A new concept of high-throughput turning of polymers was presented. The concept consisted of a combination of ordinary lathe treatment with simultaneous irradiation of the workpieces by nanosecond electromagnetic pulses. As a result, the material surface structure weakened, which was a prerequisite for increasing the cutting speed. The treatment method and a device for reducing it to practice were developed and protected by patents. Experimental data confirming the effectiveness of the proposed technical solutions were presented.
Similar content being viewed by others
References
O. Yu. Erenkov, Innovative Technologies for Mechanical Cutting of Polymers, KnAGTU, Komsomolsk-on-Amur (2014).
O. Yu. Erenkov, Production and Cutting of Polymer Composites, KnAGTU, Komsomolsk-on-Amur (2014).
V. S. Belkin, V. A. Bukharin, V. K. Dubrovin, et al., Nanosecond Electromagnetic Pulses and Their Application, V. V. Kry mskii (ed.), Chelyabinsk (2001).
E. M. Kartashov, B. Tsoi, and V. V. Shevelev, Strucutral-Statistical Kinetics of Polymer Failure, Khimiya, Moscow (2002).
O. Yu. Erenkov, A. P. Bogachev, S. O. Erenkov, and D. V. Shcherbina, Patent No. 2494864 RF, IPC B29C 37/00, “Method of processing plastic blanks,” No. 2012107300/05, subm. Feb. 28, 2012, publ. Oct. 10, 2013, Byull., No. 28.
O. Yu. Erenkov, S. O. Erenkov, K. Ri, et al., Patent No. 2503538 RF, IPC B29C 37/00, “Method of processing caprolon blanks”, No. 2012151756, subm. Dec. 3, 2012, publ. Jan. 10, 2014, Byull., No. 1.
O. Yu. Erenkov, S. O. Erenkov, K. Ri, et al., Patent No. 2518595 RF, IPC B29C37/00, “Device for caprolon workpiece processing,” Nos. 2012151758, 2012151756, subm. Dec. 3, 2012, publ. Jun. 10, 2014, Byull., No. 16.
O. Yu. Erenkov, S. O. Erenkov, and M. V. Radchenko, “Experimental study of the effect of engineering system condition during turning polymer materials on machined surface roughness,” Chem. Petr. Eng., 49, No. 7–8, 491–494 (2013).
O. Yu. Erenkov and A. G. Ivakhnenko, “Mathematical model of nonlinear vibrations and determination of instability conditions of a processing system during turning,” Uch. Zap. Koms.-na-Amure Gos. Tekh. Univ., No. I-1 (1), 45–51 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 9, pp. 42–43, September, 2015.
Rights and permissions
About this article
Cite this article
Erenkov, O.Y., Sigitova, M.A. New Concept for High-Throughput Turning of Polymers. Chem Petrol Eng 51, 636–639 (2016). https://doi.org/10.1007/s10556-016-0099-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-016-0099-3