Abstract
The decision making of a suitable heating, ventilating and air conditioning system’s set-point temperature is an energy and environmental challenge in our society. In the present paper, a general framework to define such temperature based on a dynamic adaptive comfort algorithm is proposed. Due to the fact that the thermal comfort of the occupants of a building has different ranges of acceptability, this method is applied to learn such comfort temperature with respect to the running mean temperature and therefore to decide the suitable range of indoor temperature. It is demonstrated that this solution allows to dynamically build an adaptive comfort algorithm, an algorithm based on the human being’s thermal adaptability, without applying the traditional theory. The proposed methodology based on the K-Nearest-Neighbour algorithm was tested and compared with data from an experimental thermal comfort field study carried out in a mixed mode building in the south-western area of Spain and with the Support Vector Machine method. The results show that K-Nearest-Neighbour algorithm represents the pattern of thermal comfort data better than the traditional solution and that it is a suitable method to learn the thermal comfort area of a building and to define the set-point temperature for a heating, ventilating and air-conditioning system.
Similar content being viewed by others
References
Ahmad, M. W., Mourshed, M., Yuce, B., & Rezgui, Y. (2016). Computational intelligence techniques for hvac systems: A review. Building Simulation, 9(4), 359–398. https://doi.org/10.1007/s12273-016-0285-4.
Altman, D. G. (1990). Practical statistics for medical research. Boca Raton: CRC Press.
Altman, N. S. (1992). An introduction to kernel and nearest-neighbour nonparametric regression. The American Statistician, 46(3), 175–185. https://doi.org/10.1198/016214507000000932.
Aparicio-Ruiz, P., Barbadilla-Martín, E., Salmerón-Lissén, J. M., & Guadix-Martín, J. (2018). Building automation system with adaptive comfort in mixed mode buildings. Sustainable Cities and Society, 43, 77–85. https://doi.org/10.1016/j.scs.2018.07.028.
ASHRAE. (2013). Handbook fundamentals. Atlanta: ASHRAE.
Barbadilla-Martín, E., Salmerón Lissén, J., Guadix Martín, J., Aparicio-Ruiz, P., & Brotas, L. (2017). Field study on adaptive thermal comfort in mixed mode office buildings in southwestern area of Spain. Building and Environment,. https://doi.org/10.1016/j.buildenv.2017.06.042.
Bermejo, P., Redondo, L., de la Ossa, L., Rodríguez, D., Flores, J., Urea, C., et al. (2012). Design and simulation of a thermal comfort adaptive system based on fuzzy logic and on-line learning. Energy and Buildings, 49, 367–379. https://doi.org/10.1016/j.enbuild.2012.02.032.
Camelo, S. A., González-Lima, M. D., & Quiroz, A. J. (2015). Nearest neighbors methods for support vector machines. Annals of Operations Research, 235(1), 85–101. https://doi.org/10.1007/s10479-015-1956-8.
CIBSE. (2015). Guide A: Environmental design.
Cohen, J. (1960). A coefficient of agreement for nominal scales. Educational and Psychological Measurement, 20(1), 37–46.
Cole, R. J., Brown, Z., & McKay, S. (2010). Building human agency: A timely manifesto. Building Research and Information, 38(3), 339–350. https://doi.org/10.1080/09613211003747071.
Cover, T. M., & Hart, P. E. (1967). Nearest neighbor pattern classification. IEEE Transactions on Information Theory, 13(1), 21–27. https://doi.org/10.1109/TIT.1967.1053964.
Cunningham, P., & Delany, S. J. (2007). K-nearest neighbour classifiers. Multiple Classifier Systems (pp. 1–17). https://doi.org/10.1016/S0031-3203(00)00099-6.
de Dear, R. J., Brager, G. S., Reardon, J., Nicol, F., et al. (1998). Developing an adaptive model of thermal comfort and preference/discussion. ASHRAE Transactions, 104, 145.
Freidman, J. H., Bentley, J. L., & Finkel, R. A. (1977). An algorithm for finding best matches in logarithmic expected time. ACM Transactions on Mathematical Software, 3(3), 209–226. https://doi.org/10.1145/355744.355745.
Griffiths, I. (1990). Thermal comfort studies in buildings with passive solar features, field studies. Report to the Commission of the European Community 35.
Humphreys, M., Nicol, F., & Roaf, S. (2015). Adaptive thermal comfort: Foundations and analysis. London: Routledge.
