1441088
Mohd Radzuan NA, Tholibon D, Sulong AB et al (2020) New processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts. Compos Part B Eng 184:107644. https://doi.org/10.1016/j.compositesb.2019.107644
Mokbli S, Nehdi IA, Sbihi HM et al (2018) Yucca aloifolia seed oil: a new source of bioactive compounds. Waste Biomass Valoriz 9:1087–1093. https://doi.org/10.1007/s12649-017-9892-2
Moshi AAM, Ravindran D, Bharathi SRS et al (2020) Characterization of a new cellulosic natural fiber extracted from the root of Ficus religiosa tree. Int J Biol Macromol 142:212–221. https://doi.org/10.1016/j.ijbiomac.2019.09.094
Müssig J (ed) (2010) Industrial applications of natural fibres. Wiley, Chichester, UK
Nehdi IA, Sbihi HM, Mokbli S et al (2015) Yucca aloifolia oil methyl esters. Ind Crops Prod 69:257–262. https://doi.org/10.1016/j.indcrop.2015.02.029
Nematollahi M, Karevan M, Mosaddegh P, Farzin M (2019) Morphology, thermal and mechanical properties of extruded injection molded kenaf fiber reinforced polypropylene composites. Mater Res Express. https://doi.org/10.1088/2053-1591/ab2fbd
Noda J, Terasaki Y, Nitta Y, Goda K (2016) Tensile properties of natural fibers with variation in cross-sectional area. Adv Compos Mater 25:253–269. https://doi.org/10.1080/09243046.2014.985421
Ornaghi HL, Poletto M, Zattera AJ, Amico SC (2014) Correlation of the thermal stability and the decomposition kinetics of six different vegetal fibers. Cellulose 21:177–188. https://doi.org/10.1007/s10570-013-0094-1
Britannica, The Editors of Encyclopaedia (2015) “Agavoideae”. Encyclopedia Britannica. https://www.britannica.com/plant/Agavoideae. Accessed 28 Nov 2019
Radzuan NAM, Ismail NF, Radzi MKFM et al (2019) Kenaf composites for automotive components: enhancement in machinability and moldability. Polymers (Basel) 11:1–10. https://doi.org/10.3390/polym11101707
Rajeshkumar G, Hariharan V, Sathishkumar TP (2016) Characterization of Phoenix sp. natural fiber as potential reinforcement of polymer composites. J Ind Text 46:667–683. https://doi.org/10.1177/1528083715591581
Ramphul H, Bhaw-Luximon A, Jhurry D (2017) Sugar-cane bagasse derived cellulose enhances performance of polylactide and polydioxanone electrospun scaffold for tissue engineering. Carbohydr Polym 178:238–250. https://doi.org/10.1016/j.carbpol.2017.09.046
Reddy KO, Ashok B, Reddy KRN et al (2014) Extraction and characterization of novel lignocellulosic fibers from Thespesia lampas plant. Int J Polym Anal Charact 19:48–61. https://doi.org/10.1080/1023666X.2014.854520
Rongpipi S, Ye D, Gomez ED, Gomez EW (2019) Progress and opportunities in the characterization of cellulose—an important regulator of cell wall growth and mechanics. Front Plant Sci 9:1–28. https://doi.org/10.3389/fpls.2018.01894
Schneider CA, Rasband WS, Eliceiri KW (2012) NIH image to imageJ: 25 years of image analysis. Nat Methods 9:671–675. https://doi.org/10.1038/nmeth.2089
Salit MS, Jawaid M, Bin YN, Hoque ME (eds) (2015) Manufacturing of natural fibre reinforced polymer composites. Springer International Publishing, Cham
Sanjay MR, Madhu P, Jawaid M et al (2018) Characterization and properties of natural fiber polymer composites: a comprehensive review. J Clean Prod 172:566–581. https://doi.org/10.1016/j.jclepro.2017.10.101
Sanjay MR, Siengchin S, Parameswaranpillai J et al (2019) A comprehensive review of techniques for natural fibers as reinforcement in composites: preparation, processing and characterization. Carbohydr Polym 207:108–121
Sathishkumar TP, Satheeshkumar S, Naveen J (2014) Glass fiber-reinforced polymer composites—a review. J Reinf Plast Compos 33:1258–1275. https://doi.org/10.1177/0731684414530790
