Abstract
Processes occurring in the sealing slit of a typical unloaded internal face seal of pump shaft are examined. Data required for designing face seals are recommended.
Similar content being viewed by others
REFERENCES
Lebek, “Bearing capacity in parallel sliding under mixed friction conditions. Part 2: Appraisal of mechanisms,” Probl. Smazki, No. 1, 127–138 (1987).
S. V. Falaleev and D. E. Chegodaev, Contact-Free Face Seal of Aircraft Engines. Foundations of the Theory and Designing [in Russian], Izd. MAI, Moscow (1998), p. 274.
A. I. Golubev and L. A. Kondakov (eds.), Seals and Sealing Technique — A Handbook [in Russian], Mashinosrtroenie, Moscow (1986), p. 464.
V. A. Mel'nik, “Temperature field and temperature deformation of rings of face seal,” Khim. Neftegaz. Mashinostr., No. 8, 29–32 (2002).
M. V. Korovchinskii, Theoretical Principles of Operation of Sliding (Plain) Bearings [in Russian], Mashgiz, Moscow (1959), p. 403.
V. A. Mel'nik, “A simplified method of calculation of working characteristics of face seal,” Khim. Neftegaz. Mashinostr., No. 9, 31–33 (2003).
V. A. Mel'nik, “Shape of surfaces of contact junction of friction pair of face seal. Calculation of characteristics of face seal,” Khim. Neftegaz. Mashinostr., No. 2, 28–31 (2003).
V. A. Mel'nik, “Calculation of deformations of sealing surfaces of rings of face pair caused upon loading of face seal by pressure,” Khim. Neftegaz. Mashinostr., No. 8, 28–31 (2004).
Author information
Authors and Affiliations
Additional information
__________
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 10, pp. 29–32, October, 2005.
Rights and permissions
About this article
Cite this article
Mel'nik, V.A. Working Model of a Typical Face Seal. Chem Petrol Eng 41, 547–552 (2005). https://doi.org/10.1007/s10556-006-0016-2
Issue Date:
DOI: https://doi.org/10.1007/s10556-006-0016-2