Hussein, I., & Rahman, M. H. A. (2009). Field study on thermal comfort in malaysia. European Journal of Scientific Research, 37(1), 134–152.
ISO Standard. (2008). ISO 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics. EN 15251.
Jain, A. K. (2010). Data clustering: 50 years beyond k-means. Pattern Recognition Letters, 31(8), 651–666. https://doi.org/10.1016/j.patrec.2009.09.011.
Kang, C. S., Hyun, C. H., & Park, M. (2015). Fuzzy logic-based advanced on-off control for thermal comfort in residential buildings. Applied Energy, 155, 270–283. https://doi.org/10.1016/j.apenergy.2015.05.119.
Kim, J., Zhou, Y., Schiavon, S., Raftery, P., & Brager, G. (2018). Personal comfort models: Predicting individuals’ thermal preference using occupant heating and cooling behavior and machine learning. Building and Environment, 129, 96–106. https://doi.org/10.1016/j.buildenv.2017.12.011.
Landis, J. R., & Koch, G. G. (1977). The measurement of observer agreement for categorical data. Biometrics, 33, 159–174.
Liu, T., Moore, A. W., & Gray, A. (2006). New algorithms for efficient high dimensional non-parametric classification. Journal for Machine Learning Research, 7(c), 1135–1158.
Nicol, F., & Humphreys, M. (2007). Maximum temperatures in european office buildings to avoid heat discomfort. Solar Energy, 81(3), 295–304. https://doi.org/10.1016/j.solener.2006.07.007.
Nicol, J. F. (2011). Adaptive comfort. Building Research and Information, 39(2), 105–107. https://doi.org/10.1080/09613218.2011.558690.
Peng, Y., Rysanek, A., Nagy, Z., & Schlüter, A. (2018). Using machine learning techniques for occupancy-prediction-based cooling control in office buildings. Applied Energy, 211, 1343–1358. https://doi.org/10.1016/j.apenergy.2017.12.002.
Rupp, R. F., Vásquez, N. G., & Lamberts, R. (2015). A review of human thermal comfort in the built environment. Energy and Buildings, 105, 178–205. https://doi.org/10.1016/j.enbuild.2015.07.047.
Shalabi, L. A., Shaaban, Z., & Kasasbeh, B. (2006). Data mining: A preprocessing engine. Journal of Computer Science, 2(9), 735–739. https://doi.org/10.3844/jcssp.2006.735.739.
Song, W. S., Hong, S. H., & Park, T. J. (2007). The effects of service delays on a BACnet-based HVAC control system. Control Engineering Practice, 15(2), 209–217.
Si, Tanabe, Haneda, M., & Nishihara, N. (2015). Workplace productivity and individual thermal satisfaction. Building and Environment, 91, 42–50. https://doi.org/10.1016/j.buildenv.2015.02.032.
Tuohy, P., Roaf, S., Nicol, F., Humphreys, M., & Boerstra, A. (2010). 21st century standards for thermal comfort fostering low carbon building design. Architectural Science Review, 53(1), 78–86. https://doi.org/10.3763/asre.2009.0112.
Valor, E., Meneu, V., Caselles, V., Valor, E., Meneu, V., & Caselles, V. (2001). Daily air temperature and electricity load in Spain. Journal of Applied Meteorology, 40(8), 1413–1421. https://doi.org/10.1175/1520-0450(2001)040<1413:DATAEL>2.0.CO;2.
Vapnik, V., & Vapnik, V. (1998). Statistical learning theory (pp. 156–160). New York: Wiley.
Wang, S., Jiang, W., & Tsui, K. L. (2010). Adjusted support vector machines based on a new loss function. Annals of Operations Research, 174(1), 83–101. https://doi.org/10.1007/s10479-008-0495-y.
Yaşar Sağlam, Ş., & Street, W. N. (2018). Distant diversity in dynamic class prediction. Annals of Operations Research, 263(1), 5–19. https://doi.org/10.1007/s10479-016-2328-8.
Acknowledgements
The authors wish to acknowledge the financial support of project DACAR (Ref. BIA2016-77431-C2-1-R) funded by the Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (MINECO).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Aparicio-Ruiz, P., Barbadilla-Martín, E., Guadix, J. et al. KNN and adaptive comfort applied in decision making for HVAC systems. Ann Oper Res 303, 217–231 (2021). https://doi.org/10.1007/s10479-019-03489-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10479-019-03489-4