Scherrer P (1912) Bestimmung der inneren Struktur und der Größe von Kolloidteilchen mittels Röntgenstrahlen BT - Kolloidchemie Ein Lehrbuch. In: Zsigmondy R (ed). Springer, Berlin, Heidelberg, pp 387–409
Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794. https://doi.org/10.1177/004051755902901003
Senthilkumar K, Saba N, Rajini N et al (2018) Mechanical properties evaluation of sisal fibre reinforced polymer composites: a review. Constr Build Mater 174:713–729. https://doi.org/10.1016/j.conbuildmat.2018.04.143
Shanmugasundaram N, Rajendran I, Ramkumar T (2018) Characterization of untreated and alkali treated new cellulosic fiber from an Areca palm leaf stalk as potential reinforcement in polymer composites. Carbohydr Polym 195:566–575. https://doi.org/10.1016/j.carbpol.2018.04.127
Shubhra QTH, Alam AKMM, Quaiyyum MA (2013) Mechanical properties of polypropylene composites: a review. J Thermoplast Compos Mater 26:362–391. https://doi.org/10.1177/0892705711428659
Sreenivasan VS, Rajini N, Alavudeen A, Arumugaprabu V (2015) Dynamic mechanical and thermo-gravimetric analysis of Sansevieria cylindrica/polyester composite: effect of fiber length, fiber loading and chemical treatment. Compos Part B Eng 69:76–86. https://doi.org/10.1016/j.compositesb.2014.09.025
Suryanto H, Marsyahyo E, Irawan YS, Soenoko R (2014) Morphology, structure, and mechanical properties of natural cellulose fiber from mendong grass (Fimbristylis globulosa). J Nat Fibers 11:333–351. https://doi.org/10.1080/15440478.2013.879087
Thyavihalli Girijappa YG, Mavinkere Rangappa S, Parameswaranpillai J, Siengchin S (2019) natural fibers as sustainable and renewable resource for development of eco-friendly composites: a comprehensive review. Front Mater 6:1–14. https://doi.org/10.3389/fmats.2019.00226
Thygesen A, Oddershede J, Lilholt H et al (2005) On the determination of crystallinity and cellulose content in plant fibres. Cellulose 12:563–576. https://doi.org/10.1007/s10570-005-9001-8
Todkar SS, Patil SA (2019) Review on mechanical properties evaluation of pineapple leaf fibre (PALF) reinforced polymer composites. Compos Part B Eng 174:106927. https://doi.org/10.1016/j.compositesb.2019.106927
Van Soest PJ (1963) Use of detergents in the analysis of fibrous feeds. 2. A rapid method for the determination of fiber and lignin. J Assoc Off Agric Chem 46:829–835
Vaz S (2016) Analytical techniques and methods for biomass. Springer, Cham
Vinod A, Sanjay MR, Suchart S, Jyotishkumar P (2020) Renewable and sustainable biobased materials: an assessment on biofibers, biofilms, biopolymers and biocomposites. J Clean Prod 258:120978. https://doi.org/10.1016/j.jclepro.2020.120978
Wang F, Zhou S, Li L, Zhang X (2018) Changes in the morphological–mechanical properties and thermal stability of bamboo fibers during the processing of alkaline treatment. Polym Compos 39:E1421–E1428. https://doi.org/10.1002/pc.24332
Webber HJ (1895) Studies on the dissemination and leaf reflexion of Yucca aloifolia and other species. Missouri Bot Gard Annu Rep 1895:91. https://doi.org/10.2307/2992152
Yue Y, Zhou C, French AD et al (2012) Comparative properties of cellulose nano-crystals from native and mercerized cotton fibers. Cellulose 19:1173–1187. https://doi.org/10.1007/s10570-012-9714-4
Acknowledgements
The authors are grateful to Capes and CNPq/Brazil for funding this work and COMCAP – UEM, by SEM microscopies.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
do Nascimento, H.M., dos Santos, A., Duarte, V.A. et al. Characterization of natural cellulosic fibers from Yucca aloifolia L. leaf as potential reinforcement of polymer composites. Cellulose 28, 5477–5492 (2021). https://doi.org/10.1007/s10570-021-03866-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-021-03866-y