Abstract
This paper presents information on development, calibration, and validation of three companion macroscopic modeling approaches for nonlinear analysis of reinforced concrete (RC) structural walls, including: (1) the baseline two-dimensional two-node formulation of the Shear–Flexure-Interaction Multiple-Vertical-Line-Element-Model (SFI-MVLEM), (2) extension of the baseline SFI-MVLEM for modeling of squat walls (SFI-MVLEM-SQ), and (3) extension of the baseline SFI-MVLEM to a three-dimensional four-node element for simulation of non-planar RC walls under multi-directional loading (SFI-MVLEM-3D). The models are implemented in the computational platform OpenSees. Models presented are calibrated and validated against experimental results obtained from tests on RC wall specimens that cover a wide range of physical and behavioral characteristics, including: (1) one slender, two moderately-slender and one medium-rise planar RC walls tested under in-plane loading used for validation of the baseline SFI-MVLEM, (2) three squat planar RC wall specimens tested under in-plane loading used for validation of the SFI-MVLEM-SQ, and (3) one T-shaped and one U-shaped RC wall specimen tested under unidirectional and multi-directional loading, respectively, used for validation of SFI-MVLEM-3D. The comprehensive comparisons between analytically-obtained and experimentally-measured wall responses suggest that the analytical models proposed can accurately simulate both global and local wall responses, within their range of applicability. The models capture load–displacement response features of the walls, including lateral load capacity, lateral stiffness, cyclic stiffness degradation, and pinching characteristics, as well as nonlinear shear deformations and their coupling with flexural deformations during cyclic loading. Comparisons between experimental and analytical results at local response levels suggest that the models can also replicate distributions and magnitudes of wall vertical strains and curvatures at various locations. Overall, the analytical models presented provide robust and reliable tools for nonlinear analysis of RC walls, with a wide range of applicability.
Similar content being viewed by others
References
Belarbi A, Hsu TC (1994) Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete. ACI Struct J 91(4):465–474
Beyer K, Dazio A, Priestley MJN (2008) Quasi-static cyclic tests of two u-shaped reinforced concrete walls. J Earthq Eng 12(7):1023–1053
Brank B, Ibrahimbegović A, Bohinc U (2015) On discrete-Kirchhoff plate finite elements: implementation and discretization error. In: Altenbach H, Mikhasev G (eds) Shell and membrane theories in mechanics and biology, advanced structured materials, vol 45. Springer, Cham
Constantin R-T (2016) Seismic behaviour and analysis of U-shaped RC walls. PhD Dissertation, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
Dazio A, Beyer K, Bachmann H (2009) Quasi-static cyclic tests and plastic hinge analysis of RC structural walls. Eng Struct 31(7):1556–1571
Durán R, Ghioldi A (1990) A finite element method for the mindlin-reissner plate model. SIAM J Numer Anal 28(4):1004–1014
Filippou FC, Popov EP, Bertero VV (1983) Effects of bond deterioration on hysteretic behavior of reinforced concrete joints. Report EERC 83-19, Earthquake Engineering Research Center, University of California, Berkeley
Fischinger M, Rejec K, Isaković T (2012) Modeling inelastic shear response of rc walls. In: 15th world conference on earthquake engineering, Lisbon, Portugal, No. 2120
Fischinger M, Rejec K, Isaković T (2014) Inelastic shear response of RC walls: a challenge in performance based design and assessment. In: Fischinger M (ed) Performance-based seismic engineering: vision for an earthquake resilient society, geotechnical, geological and earthquake engineering, vol 32. Springer, Dordrecht
Gullu F, Orakcal K, Kolozvari K (2018) Nonlinear finite element modeling of squat walls with shear-dominant behavior. In: 11th national conference in earthquake engineering. Los Angeles, CA, ID 1519
Jiang H, Kurama Y (2010) Analytical modeling of medium-rise reinforced concrete shear walls. ACI Struct J 107(4):400–410
Kassimali A (2010) Matrix analysis of structures, cengage learning, Stamford, CT, USA, ISBN-10: 1-111-42620-1
Kolozvari K (2013) Analytical modeling of cyclic shear–flexure interaction in reinforced concrete structural walls. PhD Dissertation, University of California Los Angeles
Kolozvari K, Wallace JW (2016) Practical nonlinear modeling of reinforced concrete structural walls. Spec Issue ASCE J Struct Eng 142(12):G4016001
Kolozvari K, Orakcal K, Wallace JW (2015a) Modeling of cyclic shear–flexure interaction in reinforced concrete structural walls. I: theory. ASCE J Struct Eng. https://doi.org/10.1061/(asce)st.1943-541x.0001059
Kolozvari K, Tran TA, Orakcal K, Wallace JW (2015b) Modeling of cyclic shear–flexure interaction in reinforced concrete structural walls. II: experimental validation. ASCE J Struct Eng. https://doi.org/10.1061/(asce)st.1943-541x.0001083
Kolozvari K, Piatos G, Beyer K (2017) Practical nonlinear modeling of u-shaped reinforced concrete walls under bi-directional loading. In: 16th world conference in earthquake engineering, Santiago, Chile
Kolozvari K, Arteta C, Fischinger M, Gavridou S, Hube M, Isakovic T, Lowes L, Orakcal K, Vasquez J, Wallace JW (2018a, in press) Comparative study on state-of-the-art macroscopic models for planar reinforced concrete walls. ACI Struct J
