Abstract
Surface tension gradients may induce the motions of a floating solid fragment. This mechanism has been employed to drive miniaturized objects on a water surface, which could potentially serve as rotators, mixers, locomotives, and so on. To properly apply these objects, it is important to understand their motions. The previous consideration mainly focused on the horizontal motions of these small objects. In this work, we considered translational and rotational motions of a mm-scaled SU-8 boat in the vertical plane, which were so-called squat and trim phenomena, respectively, in the case of a macroboat. Through two types of tests, we demonstrated that dramatic squat and trim phenomena observed in the motions of the SU-8 boat were mainly induced by the surface tension difference between water and isopropyl alcohol (boat propellant), instead of horizontal movements of the miniaturized boat. This difference created a hollow spot behind the stern and made the boat sink and tilt along the sidewall of the hollow spot. In addition, we found that the motion of a SU-8 boat in a channel included two stages. In the first stage, it was propelled due to the difference between fore-and-aft surface tensions. In addition to moving forward, it also had dramatic squat and trim movements. However, in the second stage, in which no more isopropyl alcohol exited the boat, it was driven by a water wave generated in the first stage and did not show any visible squat and trim phenomena. The results of this work provided a better understanding of motions of the SU-8 boats. These results might also apply to surface tension-driven motions of other miniaturized objects.
This is a preview of subscription content, log in via an institution to check access.
References
Bassik N, Abebe BT, Gracias DH (2008) Solvent driven motion of lithographically fabricated gels. Langmuir 24:12158–12163
Constantine T (1960) On the movement of ships in restricted waterways. J Fluid Mech 9:247–256
Dand IW, Ferguson AM (1973) The squat of full ships in shallow water. Trans R Inst Naval Archit 15:237–255
Gong JP, Matsumoto S, Uchida M, Isogai N, Osada Y (1996) Motion of polymer gels by spreading organic fluid on water. J Phys Chem 100:11092–11097
Luo C, Li H, Liu L (2008) Propulsion of microboats using isopropyl alcohol as a propellant. J Micromech Microeng 18:067002
Millward A, Bevan MG (1986) The behaviour of high speed ship forms when operating in water restricted by a solid boundary. Trans R Inst Naval Archit 128:189–204
Mitsumata T, Ikeda K, Gong JP, Osada Y (2000) Controlled motion of solvent-driven gel motor and its application as a generator. Langmuir 16:307–312
Osada Y, Gong JP, Uchida M, Isogai N (1995) Spontaneous motion of amphoteric polymer gels on water. Jpn J Appl Phys 34:L511–L512
Schofield RB, Martin LA (1988) Movement of ships in restricted navigation channels. Proc Inst Civil Eng 2 85:105–120
Scriven LE, Sternling CV (1960) The Marangoni effects. Nature 167:186–188
Sheng ZB, Liu YZ (eds) (2003) Principles of ships (part I). Publishers of Shanghai Jiao Tong University, Shanghai, China, pp 293–301 (in Chinese)
Su M (2007) Liquid mixing driven motions of floating macroscopic objects. Appl Phys Lett 90:144102
Thomson J (1855) On certain curious motions observable on the surfaces of wine and other alcoholic liquors. Philos Mag 10:330–333
Varyani KS (2006) Squat effects on high speed craft in restricted waterways. Ocean Eng 33:365–381
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Luo, C., Qiao, L. & Li, H. Dramatic squat and trim phenomena of mm-scaled SU-8 boats induced by Marangoni effect. Microfluid Nanofluid 9, 573–577 (2010). https://doi.org/10.1007/s10404-010-0569-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10404-010-0569-4