Kolozvari K, Orakcal K, Wallace JW (2018b) New opensees models for simulating nonlinear flexural and coupled shear–flexural behavior of RC walls and columns. Comput Struct J 196:246–262
Kolozvari K, Biscombe L, Dashti F, Dhakal R, Gogus A, Gullu FM, Henri R, Lowes L, Massone LM, Orakcal K, Rojas F, Shegay A, Wallace JW (2018b) Microscopic modeling of reinforced concrete structural walls. ACI Struct J
Lemnitzer A, Nuñez E, Massone LM (2016) Model verification and assessment of shear flexure interaction in pile foundations. Earthq Struct 11(1):141–163
Los Angeles Tall Buildings Structural Design Council (2017) An alternative procedure for seismic analysis and design of tall buildings located in the Los Angeles region
Mander JB, Priestely MJN, Park R (1988) Theoretical stress–strain model for confined concrete. ASCE J Struct Eng 114(8):1804–1826
Massone LM (2006) RC wall shear–flexure interaction: analytical and experimental responses. PhD Dissertation, University of California, Los Angeles
Massone LM (2010) Strength prediction of squat structural walls via calibration of a shear–flexure interaction model. Eng Struct 32:922–932
Massone LM, Wallace JW (2004) Load–deformation responses of slender reinforced concrete walls. ACI Struct J 101(1):103–113
Massone LM, Orakcal K, Wallace JW (2006) Modeling flexural/shear interaction in RC walls, ACI-SP-236, deformation capacity and shear strength of reinforced concrete members under cyclic loadings, American Concrete Institute, Farmington Hills, MI, Paper 7: 127–150
Massone LM, Orakcal K, Wallace JW (2009) Modeling of squat structural walls controlled by shear. ACI Struct J 106(5):646–655
McKenna F, Fenves GL, Scott MH, Jeremic B (2000) Open system for earthquake engineering simulation (opensees). Pacific Earthquake Engineering Research Center, University of California, Berkeley
Menegotto M, Pinto E (1973) Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending. IABSE Symposium, Lisbon
Miranda E, Aslani H (2003) Probabilistic response assessment for building specific loss estimation. Pacific Earthquake Engineering Research Center, University of California, Berkeley, Report PEER 2003/03
Oesterle RG, Fiorato AE, JohaL LS, Carpenter JE, Russell HG, Corley WE (1976) Earthquake resistant structural walls—tests of isolated walls; appendix a—experimental program; appendix b—test results. Portland Cement Association, Report No. NSF/RA-76081S
Orakcal K, Wallace JW (2006) Flexural modeling of reinforced concrete walls—experimental verification. ACI Struct J 103(2):196–206
Orakcal K, Wallace JW, Conte JP (2004) Flexural modeling of reinforced concrete walls-model attributes. ACI Struct J 101(5):688–698
Orakcal K, Massone LM, Ulugtekin D (2018, in review) A hysteretic constitutive model for reinforced concrete panel elements. Computers and Structures
Orakçal K, Massone LM, Wallace JW (2009) Shear strength of lightly reinforced wall piers and spandrels. Am Concrete Inst Struct J 106(4):455–465
Panagiotou M, Restrepo JI, Schoettler M, Kim G (2012) Nonlinear cyclic truss model for reinforced concrete walls. ACI Struct J 109(2):205–214
PEER TBI (2017) Guidelines for performance-based seismic design of tall buildings. Pacific Earthquake Engineering Research Center, Report No. 2017/06
Penrose R (1955) A generalized inverse for matrices. Math Proc Camb Philos Soc 51(3):406–413
Perform 3D (2005) 3D performance-based design software. Computers and structures Inc
Petrangeli M, Pinto PE, Ciampi V (1999) Fiber element for cyclic bending and shear of RC structures. I: theory. ASCE J Eng Mech 125(9):994–1001
Saatcioglu M, Razvi SR (1992) Strength and ductility of confined concrete. ASCE J Struct Eng 118(6):1590–1607
Taucer FF, Spacone E, Filippou FC (1991) A fiber beam-column element for seismic response analysis of reinforced concrete structures. Report No. UCB/EERC-91/17. Earthquake Engineering Research Center, College of Engineering, University of California, Berkeley
Terzioglu T, Orakcal K, Massone LM (2018) Cyclic lateral load behavior of squat reinforced concrete walls. Eng Struct 160:147–160
Thomsen JH and Wallace JW (1995) Displacement-based design of reinforced concrete structural walls: an experimental investigation of walls with rectangular and t-shaped cross-sections. Report No. CU/CEE–95/06, Department of Civil Engineering, Clarkson University. Postdam. New York
Tran TA, Wallace JW (2015) Cyclic testing of moderate-aspect-ratio reinforced concrete structural walls. ACI Struct J 112(6):653–665
Weng P-W, Li Y-A, Tu Y-S, Hwang S-J (2017) Prediction of the lateral load-displacement curves for reinforced concrete squat walls failing in shear. ASCE J Struct Eng 143(10):04017141
Yassin MH (1994) Nonlinear analysis of prestressed concrete structures under monotonic and cycling loads. PhD Dissertation, University of California, Berkeley
Acknowledgements
This work was supported by the National Science Foundation, Award No. CMMI-1563577. Any opinions, findings, and conclusions expressed herein are those of the authors and do not necessarily reflect those of the sponsors.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kolozvari, K., Kalbasi, K., Orakcal, K. et al. Shear–flexure-interaction models for planar and flanged reinforced concrete walls. Bull Earthquake Eng 17, 6391–6417 (2019). https://doi.org/10.1007/s10518-019-00658-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10518-019-00658-5